10:10 hint when doing things like this, screw the holder to the wall, put the latch in the holder, put glue on the latches, push the ladders onto the latches They are now 'perfectly' placed.
Fit the ladders the other way around... you have a flat, not angled surface or, if they are like my ladders, on the back of the aluminum rungs there is a vertical section, may have to space off the bracket with a couple of washers the thicness of the fibreglass.
For mounting the ladders using those mounts, fit the cleat to the ladder first. Connect the receiving part to the cleat, offer Chris to the door and screw. Normally Chris' are fitted to doors with a top hook or ledge, bungee across the bottom and two stops if your being posh.
I did a similar thing for mounting stuff to my steps, but I used some steel all round band screwed to the top step...:) Works great, hangs drills, tape measures etc Ive got their battery mounts, As Tony the Tiger says, they're great!!
I loved the whole feel of this one Nick, the "trial and error channel" and especially the honest reaction at 10:40, which I actually laughed out loud at, re-wound and laughed at again. Keep doing you 👍
congratulations on 100K been here from the very start and happy to see you doing so well, work in stafford but still never seen you around, hopefully will have the chance soon enough to say Hi and have a look inside the Van ! serious van envy going on with yours ! just ordered the bosch stealth kits , for batteries and tools , look decent bits of kit and will help keep things neat and tidy in the workshop.
For the drums mount them in a case with a hole in the front to pull the cable out and a bar across the middle, then you can chop and change cables and what not and the cable stays relatively clean
Move your van vaults to either side of the van then you can mount your drawer runners to the sides of the van vaults and have your new drawer in the middle
The back of my Transit custom looks like I've rolled it. Sometimes i tidy & re position everything & check on stock, but after a week or 2 its back to square 1. I did make a false floor & slide my steps in underneath which is a god send, it saves so much space.
Nick as a MOT tester we are now having to have EV safety equipment in the workshop like a "pull the frying mechanic pole" and fire extinguisher with a 90' up funnel for shoving under vehicles and I saw those yellow gloves and I thought if we get an electric electricians van in they would be ideal for testing wearing them...well with winter coming at least a defrost on the window of an Artisvan would not burn so much ! xx
God bless you Nick if you turned the ladder around the other way and fitted them on the black bit at the top right to the edge with a fixing it to the leg behind it 👊👊👊
@NBundyElectrical You was at a tool convention a while back and I think on the velocity stand you presented a sleeving dispenser. Did this ever come out? Thanks
If you can give some feedback for those rubber gloves you'll want to have them possibly make the inside red so you can see if there is any damage to them.
if the mounting parts on ladder were glued or screwed where the aluminium bar is, would work much better, now that it's sticking out on your ladder sides, will defo bother you on site
Ngl the merc high top will be too much with the length of it parking it out getting in and out of properties will be a ball ache not to mention as a spark there’s no need for that big of van
All of that Milwaukee gear should be mine surely, I am after all you're best subscriber even though I play with pipes not Eddie volts, surely it's gonna be me! 😂
unilite.co.uk/product/il-925r/?dynamo=bundy&ref=1345
£50 il925r
10:10 hint when doing things like this, screw the holder to the wall, put the latch in the holder, put glue on the latches, push the ladders onto the latches
They are now 'perfectly' placed.
Fit the ladders the other way around... you have a flat, not angled surface or, if they are like my ladders, on the back of the aluminum rungs there is a vertical section, may have to space off the bracket with a couple of washers the thicness of the fibreglass.
Came here to say this
Did you try turning the ladder round? So the front is facing towards the back. The front edge looks flat so better for those mounting clips.
For mounting the ladders using those mounts, fit the cleat to the ladder first. Connect the receiving part to the cleat, offer Chris to the door and screw.
Normally Chris' are fitted to doors with a top hook or ledge, bungee across the bottom and two stops if your being posh.
I did a similar thing for mounting stuff to my steps, but I used some steel all round band screwed to the top step...:)
Works great, hangs drills, tape measures etc
Ive got their battery mounts, As Tony the Tiger says, they're great!!
I loved the whole feel of this one Nick, the "trial and error channel" and especially the honest reaction at 10:40, which I actually laughed out loud at, re-wound and laughed at again. Keep doing you 👍
congratulations on 100K been here from the very start and happy to see you doing so well, work in stafford but still never seen you around, hopefully will have the chance soon enough to say Hi and have a look inside the Van ! serious van envy going on with yours ! just ordered the bosch stealth kits , for batteries and tools , look decent bits of kit and will help keep things neat and tidy in the workshop.
cheers nick , just ordered , ... free tape measure also.. nice deal.. thanks again....
Nick turn the ladders around , fix the plates to the top of the steps, it should then slide on to the plates on the door
For the drums mount them in a case with a hole in the front to pull the cable out and a bar across the middle, then you can chop and change cables and what not and the cable stays relatively clean
Wowww i absolutely love the tape measure clip. Best thing I've seen in a while 😊 so easy to use
Move your van vaults to either side of the van then you can mount your drawer runners to the sides of the van vaults and have your new drawer in the middle
Always love your videos. Keep up the great work👍
The back of my Transit custom looks like I've rolled it. Sometimes i tidy & re position everything & check on stock, but after a week or 2 its back to square 1.
I did make a false floor & slide my steps in underneath which is a god send, it saves so much space.
How it should be. If you can't find anything, nor can a thief.
Nick as a MOT tester we are now having to have EV safety equipment in the workshop like a "pull the frying mechanic pole" and fire extinguisher with a 90' up funnel for shoving under vehicles and I saw those yellow gloves and I thought if we get an electric electricians van in they would be ideal for testing wearing them...well with winter coming at least a defrost on the window of an Artisvan would not burn so much ! xx
10:43 that face when u do something ur mum told u not to do and goes wrong like she said it would
Handy little additions to the van to keep everything in its place, thanks for sharing
Why didnt you flip Chris round and put the mounts on the flat part of the step ?
God bless you Nick if you turned the ladder around the other way and fitted them on the black bit at the top right to the edge with a fixing it to the leg behind it 👊👊👊
Good storage = more time for you.
More time for you = more time to make money.
So good long term value.
Some self-adhesive thick draft-excluder foam on the bottom of the ladder legs will stop it rattling!
Tip…
Self-tappers:-
Use some thread locker on them & they don’t come loose.
Just a heads up with the gloves, your suppose to wear the leather ones over the top of the rubber ones! Keep smashing the content mate.
Yeah, don't handle a live cable with only the outer leather gloves on. Could be a shocking experience!
😂😂
What lights did you use in your van mate
2:38 and a partridge in a pear tree?
Congrats on 100k 🎉
Congrats on 100k mate. Top content!
Edit: Just bought an IL-925R with your code. Thanks 🙌
Love organised. My shed is full of holders for everything
Put the mounts on the front of step where it's flat.
@NBundyElectrical
You was at a tool convention a while back and I think on the velocity stand you presented a sleeving dispenser. Did this ever come out? Thanks
Got to love the big rubbers🤣
A steady cam would be good… right now I'm feeling seasick. 😀
If you can give some feedback for those rubber gloves you'll want to have them possibly make the inside red so you can see if there is any damage to them.
if the mounting parts on ladder were glued or screwed where the aluminium bar is, would work much better, now that it's sticking out on your ladder sides, will defo bother you on site
Congrats on making it to 100k
Mate great to see all the giveaway stuf But i am really waighting for the unitlite tape messure giveerway from weeeeks ago come on nic... please..
Anyone any idea when the milwaukee earpods will be available in UK plz
great Teacher Nick , we can learn from you , like the stealth mounts a great Idea , and I have just Ordered IL925R UNILITE Thanks ⚡️👊
Give away pile adding up nicely can’t wait for the give away video fingers crossed
Have you a link for the mounts youve fitted to your bag??
I have to use those gloves when i work on hybrid/electic cars, nightmare trying to undo the 10mm bolts with em.
Straight in with a sponsor plug
You love mucking around in the unit, so would I if I had one. A bit jealous
Gloves gotta grab a fly zapper 🤣🤣
Beard on point by the way Bundy.
Always come in handy for doing the washing up..😆
Great video dude, nice looking mounts 😎
Abrupt ending mate caught me off guard
I don't think they are the correct length for live work ? I could be wrong and I'm sure someone will correct me 😂
Less than a minute in and already thinking yellow might be the worst colour for those gloves.
Congrats on the 100k Nick!
(Unless TH-cam rounded up!)
Congratulations on 100k
Always good interesting videos.
Got question : did you try M18™ FORCE LOGIC™ HYDRAULIC KNOCKOUT PUNCH ?
I think is great
Can we have review please
Aren’t marigolds VDE rated? Lol
Just watching top gear on BBC3 and Nick pops up in the audience.
Oy Nick! Did you take a dig at Cody’s solar life? 😂😂😂.
In the U.S we all touch live cables all day everyday
Kinda stupid but we do
your little 110V is nothing little guy
We got plenty of other voltages that we deal with. But you know best, just ask you.
Just get 2 strops and put your ladders on the inside of the roof
the front of the steps is flat
If you think class 0 are sweaty, should try class 2 rubber gloves, by heck some heat gets trapped in them😂😂
Love the way he says Milwocky
I hope you have good locks😂
Just need a Homer Simpson mask & you’re set 😂
Your gonna have so much fun pulling Chris off 😜
Playtime in the bat cave (unit) 😂😂😂
Why not use the other side of the steps, looks flat from here.
The unit looks a mess so the van can be tidy lol
There are much better solutions for hanging a ladder on plywood that don’t require fixing anything to the ladder, like two large hooks.
click on the link in the pinned comment and don't put the bundy25 coupon code in
If you click the link in the pinned comment its £50 and you get a "free" tape measure and free shipping.
@@starburst2203 It's working now, but it wasn't when the video was first uploaded, with or without a code.
@@MichaelS133 It's working now, but it wasn't when the video was first uploaded, with or without a code.
Nick, bite the bullet, buy a Mercedes high top van, team up with Facom and get your van kitted out professionally!
Ngl the merc high top will be too much with the length of it parking it out getting in and out of properties will be a ball ache not to mention as a spark there’s no need for that big of van
All of that Milwaukee gear should be mine surely, I am after all you're best subscriber even though I play with pipes not Eddie volts, surely it's gonna be me! 😂
Bag pipes? …👍🏻
Yeah if you say so
Anyone else disturbed by the way Nick pronounces Milwaukee???
Adams mum….👌👍🏻
Just get Adam to do it 😂
Nice Marigolds 😂
So the bucks full of Brits & Prices is no more
What a waste of time 🤷🤷🤷🤷🤷
Stopped watching artisan for the reason you said. Only so many boring solar panel installs you can watch. Keep it up bundy u ledge
Waste
are you stoned or something? lol
when are we going to meat Adam's mum
How do I apply for giveaway