Hi, thanks as always! But now they released FSR3 do you think it’s worth it??? Supposedly “Doubles” fps but what about input delay and visual quality, Have a good day.
hello, in nvidia profile inspector the settings you usually recommend have changed, they are no longer available, do you have a video now or in the future to adress that matter ??? thanks for everything you do for the community !!!
AMF FSR 3.0 Frame Generation is amazing as of Feb 2nd 2024 on the latest AMD Drivers For those on AMD cards, just make sure you have Anti-Lag turned on inside the Adrenalin Software, but Enable the frame gen in the game. Whatever FPS your game is capped at in game, Frame gen will almost double that; but because we have Anti-lag turned on from before, that hit in latency from AMD FSR 3.0 Frame Gen is minimal. Cheers everyone!
Have to comment here. My rig rocks a 5700G and a RX6700XT w/16 vb RAM. without this settings I was having 90/110 FPS and after this I’m achieving 140+ even 160. THANK YOU❤️❤️❤️❤️❤️
Bro I appreciate you I’m not gone lie I was randomly searching through settings videos and just watched your full video … and man I must say your a wizard lol my aim is 100% better thanks to you
I usually have between 100-140fps and I did everything you said in the video. It went to 280-300fps. As I stream the game as well I wanted to get some quality back so I increased some settings and Im still getting 200-220fps and the quality is great. THE BEST VIDEO ON TH-cam ! THANK YOU SO MUCH.
Not only does frane generation introduce a ton of latency, it also introduces stutter and also just looks jittery. a 300fps cap without frame generation looks smoother than 300+fps with frame generation
You'd think a video like this would be for those with a below average pc. Seems like this is geared for people who already get high frames to go even higher. Would be awesome if you made a video for those struggling to get good frames
you have "focused mode" mixed up. It's a great setting if you have multiple monitors. It's a dimming switch for the brightness of the second monitor. A setting of zero leaves the second monitor at full brightness, a setting of 100 makes the second monitor completely black. I set mine at 70, which brings my second monitor to 30% brightness which allows me to "FOCUS" on the game better. It's a really good setting to use if you have 2 monitors and play in a dimly lit room.
@@iamdaviddrew my understanding is that if you had single monitor, and the game playing in a window (not full screen) everything outside of the game window would be dimmed
This is old video? AMD FSR 2.1 has been replaced in this update by 3.0 version. Would like to know if this is any better, worse, same as 2.1? Probably should actually play the game before chucking a video out
Was sitting around 65-110 fps @90fov Did the mentioned changes BUT used amd fsr3.0 and frame generation And getting 175-200+ fps @ 120fov Also seems my packet loss and extrapolation issues may be reduced or gone but ill need to play a couple dozen games to see Should also mention I'm on a ryzen 5600x with a Rx 580 8gb and 64 GB ram fully overclocked. (Upgrading soon to a 5800x3D and 7800xt)
I was sitting 110 avg at fps. I notices turning only FSR boosted my fps by 10/20 though hell broke loose when I enabled AMD Frame Generation now I am getting 250+ constant. I did not that Frame generation option does cause some images to look a bit off though I feel getting 100 fps boost is the best deal I can get.
@@karma5319same here. 90-120 but typically in the 110 range. turned it on and it got to over 300 frames and my game crashed. i have my fps capped at 165 too and it went that high. but my game was crashing on fidelity cas (which is what i normally run) as well so i think it’s just the game and the update.
@@karma5319 only real big difference i have seen in the 3 hours gaming since my original comment is grass looks absolutely horrible and trees from afar are jagged asides from that anything nearby looks fine player models look fine no weird ghosting or screen tearing.
@FourEyes Hi bro.. thank you for the video.. i have 1070ti 8gb VRAM 16gb RAM.. which VRAM SCALE should i put playing while streaming with OBS to not have any problems.. maybe 70% ? i get 100 fps only gaming and 80 fps gaming + streaming
Thank you so much for the updated video! I watch everyone of your optimizations. I do have a question for you, I have a 4090 with a Ryzen 9 7950x3d what should I set my renderer worker count to in the config file? Also are there any settings you would adjust with my above specs? Thank you again appreciate all you do!
I’d honestly settle for being able to play with friends can’t update up weapons screen keeps flicking to fetching profile and joining game session and can’t get my loadout from the game without it freezing and sounding like an indicator
I cant do it 😅 I prefer cranking the settings up, and using AMD Adrenalin to lock the FPS with chill and get sub 4ms latency, I like the immersion and look. If you want to be competitive and max the FPS out with these settings for sure.
I got a 4070 and I run fidelityfxcas at 70 with DLSS frame generation on and my latency is great, so I’m not sure what you mean by bad latency cause I’m not seeing that at all
Crazy to me that you mentioned Path Tracing again, but AGAIN failed to mention that it only affects the main menu and shooting range... It literally does not affect your in-game performance, because it's not even on during gameplay. It's not a hard thing to clarify. Just do it. Path Tracing will probably be introduced in the next Call of Duty release; and this is simply them testing it out beforehand. A bit odd, but there you have it. It does look INCREDIBLE though.
did you record the video before the reload season came out? FSR3 is not in the settings, how can you talk about the settings if you don't know how they behave in the new season?
Resizable bar works fine if you dont use custom profiles in the nvidia control or nvidoa profile inspector. If you used custom profiles..say choose cod.exe..You will cause issies with resizable bar if you have the custom profile It disables itself even though tje config file has it set to false. If you want resizable bar on warzone...disable the custom profiles and just have nvidias set scross the boar. Issue sorted.
Are it so for the render worker count for cores? There's a debate with an AMD CPU for you to use half your cores. Have you heard about that? Community?
Bro... I was using your settings and was able to play perfectly on my HP Gaming Laptop (GTX1650, 16gb RAM, Intel Core i5), and now since a couple of day I cannot get more than 45fps on average, sometimes dropping below 30, it is unbearable... please help me fix this!!!!
Good afternoon. I am a subscriber and I come to you after every new update. Favour ... can you just run through the optimal settings without explaining them? I've heard why I should and shouldn't have certain things on or off and high or low so many times I trust you. Just low - off - very low - high ... etc
wait so if i have 16 cores ND 24 THREADS AND 8 OF THOSE 16 CORES ARE PREFORMANCE CORES AND THE OTHER 8 ARE EFFICIENCY CORES DO I USE 8 OR 16 IN THAT NUMBER
You said you were going to show us a better way to downscale our resolution that wasn’t in the game menu? Edit: this actually helped so much that I can play the game in 1440p now!!!
The FSR (now version 3.0 in-game) does just that. It is rendering the game at a lower resolution, then upscaling to your monitor's display resolution using advanced techniques. It is recommended to set the preset to balanced or performance, then turn off frame generation.
Ive always used your videos for Battlenet Call of Duty, but I have a question about Steam Call of Duty. No matter what I do I always have blocky pixelated video in game. The ONLY way I have figured out how to fix it at the beginning of each match is to switch it Extreme graphics & back to Ultra. But when & if I go into Gulag, I have to do the same thing again & then again when I come out of Gulag.
My in-game graphic settings and config files keep resetting. I have tried putting the options.4.cod23 file in read only and it still resets? Help please! 😞
Hey you know at 23:29 if I put the wrong number in by mistake because I’m terrible with knowing anything about my pc, would it cause the game to crash and make my pc restart? Thanks
@jesus_wtss rtx 3050 ryzen 5 6600H 32gb (2x16) ddr5 4800 and ssd. So not shitty at all my friend. I actually changed the settings a bit to get better graphics and I am still getting the same fps so...
Curious why you flip flop on the “Renderer Worker Count” setting in each optimization vid. Last vid it was “cores minus 1” (which is common), before that it was “core count,” and now, again, you are recommending to input the # of cores. Any explanation on why your opinion shifts back and forth? Legitimately just curious lol
If you have an AMD GPU, use FSR 3.0 in the Upscaling/Sharpening with AMD Frame Generation turned on. It quite literally doubled my performance with the RX 6650 XT.
@@End0fst0ry that's so nice. It doesn't work on my 2060 that good as on AMD. Have a 50% FPS increase on vondel and ashika (but not constantly) and no increase on urzikstan 😢
I switched all my setting to this bc I was having issues and figured there were new setting, for the new season. These settings unfortunately made it worse for me. 50fps... not sure what to do, my game was fine when I first got on and now, I am getting 50-60fps...Hoping for some advice.
Since the new update nothing seems to work for me. My FPS is above 120 and I’m playing medium settings yet every server just seems to have aids. Like no lag until I’m caught in a gunfight and then it lags.
My fps also increases a lot with fsr3, however it is strange because I feel lag and tearing.. with fsr1 I have less fps but it feels smoother, idk why. I can't find information about it.
Head over to FPS Hub to unlock your PC's FULL POTENTIAL!
Use code "4EYES" for $15 off any order over $100:
www.fpshub.org/
Hi, thanks as always! But now they released FSR3 do you think it’s worth it??? Supposedly “Doubles” fps but what about input delay and visual quality, Have a good day.
hello, in nvidia profile inspector the settings you usually recommend have changed, they are no longer available, do you have a video now or in the future to adress that matter ??? thanks for everything you do for the community !!!
Thank you! I watched about 2 hours worth of "the best settings" videos with no luck. Found your video and have not lagged or stuttered once.
found you from reddit. after update the game was a snail. this fixed it. much respect mate!
AMF FSR 3.0 Frame Generation is amazing as of Feb 2nd 2024 on the latest AMD Drivers
For those on AMD cards, just make sure you have Anti-Lag turned on inside the Adrenalin Software, but Enable the frame gen in the game.
Whatever FPS your game is capped at in game, Frame gen will almost double that; but because we have Anti-lag turned on from before, that hit in latency from AMD FSR 3.0 Frame Gen is minimal.
Cheers everyone!
Went from avg 97fps to 133 with these settings! Awesome! Thank you
Thank you!! I’m new to PC and it helped improve my FPS from 65 to 140+
Have to comment here. My rig rocks a 5700G and a RX6700XT w/16 vb RAM. without this settings I was having 90/110 FPS and after this I’m achieving 140+ even 160. THANK YOU❤️❤️❤️❤️❤️
Bro I appreciate you I’m not gone lie I was randomly searching through settings videos and just watched your full video … and man I must say your a wizard lol my aim is 100% better thanks to you
Since you made this video cod have updated FSR to FSR 3 with the option for Frame Generation
REPLY!!! I'm also curious about this, I haven't noticed any jumps in latency. Definitely a good video. Subbing Fam
I have a very good FPS both Resurgence and Battle Royale when I am also streaming, I have never had this performance before! Cheers mate!
I usually have between 100-140fps and I did everything you said in the video. It went to 280-300fps. As I stream the game as well I wanted to get some quality back so I increased some settings and Im still getting 200-220fps and the quality is great. THE BEST VIDEO ON TH-cam ! THANK YOU SO MUCH.
Not only does frane generation introduce a ton of latency, it also introduces stutter and also just looks jittery.
a 300fps cap without frame generation looks smoother than 300+fps with frame generation
You'd think a video like this would be for those with a below average pc. Seems like this is geared for people who already get high frames to go even higher.
Would be awesome if you made a video for those struggling to get good frames
helped me out so far, been having problems for last week and so far 3 clean games on PC with improved Frame ! THX
you have "focused mode" mixed up. It's a great setting if you have multiple monitors. It's a dimming switch for the brightness of the second monitor. A setting of zero leaves the second monitor at full brightness, a setting of 100 makes the second monitor completely black. I set mine at 70, which brings my second monitor to 30% brightness which allows me to "FOCUS" on the game better. It's a really good setting to use if you have 2 monitors and play in a dimly lit room.
so if i have only 1 monitor basically it will do nothing ?
@@iamdaviddrew my understanding is that if you had single monitor, and the game playing in a window (not full screen) everything outside of the game window would be dimmed
This is old video? AMD FSR 2.1 has been replaced in this update by 3.0 version. Would like to know if this is any better, worse, same as 2.1? Probably should actually play the game before chucking a video out
New to PC, scared the life out of me going in changing settings in config. Cheers though, followed everything. Now to test !
Bro just earned a Sub went from 120 to 144 thanks my guy 💪🏽
Copied all steps exact. But the f12 button to get 120 did not work lol what did i miss?
I follow your setup every time. Best settings hands down. 👌
So after doing all this, when I first reboot the game my shaders pre loading stuck at 0%. Is there any fix for this?
It takes a long time, but no longer than 10 minutes
Was sitting around 65-110 fps @90fov
Did the mentioned changes
BUT used amd fsr3.0 and frame generation
And getting 175-200+ fps @ 120fov
Also seems my packet loss and extrapolation issues may be reduced or gone but ill need to play a couple dozen games to see
Should also mention I'm on a ryzen 5600x with a Rx 580 8gb and 64 GB ram fully overclocked.
(Upgrading soon to a 5800x3D and 7800xt)
I was sitting 110 avg at fps. I notices turning only FSR boosted my fps by 10/20 though hell broke loose when I enabled AMD Frame Generation now I am getting 250+ constant. I did not that Frame generation option does cause some images to look a bit off though I feel getting 100 fps boost is the best deal I can get.
@@karma5319same here. 90-120 but typically in the 110 range. turned it on and it got to over 300 frames and my game crashed. i have my fps capped at 165 too and it went that high. but my game was crashing on fidelity cas (which is what i normally run) as well so i think it’s just the game and the update.
@@karma5319 only real big difference i have seen in the 3 hours gaming since my original comment is grass looks absolutely horrible and trees from afar are jagged asides from that anything nearby looks fine player models look fine no weird ghosting or screen tearing.
@@titantech6328 Agreed.
@@karma5319 those extra frames are the cause of excesive latency problem. It's fake frames.
20k views and supposedly only 500 of u guys r subbed to this ch. That’s crazy numbers
See you upgraded GPU! Just wondering why you didn't wait on the 50 series? Had a 3090 ti didn't you
Love the guides Dave, absolute class and clean editing!
The games broken so how are these settings correct?
really good video quick and straight to the settings
@FourEyes Hi bro.. thank you for the video.. i have 1070ti 8gb VRAM 16gb RAM.. which VRAM SCALE should i put playing while streaming with OBS to not have any problems.. maybe 70% ? i get 100 fps only gaming and 80 fps gaming + streaming
The game on high texture settings uses 13.6 gb of vram, just saying
@@End0fst0ryno it doesn't lol max higbia lole 5000 6000 Mbs 5 6 gbs. In old gpus max the vram scale out. Because of the bandwidth memeory ect
@@End0fst0ryon 4k it may use 13gb lol 1080p and 1440p nahhhhhh
Would you recommend these settings for ranked as well? If not can you make a dedicated video for ranked play?
Thank you so much for the updated video! I watch everyone of your optimizations. I do have a question for you, I have a 4090 with a Ryzen 9 7950x3d what should I set my renderer worker count to in the config file? Also are there any settings you would adjust with my above specs? Thank you again appreciate all you do!
Hi mate. Before update I setup 8 , after update recommend 16 because if is 8 I see different input lag on my controller. I have the same build.
I’d honestly settle for being able to play with friends can’t update up weapons screen keeps flicking to fetching profile and joining game session and can’t get my loadout from the game without it freezing and sounding like an indicator
same here. so annoying!
Love the settings but when you do the whole changing stuff in note pad it crashes the game every so often
Beauty mate this helped heaps, I'm getting around 180-200 fps but it doesn't feel very smooth, it feels like maybe 100, Anyone have a fix for this?
Not sure if it's just my CPU (I7 9700k), but when I set my render worker count to exactly half of my cores (4), I get nearly 30 more fps.
Fantastically made video man, thanks!
Legend! Thank you 💪🏻💯
my PR on resurgence was 15.. first game after i used these settings got 18 kills xd #already BIG thanks!
I cant do it 😅 I prefer cranking the settings up, and using AMD Adrenalin to lock the FPS with chill and get sub 4ms latency, I like the immersion and look.
If you want to be competitive and max the FPS out with these settings for sure.
yo, thanks for your videos, im a new fan
Great video can't wait to try them out. Question for you my man... inverted commas? You mean quotation marks? haha
does removing the blood effects in the .ini files remove dismemberment effects? because i haven't had those effects since i did this.
Just a heads up on AMD Frame Gen is available on FSR3.0
I got a 4070 and I run fidelityfxcas at 70 with DLSS frame generation on and my latency is great, so I’m not sure what you mean by bad latency cause I’m not seeing that at all
Amazing video thankyou
Might have try out the optimization. Ive got a 4080 i7 12700KF and i can get 250fps but i feel like i could get it closer to 300
Crazy to me that you mentioned Path Tracing again, but AGAIN failed to mention that it only affects the main menu and shooting range... It literally does not affect your in-game performance, because it's not even on during gameplay. It's not a hard thing to clarify. Just do it. Path Tracing will probably be introduced in the next Call of Duty release; and this is simply them testing it out beforehand. A bit odd, but there you have it. It does look INCREDIBLE though.
did you record the video before the reload season came out? FSR3 is not in the settings, how can you talk about the settings if you don't know how they behave in the new season?
After making changes as per you. I start getting DirectX Error every time I start the game.
How did you know about fov affecting aim assist? Not seen anything on this, would like to find out
Probably trial and error
Resizable bar works fine if you dont use custom profiles in the nvidia control or nvidoa profile inspector. If you used custom profiles..say choose cod.exe..You will cause issies with resizable bar if you have the custom profile It disables itself even though tje config file has it set to false. If you want resizable bar on warzone...disable the custom profiles and just have nvidias set scross the boar. Issue sorted.
Are it so for the render worker count for cores? There's a debate with an AMD CPU for you to use half your cores. Have you heard about that? Community?
Bro... I was using your settings and was able to play perfectly on my HP Gaming Laptop (GTX1650, 16gb RAM, Intel Core i5), and now since a couple of day I cannot get more than 45fps on average, sometimes dropping below 30, it is unbearable... please help me fix this!!!!
Good afternoon. I am a subscriber and I come to you after every new update. Favour ... can you just run through the optimal settings without explaining them? I've heard why I should and shouldn't have certain things on or off and high or low so many times I trust you. Just low - off - very low - high ... etc
btw ur display resolution if u put that lower u get more fps dont listen to him automatic makes fps lower
wait so if i have 16 cores ND 24 THREADS AND 8 OF THOSE 16 CORES ARE PREFORMANCE CORES AND THE OTHER 8 ARE EFFICIENCY CORES DO I USE 8 OR 16 IN THAT NUMBER
you are the best thanks :)
tnk bro
have gone through all the steps. but now when I start warzone my laptop crashes. what am I doing wrong? Help!!!
You said you were going to show us a better way to downscale our resolution that wasn’t in the game menu? Edit: this actually helped so much that I can play the game in 1440p now!!!
he only helps those with high tier pc not for us who doesnt hace the cash for that i have someone who i watch and he is much better
The FSR (now version 3.0 in-game) does just that. It is rendering the game at a lower resolution, then upscaling to your monitor's display resolution using advanced techniques. It is recommended to set the preset to balanced or performance, then turn off frame generation.
@@Beardfish. idk why but I’m getting way better performance with FSR1.0
You’re great but I wish you would’ve made this video when fsr 3.0 came out
Ive always used your videos for Battlenet Call of Duty, but I have a question about Steam Call of Duty. No matter what I do I always have blocky pixelated video in game. The ONLY way I have figured out how to fix it at the beginning of each match is to switch it Extreme graphics & back to Ultra. But when & if I go into Gulag, I have to do the same thing again & then again when I come out of Gulag.
Bueller, Bueller, Bueller...
My in-game graphic settings and config files keep resetting. I have tried putting the options.4.cod23 file in read only and it still resets? Help please! 😞
Since i try setting up all this, my game always reset all my settings to default when i restart... any help?
They've added FSR 3.0 with frame generation. That's the one to use
Thank you
Is there another word for "cores" i cant seem to find "physical cores" for my GPU
If you acitivate hags on you have also to enable resiszable bar in you bios..
That's just completely false.....
thx to you
Hey you know at 23:29 if I put the wrong number in by mistake because I’m terrible with knowing anything about my pc, would it cause the game to crash and make my pc restart? Thanks
FYI I'm seeing AMD FSR 3.0 (instead of 2.1) as an Upscaling/Sharpening option with today's update!
Is there Frame Generation option?
that's because this upload is based on an old version
FSR 3.0 is good if you need more performance, just make sure you disable frame generation. Try balanced or performance presets.
@@pjetreg yes
My PC ryzen 5 3500 gpu rtx 2060 super, ill try tutorial on yt but still very lag and the build is crush when i play
Hey mate i use on lm mode in game and off in nvidia custom games and ultra in control panel is it ok?
I did everything exactly as you said on my gaming laptop and I only got about 15 fps more but the graphics now look terrible.
shitty gaming laptop😂, i got a 3060, 16gb ram, ryzen 5 5500, get about 180fps
@jesus_wtss rtx 3050 ryzen 5 6600H 32gb (2x16) ddr5 4800 and ssd. So not shitty at all my friend. I actually changed the settings a bit to get better graphics and I am still getting the same fps so...
@@ΣτεφανοςΚεχαγιας-η2ε rtx 3050 is a bit shitty tbh
thanks
You obviously know what you’re talking about. 👍
Curious why you flip flop on the “Renderer Worker Count” setting in each optimization vid. Last vid it was “cores minus 1” (which is common), before that it was “core count,” and now, again, you are recommending to input the # of cores.
Any explanation on why your opinion shifts back and forth? Legitimately just curious lol
In Warzone/MW3, I always have recommended to set to total number of Physical Cores
If you have an AMD GPU, use FSR 3.0 in the Upscaling/Sharpening with AMD Frame Generation turned on. It quite literally doubled my performance with the RX 6650 XT.
Doubled performance and latency, yeah
@@End0fst0ry that's so nice. It doesn't work on my 2060 that good as on AMD. Have a 50% FPS increase on vondel and ashika (but not constantly) and no increase on urzikstan 😢
My pc froze up on these setting what do I need to do
Respectfully man, i would have waited to post this video. Today was an atrocious day for the warzone/COD community 😔
indeed...
Literally makes no difference. This is an evergreen video for the entire season. No reason to wait.
I'd be lucky if i could load inro resurgence. Game gets stuck in a loop.
I dont have full screen exclusive
I switched all my setting to this bc I was having issues and figured there were new setting, for the new season. These settings unfortunately made it worse for me. 50fps... not sure what to do, my game was fine when I first got on and now, I am getting 50-60fps...Hoping for some advice.
CPU bound, probably
youll get better and more consistent fps using w11 23h2.
how do i put my settings in config back to original
I have gp 2070 super and i DId all step on u video but i still get 100 to 120 fps and i have 165 Hz monitor. Why is that ??
did u played on 1440p? Then its normal fps for your gpu.
No way my 4080 laptop getting more frames than your 3090.. I’m at 1600p and same settings
Had to wait for your video to come out, since your last settings video was too good.
Warzone crash
Foureyes best settings
You can play in 3rd person view in Zombies
I have a GeForce rtx 3060 gpu how do I find the core I need
its 6, put it to 5, always one lower.
How do i know if my pc is cpu bound
Its weird, on my compter I dont have some of these setings in warzone...
Is your driver up to date ?
Yes, it said I have the most recent version.
Since the new update nothing seems to work for me. My FPS is above 120 and I’m playing medium settings yet every server just seems to have aids. Like no lag until I’m caught in a gunfight and then it lags.
Please help!!! Graphics still won’t save
i dont see fullscreen exclusive can u help me someone?
bro i loved ur vids ,but this vid was recorded b4 the update u don't have what we're looking for
Do u noticed that the "eco mode preset" will always reset to efficiency everytime we start the game??never it will stay at custom
You need to change V-sync menus to off (or a setting in that list) which is what defaults it back to ECO.
there is no players in my cod file
They have added fsr 3 with frame gen i literally doubled my fps check it out four eyes !!
My fps also increases a lot with fsr3, however it is strange because I feel lag and tearing.. with fsr1 I have less fps but it feels smoother, idk why. I can't find information about it.
@lain-nz4sn because framegen increases input latency
Do NOT use framegen. Will ruin your latency
I’ve noticed much smoother game with variable rate shading OFF