ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Roland eDrum Trigger Cones; Comparing and Repairing,
Part 1 of 3 eDrum videos:
1-Cone Comparison and Repair: • Roland eDrum Trigger C...
2-Mesh Head Cleaning: • The Best Way To Clean ...
3-Cone Replacement and Performance Comparison: • Roland eDrum Trigger C...
In this video, I unbox and compare a Roland OEM cone to an aftermarket cone from UFO drums, and add a foam disc to a previously installed UFO cone.
Please leave your comments below, I'd love to hear about your cone replacement experience, or suggestions. Subscribe if you want to see more videos.
Replacement cones:
www.drumland.c...
ufodrums-com.3d...
great vid Tom thanks for taking the time to put it up mate
Great video Tom! I bought a used PD-100 single zone and turned it into a dual zone drum by adding a second piezo (the electronics is already inside the PD-100) following a TH-cam tutorial. I bought the piezo from UFO and while I was at it, I also replaced the PD-100 cone with one from UFO. Working great! UFO has very good products.
Thank you Gilles.
Think acetone would clean the sticky on the piezo better.
I'm trying the Octocone from UFODrums, it gets delivered Friday. Considering doing a video since there's not many repair videos of these on TH-cam.
I'm not a drummer, but our church has a Roland TD-20 drum kit, and have never changed the cones, SO I am pushing for that! What repair might be needed for the cymbals and hi-hat? Thanks!
To my knowledge there is nothing that needs to be 'maintained'... other than if the cymbal is acting defective in some way.
I know this is an old post but I failed to see a conclusion as to how successful were the non-Roland cones!
Thanks for the comment, you're right, I forgot to mention the playing differences in this video. So, in answer to your question: After using both I really didn't feel much difference at all.
You had the Roland OEM cones in your hand! Why in the world did you not install them?
Thank you for asking, I did use the Roland cones in addition to the UFO cone.
Tom what is the secret to obtaining Roland OEM triggers?
They appear to be slightly elusive at this point. I did see that UFO drums have some piezos in stock, but they're not Roland OEM. I would think that they would work just fine. If you can, give them a call, they are very helpful.
Hello,
I bought Convertible Percussion cones and they touch the underside of the heads quite firmly, so they seem to peek if struck dead on.
I am not sure if I know what cones you're talking about, although your assumption is probably correct.
The brand is Convertible Percussions. They touch the underside of the heads quite tightly, so they distort if the cone is struck directly. (You can see the white cone through the head) I don't remember seeing the cone when they were new.
The link to the roland cones dont work, do you have another source?
Thank you for the heads-up, I'm sorry I missed the notification. Here is the link... also above: www.drumland.com/products/roland-black-cone-sensor-cushion?_pos=1&_sid=bb88f1a5a&_ss=r
Hey Tom where can I get the cones,or rather buy ? Thanks man
Hi Alex. Here you go: Replacement cones:
www.drumland.com/products/roland-black-cone-sensor-cushion?_pos=1&_sid=bb88f1a5a&_ss=r
ufodrums-com.3dcartstores.com/...
nice video. but piezo is pronounced pee-ay-zoe,not pee-zee-oh.
Sometimes I have a tendency to see things backwards...😂