I bought a pnp analogue version and then decided to upgrade to HD. Video has helped and will be referred to in the upcoming upgrade of my cinelog25 when the vista arrives
@@Stevieboyfpv it's been a game changer on my other quads. Was scratching my head to see where everything would fit. Crossfire being the worry so good to see how you did it. Thanks man
The same here! Waiting for my caddx polar actually and I was looking for someone who would do the work for me. After this vid definitely I am going to do it myself, thanks!
Great build video! I plan to build a DIY build also with this same quad. Thanks for this. Now i can watch this while i build mine. But i will be using different AIO and motors. Thanks again.
Thanks, a really useful guide to an HD build for this, and review of. After getting the pre-built analogue version went and built the HD version which is equally as impressive, more so with the digital feed and strong video signal. Have a betafpv 95xv3 with caddx vista too, but this blows it away as you say in many ways. Still experimenting with different battery combinations and smaller cameras.
@@Stevieboyfpv indeed, there seem to be some other decent ones out there now like the kopis 25 (apparently), but this one is a winner as far as I'm concerned for that kind of size. The cinelog 35 is great as well, though quite a different beast, nice review of that too.
I've no experience with at flight controller but 35a is nice! Albert Kim just reviewed some new t motor 1604 I think looked like a nice upgrade over the 1404 might be worth a look at
@@Stevieboyfpv oh great man. Thanks for the advice. I will definitely check it out. Thanks again. Keep doin what u do. It's helps a lot of new pilots like me. 😁
Hi, thanks for making this video. I am making the same quad using the same 20A AIO FC. Is it safe to connect the Caddx V and G to the + - terminals of the battery pads just like you did ? The manuals says that too about the DJI version. what if it might burn the VIsta ? i will be using 4S battery.
Hiya mate, just converted from analog to digital. My vista camera doesn't fit into the original camera mount as it like 1mm thicker, did you buy or print another fpv camera mount? Thanks fella, top video.
Hello, I have spare 1404 3850kv motors I don't use, do you think I could use them on a cinelo25 in place of the 4500kv and still have a great flying machine?
5.40mins in shows the binding process for dji goggles to caddx vista. This was a build video it is assumed you know how to bind the goggles if your attempting a build sorry
Does the CLI also work if I use a different Flightcontroller from GepRC? Or should I only apply the pid tune? or get a preset from somebody else in BF?
So I did not do a full dump before I upgraded my firmware and lost the configs for the flight controller offset. Can you share your dump so I can extract the values I need that would be greatly appreciated.
I assume you are talking about the bnf pre built version. If so yes you can plug that straight into the beta fpv naked gopro bec board as long as its the correct jst plug for the board the voltage is fine as this is a 4s quad 👍
My Cinelog 25 has 3.20kHz of Gyro Frequency and 1,60kHz of PID Loop Frequency, your is diferent in Betaflight I'me having some problems with my new Cinelog 25, i still could flight it. Can I send here a link with my video problem for you try to help me? Can I sendo you a video with my working and some explanation off my settings? Thank you so much
Does the geprc 25 support video transmissions other than the 'low latency' setting? Mine is locked in low latency, and does not offer the 'high definition' setting that my other caddx camera offers (on my flywoo LR).
It will depend on what camera yours came with if it was the polar pro then it won't have all the options you will need a nebula pro or pro nano or original caddx/dji camera to connect to your caddx
Hello Stevie. My new cinelog C25 Analog don’t wok. Every thing it was fine (start music complet), I solder the ELRS Nano 2.4 , I’ve bind it with the Radiomaster tx16s when is link to the PC by USB, but don´t start and show the red LED only. With out start music: Any ideia? Thank you
@@Stevieboyfpv all good in betaflight USB connection, with batteries nothing works, but have a red led. Maybe is the inverter 9v to 5V dead. But is a new cinelog 25
@@antoniofilipe70 1.Check battery is fully charged. 2.check switches are working in modes on beteflight and that no modes are over lapping or doubled. 3.check the reciever is set up correctly in in "configuration " in betaflight for express elrs.
@@Stevieboyfpv I've made this video explaining my problem with a new cinelog 25. (th-cam.com/video/6hwWues7apI/w-d-xo.html) can you help me? thank you so much
Yes its possible it shows you how and where to wire in the flight controller diagrams. You can find them on geprc's website or they come with the board on purchase
Yes just copy the components from the cinebot 30 and follow along, then use the geprc cinebot 30 cli dump instead of the 25 and you should be all good 👍
![☀ Братишка большого синелога, но смысл тот же. [GepRC Cinelog25 V2 O3]](http://i.ytimg.com/vi/sxW1ygJ9Soc/mqdefault.jpg)
![☀ Братишка большого синелога, но смысл тот же. [GepRC Cinelog25 V2 O3]](/img/tr.png)
Thanks for being generous in sharing your build especially cinelog25. Have a good day ahead!
Welcome! Thanks for stopping by!👍
Awesome and great build. Thanks for sharing. I hope to speak on camera as well as you my friend
Thanks a lot buddy! Always appreciate your comments and support 🤜🤛🙏🏼
I like the beautiful drone video, Dear friend, I will come to see a good video again 👍😍🇰🇷🌷🤗
아름다운 드론영상 좋아요👍🥰🤩🇰🇷🌷👍
Thankyou very much!😁🙏🏼🙏🏼
I bought a pnp analogue version and then decided to upgrade to HD. Video has helped and will be referred to in the upcoming upgrade of my cinelog25 when the vista arrives
That clear hd is a winner! Glad it helped dude!🙏🏼 such a quality little cinewhoop
@@Stevieboyfpv it's been a game changer on my other quads. Was scratching my head to see where everything would fit. Crossfire being the worry so good to see how you did it. Thanks man
@@H78FPV yeh its a little bit of a squeeze just don't make the wiring too short so you have options 👍
The same here! Waiting for my caddx polar actually and I was looking for someone who would do the work for me. After this vid definitely I am going to do it myself, thanks!
Great build video! I plan to build a DIY build also with this same quad. Thanks for this. Now i can watch this while i build mine. But i will be using different AIO and motors. Thanks again.
Nice One!👍 glad to help!
Un super video, como siempre bien detallado y bien explicado. Me encantan tus vídeos. No cambies nunca , un saludo desde Francia 😉
Thankyou!🙏
Thanks, a really useful guide to an HD build for this, and review of. After getting the pre-built analogue version went and built the HD version which is equally as impressive, more so with the digital feed and strong video signal. Have a betafpv 95xv3 with caddx vista too, but this blows it away as you say in many ways. Still experimenting with different battery combinations and smaller cameras.
Glad if it helps! 😁 yeh the betafpv can't touch it and there is nothing like hd👌
@@Stevieboyfpv indeed, there seem to be some other decent ones out there now like the kopis 25 (apparently), but this one is a winner as far as I'm concerned for that kind of size. The cinelog 35 is great as well, though quite a different beast, nice review of that too.
@@achristofides cheers dude!👍
Thank you so much for sharing this brother, really appreciate the value you provide to beginners getting into FPV
Cheers dude! Welcome!👍🙏🏼👊
I plan to use a Jemchu 35a pro aio. Foxeer Datura 1404 3850kv motors.
I've no experience with at flight controller but 35a is nice! Albert Kim just reviewed some new t motor 1604 I think looked like a nice upgrade over the 1404 might be worth a look at
th-cam.com/video/V8V6V96fFuo/w-d-xo.html
@@Stevieboyfpv oh great man. Thanks for the advice. I will definitely check it out. Thanks again. Keep doin what u do. It's helps a lot of new pilots like me. 😁
@@jasflyfpv9655 🙏🏼🙏🏼
Nice very nice and very useful ... Thanks stev, thanks a lot 👍
Hi, thanks for making this video. I am making the same quad using the same 20A AIO FC. Is it safe to connect the Caddx V and G to the + - terminals of the battery pads just like you did ? The manuals says that too about the DJI version. what if it might burn the VIsta ? i will be using 4S battery.
If I did it in the video its safe 👍 the vista can take 4s no problem it can go up to 6s
@@Stevieboyfpv Thanks man. :))
@@madeinhimalayas no worries happy I could help👍
Hiya mate, just converted from analog to digital. My vista camera doesn't fit into the original camera mount as it like 1mm thicker, did you buy or print another fpv camera mount? Thanks fella, top video.
Hey man, my frame kit came with 2 different size camera mounts.
This is a thingiverse file for the nebula pro
www.thingiverse.com/thing:4878109
@@Stevieboyfpv hmm checked mine, they didn't supply it. Would your mate be able to print that do you think?
@@craigdavo yeh man 3d-aqua send him the link he will sort you out 👍
@@Stevieboyfpv Superb. Cheers fella.
Hello, I have spare 1404 3850kv motors I don't use, do you think I could use them on a cinelo25 in place of the 4500kv and still have a great flying machine?
I think they would work ok 👍
Amazing video! It helped me a lot, keep it up 👍🏻
Nice one! Glad it helped!🤟😊🙏🏼
This is awesome. Well done and thank you
Thankyou! Hope and glad if it helps 🙏
Dude how do you set this stuff up I have a new drone and all it does is come on with a blue light flashing
Nice work, thank you! I did not see how to get the DJI goggles to work with it tho
th-cam.com/video/u2zU2GPvt6g/w-d-xo.html
5.40mins in shows the binding process for dji goggles to caddx vista.
This was a build video it is assumed you know how to bind the goggles if your attempting a build sorry
Does the CLI also work if I use a different Flightcontroller from GepRC? Or should I only apply the pid tune? or get a preset from somebody else in BF?
Only take the pid tune if the board is different 👍
Everyone doing the dji on the 2.5" u don't think it gets a lil heavy? I'm trying to run hero10 bones
Flys great obviously analogue is lighter and any weight save is better for performance
Discount code in the description 👍
Nice video! Did you use the stock PIDs and rate settings ?
Thanks very much yes imported and cli dumped the factory settings from geprc website and those are what I flew in the video 👍
So I did not do a full dump before I upgraded my firmware and lost the configs for the flight controller offset. Can you share your dump so I can extract the values I need that would be greatly appreciated.
In the video I show where to go and get the dump from geprc 👍
Thank you so much, that’s the one part I skipped. You have a new subscriber 😀
@@dj1da952 welcome! Thanks!🙏🏼
Awesome video!
Can I hook up the caddex peanut to the wires that's coming out of the get RC Center lock 25
Yes 👍 the peanut is supplied with a vintage regulator supposedly itcan handle 2-6s so the geprc cinelog being 4s means it should be no problem
Is the jst that comes out of the fc okay to attach to the bec beta fpv or do you need an adapter?
I assume you are talking about the bnf pre built version. If so yes you can plug that straight into the beta fpv naked gopro bec board as long as its the correct jst plug for the board the voltage is fine as this is a 4s quad 👍
@@Stevieboyfpv Many thanks, greetings from Italy
How it hold the winds outside? Like a normal wind not a strong one
Compared to my other 2.5 inch cinewhopps which shudder and propwash in a breeze this one handles a mild wind with no effect on the video
My Cinelog 25 has 3.20kHz of Gyro Frequency and 1,60kHz of PID Loop Frequency, your is diferent in Betaflight
I'me having some problems with my new Cinelog 25, i still could flight it. Can I send here a link with my video problem for you try to help me? Can I sendo you a video with my working and some explanation off my settings? Thank you so much
I think you need to contact geprc for advice
@@Stevieboyfpv Did you install a Express LRS Receiver ? If yes to UART 02?
I followed your video to build mine! thanks!
Awesome! Stoked to of helped!😁🙏🏼 Happy flying🤟
антенный разъем на передатчике(аналоговый) легко ломается, пришлось запаивать его.
Nice man! looks sick
They are quality little rippers for the naked for sure!🤜🤛
Does the geprc 25 support video transmissions other than the 'low latency' setting? Mine is locked in low latency, and does not offer the 'high definition' setting that my other caddx camera offers (on my flywoo LR).
It will depend on what camera yours came with if it was the polar pro then it won't have all the options you will need a nebula pro or pro nano or original caddx/dji camera to connect to your caddx
@@Stevieboyfpv that seems to be the case thank you for your reply
@@hattrickFPV no worries 👍
@@Stevieboyfpv and just like that my flywoos camera is now installed on my geprc :D for someone new to the hobby that got me sweating.
@@hattrickFPV congrats! That's one fpv skill ticked of the list! 👍
amazing bro
Hello Stevie. My new cinelog C25 Analog don’t wok. Every thing it was fine (start music complet), I solder the ELRS Nano 2.4 , I’ve bind it with the Radiomaster tx16s when is link to the PC by USB, but don´t start and show the red LED only. With out start music:
Any ideia? Thank you
Do you mean it doesn't link to the pc or it doesn't work now you've connected the elrs reciever?
@@Stevieboyfpv all good in betaflight USB connection, with batteries nothing works, but have a red led. Maybe is the inverter 9v to 5V dead. But is a new cinelog 25
@@antoniofilipe70 are both controller and reciever been updated to the same firmware?
@@Stevieboyfpv Yes all by the new up date.
@@antoniofilipe70 1.Check battery is fully charged.
2.check switches are working in modes on beteflight and that no modes are over lapping or doubled.
3.check the reciever is set up correctly in in "configuration " in betaflight for express elrs.
The ELRS is connect to the UART 2 or UART 1?
The reciever should be uart 2.
I have no experience of elrs.
My gyro frequency is 8.00khz
My pid loop frequency is 4.00khz.
@@Stevieboyfpv Thank you for your feedback. I was no lucky with mine,
@@antoniofilipe70 hope you get there 🤞🙏🏼
@@Stevieboyfpv Thank you my friend
@@Stevieboyfpv I've made this video explaining my problem with a new cinelog 25. (th-cam.com/video/6hwWues7apI/w-d-xo.html) can you help me? thank you so much
can i do with express elrs ?
Yes no problem 👍
How to install GPS on Cinelog25? Is it possible?
Yes its possible it shows you how and where to wire in the flight controller diagrams. You can find them on geprc's website or they come with the board on purchase
wow awesome 👏🏽🔥
Cheers dude!👊🙏🏼
Amazing 👍
Thanks!👍🙏🏼
Your so clever x
Thanks Sam! 🙏🏼
Will it work for Cinebot 30?
Yes just copy the components from the cinebot 30 and follow along, then use the geprc cinebot 30 cli dump instead of the 25 and you should be all good 👍
@@Stevieboyfpv I have a PNP receiver, so can I use the CLI for Cinebot 30 HD TBS 4.3.1?
@@RonniePatiyal if geprc don't have a clip for your reciever you will have to change your reciever options in configuration
@@Stevieboyfpv Thank you bro :)