Lovely video! Keep it up! Also, just wanted to mention what a lovely guy he is. He is very nice to talk to and gave me great advice and a phone number for a fibreglass man! Look forward to getting it delivered and sorted all out.
Snap i want some koi from tim aswell , tims got great rep with evolution aqua aswell 😀 i was trying to get a bakki shower from evolution aqua but they was having none of it 😅 the money iv got saved from some sales will be going on tims koi
Hi ya Tim your bases in Cheshire? When this lockdown is fully finished I’d love a drive out to your shop and maybe you can show me your filters running and give me a bit of a lesson in nexus filters? Love the videos by the way 👍🏻
need help have pond one air pump fitting 18mm I need to adapt to 8mm air pipe any ideas? The pump came with a rubber tube that is about 18mm but can not seem to find a fitting for my large air stone that has a 8mm pipe.22
It depends whether or not you are gravity flowing into your filtration. If you aren't sure, consider where your main pump is. If your pump is in the pond, then you are pump feeding your filters. If that is the case then your 220 can be any height as long as the output from the filter is above the pond water level. If your pump is not in your pond then the chances are that you are gravity feeding your filters. If that is the case then the water level in your pond will be the same height as the water level in your filter. So if your filter is 1 metre high. Then the bottom of the filter needs to be 1 metre below where the pond water level is. It doesn't matter if the pond is ground level, semi raised or fully raised, as long as you abide by the metre below pond water level rule* *The actual figure won't be a metre, it will be whatever height your filter is. I just used a metre as an example.
Looking good 👍 Nice to see Carl hard at work. He did a fantastic job of my pond !
Nice Neat Work Steve and Carl. Thanks for Sharing Tim.
That’s going to be amazing once that’s done can’t wait to see the next video mate
Nice tidy job look forward to part 2👍
Great video as usual. Received my delivery of koi off you today Tim, tip top condition absolutely mint👌many thanks
Looking forward to the next one,, gonna be a nice tidy design,, love it 👍🏻👍🏻👍🏻
Lovely video! Keep it up!
Also, just wanted to mention what a lovely guy he is. He is very nice to talk to and gave me great advice and a phone number for a fibreglass man! Look forward to getting it delivered and sorted all out.
@IcenI_Koi
3 years ago
Lovely job as usual Tim, timber work around the Nexus was spot on. Who is the fibreglass guy? Stay well & stay safe Tim.
Another great build ,looking forward to see the end result
Evening Tim, think it looks better sunk down in the filter house going be very tidy :) thanks for sharing
Was the only way it would work
Great video as always👍🏻 great insight into koi pond build
Looks fab, can't wait to see part 2 👍
Nice job excellent video Tim
I have added Carls details in the description.
Super my friend good luck 👍👍👍👍👍👍👍👍👍👍
Snap i want some koi from tim aswell , tims got great rep with evolution aqua aswell 😀 i was trying to get a bakki shower from evolution aqua but they was having none of it 😅 the money iv got saved from some sales will be going on tims koi
Lovely job as usual Tim, timber work around the Nexus was spot on. Who is the fibreglass guy? Stay well & stay safe Tim.
Hi ya Tim your bases in Cheshire? When this lockdown is fully finished I’d love a drive out to your shop and maybe you can show me your filters running and give me a bit of a lesson in nexus filters? Love the videos by the way 👍🏻
Anytime
Quality Nishikigoi how much would your delivery charge be to ship a nexus to the Birmingham area ?
Matt Redford free delivery
Very nice set up going on there mate tidy as 👍👌
That pond will be AWESOME! Question though, do you not have to render the insulation before glassing over it?
We mostly use Kingspan or similar
Hi there great video as always what sort of money is it to have a pond that size fiberglassed and do you in the Telford area
Drink every time Tim says Nexus 320
It’s a Nexus 220 on that video
need help have pond one air pump fitting 18mm I need to adapt to 8mm air pipe any ideas? The pump came with a rubber tube that is about 18mm but can not seem to find a fitting for my large air stone that has a 8mm pipe.22
Just wonder what type of fiberglassing product does he use and is that 450gr matting ? Thnx
That’s not Plastic grass is it?
Good video please can you give me the fibreglass number for the guy that installed it
what would something like that set someone back all in ?
Is the guys fibreglass site down doesn’t seem to load for me want to get a quote on how much it would cost
what size air pump do you recommend for nexus 220
Does Carl fibreglass in Birmingham?
What’s Carl’s the fibreglassers number or do I need to give you a ring? Cheers for the video looking nice.
It’s in the description
Just to clarify.. below ground pond's nexus dug in and raised pond's nexus ground level..is that correct
It depends whether or not you are gravity flowing into your filtration. If you aren't sure, consider where your main pump is.
If your pump is in the pond, then you are pump feeding your filters. If that is the case then your 220 can be any height as long as the output from the filter is above the pond water level.
If your pump is not in your pond then the chances are that you are gravity feeding your filters. If that is the case then the water level in your pond will be the same height as the water level in your filter. So if your filter is 1 metre high. Then the bottom of the filter needs to be 1 metre below where the pond water level is.
It doesn't matter if the pond is ground level, semi raised or fully raised, as long as you abide by the metre below pond water level rule*
*The actual figure won't be a metre, it will be whatever height your filter is. I just used a metre as an example.
Hi. Whos your fibreglass guy? Company?
Fish still available for purchase is you have any?
What hight does the raised pond wall have to be for setting up the nexus 320 gravity fed
Wall height can be anything. Important thing to remember is the 320’s base is 950mm below water level.
Whats an average cost of fibreglassing a pond of this size mate
Around £40 a square metre
How do they stick the celotex to the walls buddy?
If it’s dry we use expanding foam
Quality Nishikigoi
Cheers buddy 👍
menit ke 3:10 itu namanya proses apa? dan tujuannya untuk apa??
Hi have you got carls number please cos am flyer my pond been firbaglassed thanks Graham
Why,,lol in the title.?
You didn't add the footage the client sent u
I know, I’m rubbish. Will add on the follow up