DIY Bumble Bee Glitter Tumbler | Honeycomb Tumbler
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- How stinkin' pretty is this one!!???This tumbler takes patients and time but it is so worth it! Isn't she beautiful!!I walk you through step by step to create this beautiful tumbler
#epoxycraft #diyepoxy #glittertumbler
If you have questions or need help come join us in our Facebook group! It's a big community of tumbler makers all willing to help each other! / littleleeandrose
Shop our website and use the code MOREGLITTER for 10% off one order (not valid on subscriptions) iwantglitter.com
/ littleleeandrose
Grab coupon codes in our weekly SnapChat episodes on SUPERFLY DIY or LittleLee and Rose
TikTok vm.tiktok.com/...
GLITTER SUB BOX littleleeandro...
SWAG BAG SUBSCRIPTION littleleeandro...
SHOP OUR CRAFT SUPPLY ONLINE STORE! www.littleleea...
PRODUCTS USED IN THIS VIDEO
Travel Mug Blank amzn.to/3DfeHJN
Gold Glitter littleleeandro...
White Glitter littleleeandro...
Printable Vinyl littleleeandro...
Craftopia Transfer Tape amzn.to/3cqmglM
Painters Tape amzn.to/3wtr6FS
Krylon Spray Adhesive amzn.to/3R8Wbqd
Nitrile Gloves amzn.to/3pKr8Fq
Chemical Respirator amzn.to/3ceMqbn
Dust Mask amzn.to/3PLCiUX
White Primer Spray Paint amzn.to/3dVh89G
Clear Gloss Spray amzn.to/3ALWW3l
99% Alcohol amzn.to/3PIb3ed
Silicone Stir Sticks amzn.to/3PPZHEK
Tumbler Turner amzn.to/3CveYrR
Tumbler Turner amzn.to/3wsC4eQ
Craft Knife amzn.to/3ch8wdk
Brayer Roller amzn.to/3pJOnPY
Cup Cradle Laser Line Up amzn.to/3TcF6NX
Mini Scale amzn.to/3R6P0Pd
Fifo Squeeze Bottles for Epoxy amzn.to/3KkFbeD
Measuring Cups amzn.to/3KgQzbn
Felt Squeegee amzn.to/3R67Ea3
Epoxy Mixer amzn.to/3CyO02n
Silicone Mixing Cups amzn.to/3AK1xCN
Silicone Mat amzn.to/3dVbXqd
Parchment Paper amzn.to/3dWy6ED
Vinyl amzn.to/3CuDhG8
Holographic Vinyl amzn.to/3wtehv6
Opal Vinyl amzn.to/3ckVD1Q
Kitchen Torch amzn.to/3R9hqIU
Holographic Vinyl amzn.to/3dZu6na
WATERSLIDE PAPER INKJET littleleeandro...
WATERSLIDE PAPER LASER littleleeandro...
WEEDING TWEEZERS. littleleeandro...
WEEDING BALL littleleeandro...
EPOXY WARMER littleleeandro...
EPOXY SCALE littleleeandro...
*Keep in mind I am an Amazon Affiliate. This does not change pricing for you in any way but I possibly profit from your purchases through my links
IMPORTANT NOTE Epoxy resin is toxic while it is curing, and safety precautions must be taken. Wear proper protective equipment (nitrile gloves, long sleeves, full-face respirator, and apron) and work outside or in a well-ventilated area. Do not allow epoxy resin to touch your skin or be inhaled through fumes or dust. If you get some on your skin, wash it twice well with soap and water. Always read the safety information!
Every time there is an error you show us how to repair it is a bonus to the video. You spoke about safety, as you always do, thank you. I submit to those who are not as safety conscious that you may not have an allergy to epoxy now but it is exposure that causes allergies. At any sign that your body is reacting get your safety gear on and NEVER forget to use it. Also, if you have other allergies like I do to latex, you must be aware of those substances in the safety gear. I didn’t think about the sealer part of my respirator being rubber, a latex product, until I got a rash. I covered the whole inside with paper tape and now have no reactions. Once again Summer, thank you for a great tutorial.
Love, love, love your tutorials. You have saved me so much epoxy and money by doing the hang method. You are pure awesome sauce Summer. Thank you for sharing and caring😁
I absolutely love your tutorials. The videos are so clear, you explanations are so descriptive, and you are constantly offering advice and troubleshooting!!! Thank you!
I love this cup and can't wait to do it with my daughter! Thank you for your creativity! I love the things you create. You make me a better crafter
I really like this cup. My family recently recognized that I am the queen. I guess I will have to make myself one of these.
Hi , thank you for your video it’s so clear and understandable for beginners , I was wondering you you leave it turning over night till the resin is set ?
I absolutely love this cup❤
I love love this cup beautiful what color did you spray paint the cup when u prepped it
You inspired me!!! Love you videos. Thank you for being so detailed!!!!
Beautiful Cup ! I am going to try this today 😍 I love all your work and I am thankful for all your learning tools to help me do my cups better
What an awesome cup...love love it. Amazing how it turned out
Love your spin. Thank you for all you do!
I LOVE THAT BOSLEY GLITTER!!!! Other than chrome.. it’s my new FAVORITE COLOR!!
Summer I want to thank you for telling us to always wear a mask, nobody else does this and I think it’s really important. I couldn’t find the kit for this cup on your site. Just wondering if its just not there yet?
I just looked and I think it's there now
@@ladyakiraa82 It is and there is free shipping with no minimum order
So beautiful!!! Love it
Love this video!! What is the first step in painting the mug (brown)?
yes, watch the tutorial on how to prep a cup on her channel, the she spray painted it a similar color to the Bosley glitter
Love the tutorial! How many days total does a cup like this take?
I love this cup😍
Beautiful work as always 😍😍😍😍😍😍😍😍🥰🥰🥰🥰🥰
Love the cup and the tutorial. Where did you get the pink catcher for your vinyl?
I got my kit and made my own Queen Bee mug! I want to make more so I ordered mugs from Hogg. Where can I get the cut files for the deals? They need to be the same as the kit. Same 'Queen bee" same bees, honeycomb and drips. I am using my mug every morning at work!
I absolutely love this cup....ty vm blessings
I find the silhouette software so much easier to use. I started out with cricuts and I bought a silhouette and sold all my cricut stuff and never looked back.
Love this can’t wait for my order to come in, would love a circuit machine but I bought a silhouette cameo off of Facebook marketplace and unfortunately you get what you pay for... Absolutely love your videos
I have a silhouette and a cricut. I use my silhouette 100% of the time. I love my cameo
I have a silhouette and a cricut and my silhouette is used much more than the cricut!!!!...You will love it when you start using it!!!!...
Why did you not fix the part of the drips where the vinyl came together? That big spot doesn’t match the rest of the drips 😬
(Serious question)
meh, it's a drip LOL
Wait, so after applying the decals you sprayed it white then added Payton? It was kind of confusing because you didn’t mention spraying it till you came back and the cup should have already been glittered. I’m just trying to clarify because I am going to attempt this cup!
Edit to add: How many coats of glitter did you end up doing? This video was confusing. Not sure if it was just me but when it showed you applying glitter the second time it looked like the cup didn’t have any glitter at all. It didn’t look like a second coat?
Hi Emily! Summer is still learning to video edit but yes she spray painted the cup white before adding 2 layers of the Payton glitter
Megan Witsche I completely understand. She does a fantastic job with everything she does. This was the only video I was ever confused and I’m pretty sure I’ve watched every single video 😂 I just wanted to be clear on this one because I’m attempting it soon! Thanks so much 💜
you let the white paint dry before adding the adhesive spray?
I looove it! 🖤🤍🐝
Thank you for all you do
Love it, need that in my life
Very cute! Could this be done using the hang method?
Beautiful!!
Question: when you were sanding it you said after washing it you would not touch it again with bare hands but then putting the decals on you touched it quite a bit with bare hands. Did I misunderstand you?
That's exactly what she said. And then handled it without gloves for the remaining of the video! Go figure 🤷........ Says one thing, but does another
sometimes it happens, just be sure you wipe it down with alcohol or wash with dawn again before you epoxy it and it will clean the oils off that may have gotten on there with your hands, oils can repel the epoxy and cause fish eyes. At that point in the video she had already epoxied the glitter layer, so yes, non gloved hands to apply the decals you would then wash it again after spray paint and before your next coat of epoxy
@@Character_6 The ungloved hands were used after sanding. If you look at the video again, she explains not to touch it after sanding, washing and before you epoxy.... she does touch it with bare hands AFTER she epoxied the glitter layer.... she said that when she came back and added the decals.
I was questioning the same 🤔🤔
Do you sell the spinner separately from the package deal?
We sure do! You can find it here www.littleleeandrose.com/product/littlelee-and-rose-cup-turner
Yes, and the site is now free shipping with no minimum order
Can you put that foam on your drying rack on the PVC pipe?
Cheyenne Surkyn Yes, at least I can and I have 1/2 inch pvc wands on my turners. Happy New Year. 🎊
That is gorgeous!!!! How many hours went into making this?
that is going to vary according to your skill level.... when I first started it took me forever just to glitter and seal a cup for decals, now, it's easy for me...
I love love love this cup & your videos. But my question is what nail polish is that???? 💅 LBVS
What color spray paint is this?
Bosley is a champagne colored glitter so you would want to get a color similar to that color....
Stupid question, it there a bundle of kit available for this?
Did you spray paint it white before you applied the spray adhesive then glitter?
Yes she spray painted it white before adding the spray adhesive
For epoxy separation. Is there are fix, Or do you strip?
I wonder where they got that foam from , it’s nice and big
It comes with our turner! www.littleleeandrose.com/product/littlelee-and-rose-cup-turner
Love it
What color spray did you use? The kit does not come with spray paint. When I order, I want it to be similar to video
it's a spray paint similar to the color of the Bosley glitter.... Bosley is champagne/gold color
Was it really that EASY to see/pull that blue honeycomb up thru the 777, paint & Glitter????
With the 777 and paint...I would think they would be SEALED in...?
you can put hot glue dots on the pieces you want to pull up to make them easier to find
Wish you would have pointed that out in the video!! Or did you and I MISSED IT????
Whoever told you that adding a blue dye to your epoxy would counteract the yellowing lied to you. 😂
If you want to cancel out yellowing, you'd use the opposite color on the color wheel... Which would be violet/purple. The reason I know this, is because I'm a nail tech and lots of manufacturers will tint their Gels with a very slight violet hue to prevent yellowing. You're adding blue which will mean that when it starts to yellow, it's gonna look green instead... Which makes no sense. Start using PURPLE dye instead of blue if you truly want to help with yellowing.
Summer also is a hairdresser, thanks for your input
Did you epoxy the handle too? I couldn't tell.
she did epoxy the handle
Wow this is beautifical but it is way too many steps for me to ever do this.
I couldn’t find the glitter on your site. Am I missing something?
You have to click on the 3 lines next to the cart in the upper right hand corner. The lines will drop down a menu where you can click on products and find her glitter.
I just went and investigated and It sold out in about 20 minutes.THis has been the most popular kit so far. I will be making more tomorrow and they will be available again. Sorry Love!
Is it safe to drink from these cups.
LadyTaurus Queen absolutely!
yes, after the epoxy is fully cured it is no longer toxic as long as you use FDA compliant epoxy
I was VERY confused by your video, you commented in your first layer of epoxy sanding that you will NOT touch the cup again with bare hands yet in the next step you had bare hands all over the cup and in future steps as well. Then you added a layer of Payton, said you would come back after it dried, when you came back it appeared you had an entirely different cup that didn’t have any glitter on it and proceeded to put your first layer of Payton yet again
That was if she was going straight to epoxy again so it didnt fisheye. If you do touch the cup you'd need to wipe it down with either rubbing alcohol or acetone before epoxy so it doesn't fisheye
I’m lost too honestly 🤷🏼♀️
Hi Katie! Summer is still learning to video edit. The layer after sanding you don’t want to touch so there are no fish eyes yes after that layer is dry you can touch it. She did add 2 layers of White Payton glitter in the visit showed her second layer first then her first layer it was just backwards as she is still learning to video edit. Hopefully this helps you understand the tutorial better
I'm looking to buy ur turner can u use it with a mugs too.
YES!!! www.littleleeandrose.com/product/littlelee-and-rose-cup-turner
I have searched all over Amazon for the weeding ring, but it keeps showing me jewelry like I cant spell. Please let me know where you got yours, the link doesn't have one!
our website! www.littleleeandrose.com
The complementary color of yellow is a bluish purple, not blue. Orange is the complementary color of blue.
Ramo you don’t want to compliment you want to counter react. Very different.
@@wendymilleravenue7photography It's color theory :) Complementary means the colors cancel each other out which is what she's doing here. It's a really smart idea to combat the yellowing.
Do you ever sell finished products and not just kits and supplies?
Where did you get the bees?
She created the decals. She also has the entire kit that comes with all the decals in the tutorial, the mug, and 2 glitters available on her site Littleleeandrose if you’d like to recreate the whole look
And free shipping on the site with no minimum order!!!!
How can I get or what do I need to make the stickers to put on the cups.
chris hale click the arrow to the right of the title above, she has all the links posted.
Very nice but too much work!
I was hearing you say Take off the handle” and I was thinking. You can’t take off the handle. Silly me. Totally not related to cups but I was flipping they a vintage sears catalogue I found at an estate sale and saw that they sold Asbestos stick on tiles back in the 70’s. This is why any home bought prior to 1978, you have yo be so careful and just know if you do buy prior to ‘78 you sign an addendum stating you are aware of the hazards.
Well ok then....
Umm... not sure why you are coming here with your realty info. We are learning about cups; not houses 🙄