Hey man. Hope all is well with you. Just wanted some advice my ford ranger does not engage reverse. Shifter goes into reverse but vehicle goes forward as if in 1st Gear. Any suggestions on what it could be ?
Possibly the gate has gone in the box you can take the gearshift out fairy simple to do and look inside see if it's all ok, failing that the box needs to come out and be repaired
@@bazmeredith thanks for the response man. Will have a look. Could it maybe have something to do with the selector as non of the reverse lights or camera come on when the shifter is in reverse position
Baz I am doing this job on the drive now just about ready to remove box are all the bolts accessible with removing the exhaust ?
Do you have to use the special clutch alignment tool?
My dads 2018 ranger is making ticking noises when foot is released from clutch is this the same problem
What was the total cost for then to be done mate? My bt50 has just had the clutch fail 😢
Whats the best way to remove the 2 bolts from behind the exhaust coming off the turbo
If I remember rightly a ratchet spanner
Hey man.
Hope all is well with you.
Just wanted some advice my ford ranger does not engage reverse.
Shifter goes into reverse but vehicle goes forward as if in 1st Gear.
Any suggestions on what it could be ?
Possibly the gate has gone in the box you can take the gearshift out fairy simple to do and look inside see if it's all ok, failing that the box needs to come out and be repaired
@@bazmeredith thanks for the response man.
Will have a look.
Could it maybe have something to do with the selector as non of the reverse lights or camera come on when the shifter is in reverse position
@@aidanperring8063 yes maybe I'd pull the stick out first and just make sure nothing is obvious
A lot of effort😅