setting controller votol selft learning for fiido bldc or any bldc

[@pattinan12]

I would like to recommend the auto learning votol em260s.

[@learnwithfaisal5516]

I have em.70 and the issue is battery over and under voltage settings restore when we restart the controller plaese solve this issue

[@Makinist]

I could do this self learning last year for the original motor of my quad.
I replaced my motor with a new one. photo of the new motor is as below. 72v BLDC 1500 watt motor.
I tried lots of methods to make it self learn but when I open the power, the motor spins always backwards with lots of vibration and pole pair & hall angle numbers don't change any.
Can you suggest me a solutşon please?
Can you share a .bin file for self learning?
thanks in advance.

[@dennydifaso2017]

To change forward or backward, it is on page 3 of the hall shift angle column, make it minus or plus, while for pole pair you must know the data sheet from your motorbike's dynamo. (cmiiw)

[@johnpaulodelrosario6904]

I have 72v 2000w 45h bldc hub motor.. how many pole pairs does it have?

[@dennydifaso2017]

must be adjusted to the datasheet of your motorbike, or you can give a value of .16-24-28. (cmiiw)

[@ABritInNY]

Different motors have different amounts of pole pairs. Most likely you have a 9c clone so 23 pole pairs, but newer QS hubmotors have 16 pole pairs

[@sonhaikhuc]

I am using em100 for the middle motor, capacity 2500w, peak range 3.2-3.5kw. Can you show the smoothest running parameters possible? Thank you very much​ @dennydifaso2017

[@dennydifaso2017]

-change the parameters in the mid flux-weakening value and hige flux-weakening value columns (adjust to your motorbike data sheet) -change the pole pair column (adjusted to your motorbike data sheet) -changed the soft start grade column..cmiiw

[@jatanlimbasiya3018]

Could you please explain what is Port Setting for? In my Votol Em-100 I put everything to empty_function, still the motor is running. What it does?

[@dennydifaso2017]

You can individually change the port settings to suit how you connect them to the speed switch, brake, cruise etc.(cmiiw)

[@jatanlimbasiya3018]

@@dennydifaso2017 Understood. Do you have a self learning file for the VOTOL EM100?

[@dennydifaso2017]

for how many watts and bldc type?

[@sn99985]

Apa harus di pb3 yg d ubah? di votol saya pb3 24speed limit, ganti ke LY e-gear, roda diam cm bunyi dengung,

[@dennydifaso2017]

Pb3 ( 1:empty function)
.Kemungkinan hall shift angle nya belum ketemu. cmiiw

[@davidromero1201]

What are the parameters to configure page 2 flux

[@dennydifaso2017]

must be adjusted to how many kw dynamo (cmiiw)

[@heydarfernandezcapote804]

Buenas he intentado pero no me sale pudieras ayudarme saludos desde cuba

[@dennydifaso2017]

Tal vez se perdió algo en el proceso...cmiiw

[@heydarfernandezcapote804]

No es que lo hago igual que usted pero no lo hace la caja mia es una votol EM100sp

[@dennydifaso2017]

@@heydarfernandezcapote804
¿Qué tipo de obstáculos tienes?

[@gerardopereyra3989]

Hola saludos de Uruguay tengo un votol ME 30s lo compre para practicar la programación venia bien pero algo cambie en la pagina Settings Download por dejo de funcionar no se comunica con el software la pc reconoce si la interfaz el votil tiene 60v y tiene 5v tambien que pude a ver cambiado restaurar de fabrica tiene

[@Maunyacepat]

Mas controller UNIVERSAL bisa di seting gak? Mas

[@dennydifaso2017]

Ga bisa om

[@muhamadarbaialfalah4317]

gan ada settingan votol untuk bldc fiido q1 standar gk?

[@nobieanynomous2424]

ini votol seri em berapa mas?

[@dennydifaso2017]

EM 100 v4

[@danielhejira899]

❤

[@pesizan7352]

Aku nyoba2 sesuai petunjuk koq ga ada perubahan ya om

[@dennydifaso2017]

Hidup dan matikan power lewat kunci kontak dan tidak keluar dari aplikasi,nanti dinamo akan maju atau mundur sesaat.