How to Create a Multi Color Screen Print using the xTool Screen Printer
ฝัง
- เผยแพร่เมื่อ 22 ม.ค. 2024
- Subscribe to my channel:
/ @karleyhall
WATCH THIS VIDEO FIRST:
• How to Set Up the New ...
If you'd like to buy any of the items shown in this tutorial, check out the links below. Some links are affiliate links. By clicking on these links I may earn a small commission at no cost to you. Some products may have been provided to me by vendors, however, all opinions and reviews are strictly my own.
Shop Here for All Products:
✔️ xTool Screen Printer: bit.ly/3RD1AZH
Level up your laser safety & creativity! Trade in your open diode for an enclosed xTool with up to $500 off: bit.ly/3UcIrQc
✔️ xTool D1 Pro: amzn.to/48MIB56
Shop My Cricut Faves Here: www.amazon.com/shop/karley.hall
Shop My Favorite Vinyl Here: www.143vinyl.com/starcraft-hd...
*use code KARLEY
Website: karleyhall.com/
TH-cam: / @karleyhall
Instagram: / karley.hall
Facebook: / karleyhallcreative
Facebook Group: / cricutcraftswithkarley
*Disclaimers
Some links above are affiliate links. By clicking on these links I may earn a small commission at no cost to you. Some products may have been provided to me by vendors, however, all opinions and reviews are strictly my own.
Karley Hall will not be liable to You or anyone else for any decision made or action taken in reliance on the information given by this video or for any consequential, special or similar damages, even if advised of the possibility of such damages. - แนวปฏิบัติและการใช้ชีวิต
Just a few tips. I’ve screen printed for a few years. You don’t clean the screen between shirts. I would only make one pass with the squeegee, not two, unless you see a problem. Don’t press too hard, keep an angle to the squeegee, too vertical and it doesn’t screen well. Lastly, keep the image smaller than your widest squeegee. It only causes problems to do multiple passes. Also, white ink is a pain. It is thicker than any other ink. Some brands are better than others when it cones to consistency.
Thank you so much for the tips!! I really appreciate it- I will definitely use this advice moving forward!
I agree, you don't wash teh screen between shirts, but, you might want to try flooding the mesh before taking the screen off the press, so that it shouldn't dry in the screen as quickly, amd keep the edges crisper
Also, I saw that you were pushing the screen down and locking it in place for each color, you shouldn't need to adjust the height after you start, the screen should be set and locked in at 1/16" to 1/8" of what is referred to as 'off contact' when you squeegee, you actually stretch the screen down that small distance, and when you release the squeegee pressure the screen returns to the off contact distance, and disconnects the sceen from the shirt right away, with the off contact you shuldn't have an issue with the shirt pulling up when you lift the screen. Consistency grows when you change less between items. You have to swap the screens, you have to swap the substrate, you don't need to adjust the height or position on each item. You would need to readjust the off contact if you switched from something like tee shirts to tote bags, that are usually a thicker fabric. Good luck, have fun, and thanks for sharing
No.1 good work…where to get more coated screens so u can do more images where to order them
I appreciate that you share your learning process. Too many only share immediate success. I'm learning to use mine, too. White gave me challenges too.
Great video u ain't hiding nothing thank u
I love your design. You did an amazing job, considering how long this process takes. I think the seams in a t-shirt are an issue no matter what type of process you may use.
Karley, beautiful video.Actually, just bought my own XTool this morning, can't wait to have it. But washing your video gives me a great tutorial and things to watch out for once I get started. Thank you..
Cool video. I'd suggest looking into "flooding" your screens between prints. You don't want any ink (water based or not) drying in the mesh as it will clog the individual squares/pores that make up the messhx and distort your image. There are lots of YT videos showing methods for different comfortability/experience levels ie: push vs pull methods for screening, types of inks + curing method/time, registration marks to allign designs and flooding/amount of passes per design.
Thanks for doing this video! I would be interested in knowing if you need to wash the screen between each application and which ink will last longer in the wash?
Is your speed ball ink also water based? Thanks for the video, I have been nervous to try mine! Great tutorial
Question! You would have to buy new coated screens for each design? And if so, how much are the screens?
Mornin' :) I have an M1, so it looks like I won't be doing any screen prints anytime soon. I have done a five color HTV shirt where I used registration marks in the upper corners to line up each color. Having zero experience with screens, would it be possible to add a circle at the top center of your design so you can see through the screen, then place a round sticker on the shirt in a corresponding place? That way you're lined up, and the ink in the circle goes onto the sticker which you peel off when you're done. Would that work?
Nice. Not having to do the uv is great. Think lightly damping the shirt helps and baking at 300f. Don't take my advice. One screen and painting and masking different colors is fun.
3hrs?
QUESTION:: When you take the screens out of the frames to do more projects how do you get the multi-colored screens back in the frames all aligned for more multi-colored screenprinting? Can you do this?
Technically you can. I haven’t tried. I left mine in the frames. But if you put them back in the frames, you’re theoretically able to use the adjustment knobs to get them lined up.
They REFUSE to support their screen printing XTool use with D1 and will NOT sell extra screens and materials! TOTAL scam!
I was able to order extra screens in packs of 4 through their website.
I saw extra screens for sale on xtool