Another idea for high current root pass ! 6 inch TIG welding stainless steel pipe
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- You can get more accurate answers by contacting the manufacturer for information on welding machines and peripherals.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
Today is about 6 inch stainless steel pipe TIG welding.
This is the content of the "ROOT PASS" process during the welding process.
When welding pipes on a turntable, high current is sometimes used for fast welding work.
When using a high current, there is a mistake that the hole bursts.
In such a case, another idea to avoid mistakes is included in the video.
Also included in the video are some tips and tricks that can be applied during the pipe fit-up process.
Thanks for watching and have a nice week.
#welding
#turntable
#positioner
#Rotator
#Rotary
#factory
#machine
#TIG
#Root
#pipe
#hack #tips #secret #tricks
#steel
#metal
#crafts
#DIY
#ideas
#HAGOJIBI
#video
The quality of your arc shots as well as your welding skills are both excellent.
Zu
안녕하세요, you are so skill full in welding...im not so good in Korean language...but im here now at gyeonggi-do, Gimpo-si. working here as a welder..im a filipino, thanks for your video..i have learn a lot..hope to meet you someday and learn more about weldings..😊😊..
Love you brother I am welder from India.....
180 ампер на корневой шов это по нашему👍🏻
super comme d'habitude.
Merci
Спасибо очень полезное видео я из России, только начал учится тиг сварке
Melting through the tape? Brilliant idea.
Muchas gracias por tus videos son de mucha ayuda.
설명해주시는 영상과 말 흐름이 듣기 좋아여
Good job 🎉🎉🎉
I love it. Very nice Tig welding. Got the G6 sertificate, and it is hard when you dont know how to position yourself correctly and have the right setup for your welding machine. Kudos, enjoyed every min watching this.
Watching you weld is like hearing a master violinist play a Stradivarius. It just doesn't get any better. Hagojibi, thanks again for another flawless performance! Salute!
Welding alittle past 12 o’clock downhanding as you say….is allowed only if the WPS allows it and you are qualified to do so…….
Much easier to weld with the torch around 1 o’clock little higher and roll towards you
Wonderful👏👌🥇👍
180 amps I hot, great video, can't wait to see the 5g.....
Thank you for sharing your knowledge.
Desde Argentina saludos
Gracias por sus endeñanzas
❤Thank you very much I started learning today at school to teach welding
턴테이블 좋아보이네요
네 잘만들었네요. 용접 전용이라 그런지 좀 편리합니다 ㅎㅎ
Самые информативные видео что я видел по сварке TIG!!!
Exelent skills
잘하네요!
완전히 대박 👍 🔥 😍
Very great videos, your techniques and instructions are greatly appreciated. Been a welder for years but great refresh videos for veterans and beginners alike.
목소리 완전 좋아
Saludos desde Perú 🇵🇪🇵🇪🇵🇪
Thank you so much for sharing this vedio I want to learn how to Tig full support for your vedio
Мастер -= С уважением .
Thank you and algos from canada
뭔가 용접 할때 젤리같이 녹는건 뭔가요?? ㅋㅋㅋ 신기하네욤
hello, good day, viewers from phillipines here. im a TIG welder and im still in the process of learning,can i have a request?i just want to see how you feed you're filler wire when doing root pass and capping?on you're next upload plsss🙏🙏🙏
Cảm ơn a đã đưa tiếng Việt Nam xem videos dễ hơn. Mong có nhiều videos có phụ đề Tiếng Việt nữa ạ
Спасибо , большое.
Sim mestre observei que trabalhando com a tocha a favor a gravidade na descendente com a amperagem um pouco mais alta com o controle da tocha no material de adição também fica uma boa raíz obrigado professor quero ver mais vídeos é perfeita sua imagem 🙏
Thank you
super!!!
brilliant
Поворотную трубу варить не сложно, покажи как варить не поворотный стык! А так отлично заварил! 👍
좋아요
Good
49
9
Super !!!
I would love to see filler rod hand video of this weld too.
Thank you for Thai words
Alhamdulillah good job 👍
오늘도좋은 가르침 감사합니다^^~
you are the one
Brilliant thanks very well explained thanks for sharing that keep them coming
Excelente tutorial maestro, como siempre buenos consejos y mejores demostraciones, un trabajo impecable, gracias por compartir tanta información y conocimientos, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 👌🤓
Thanks, bro 👍🏻✌
Superb video as usual, love it! 👌👍
Show!!!
Hai
I've just subscribed, thank you for your videos! And I have a question after watching a lot of them.
When welding relatively short stainless steel pipes on the turntable or a table it is easy to purge them with argon from inside
because of its small inner volume. But how to protect beads when welding together pipelines that are meters and dozens of meters long?
Gap purge
На длинных трубах делают внутри пробки с бумаги клеят лентой липкой потом продается всё при опресовке трубы
用海绵和铁链制造气腔，焊接完成丝把海绵用铁丝拉出来
Buy a double purge bag so you can just purge the butt area
Purge Paper
Super 👍 👍👍 👍 👍👍 👍 💯💯💯 😻 😻😻 😻 😻😻
Give it to me in English thank you
Gran video! Que producto utiliza para tapar la union y purgar gas?
Thnx!👍🏻🇷🇺
전류는 몇으로 하시나요?
Is that suran wrap? How do you clean that off the pipe?
soldadura de calidad.
Acabas de ganarte un suscriptor mas
What camera use for video and # of dark glass thank you for your good response
Are you feeding wire or using lay wire technique?
The lay wire technique was used in this video
현직용접사구 기능올림픽출신입니다 sus파이프 스케줄얇은거 용접하고있는데 반키홀용접으로 항상 용접하는데 마지막 이음부분에서 src결함(빽빨림)이 자주 생기는데 어떤방식으로 이어줘야 그런현상이 덜할까요? 주로나오는 결함인데 해결이 잘안되어서 질문드려요
Reasons for non-penetration of welding in sewage pipes with a thickness of 2 mm from the inside
하지용접은 제일 쉬운방법 이죠.
Is it ok to weld Over the paper tape?
It depends on the situation, but if it is acid-treated after welding, it is not a problem.
유모한강사입니다.정말좋아요👍👍👍
Por favor subtítulos en español. Somos más los subcriptores en español
Intente presionar el botón CC en la parte superior derecha o inferior derecha de la pantalla. Los subtítulos traducidos están disponibles.
почему никогда не показывают литраж на горелке и в трубе-поддув
Отчего же. Практически на всех видео и расходы газа, и ампераж, и диаметры электрода
с присадочным прутком указываются
What kind of tape is that
Amazing
Effient work & talk. I feel like i watch a demo video
Пятеро внуков -= и не хотят учится . А как на выставку -= дед - завари .
👍👍👍👍👍👍👍👍
👏👏👊👊👊👍💯💪
P.L🥰🐻
Whoops forgot the tape. LOL
كيف تجعل الاختراق اقوى
вот интересно
Down hill and up hill weld ,why?
Ameryki nie odkryłeś
so... we can actually just weld right through the tape like that? And here i was peeling that shit off... this is why i watch professionals.
11~12시 방향에서 용접하는거 저만의 노하우 였는데 이미 알고 있으셨군요
하고지비님께 고마움을 전하는 프랑스분이 있어 소개합니다
th-cam.com/video/erfZD03sOn4/w-d-xo.html
프랑스에 계시는 전라도분 이네요 ㅎㅎ 너무 너무 고맙습니다 사랑합니다
Ah itu mudah boss.... Kecil😼😼😼itu mah
빽내는것 보여주세요
С кандуктором каждый может.
Imagine getting a wps up to 180A and downhill
I'm TIG welder. This method is not right. When you are welding , you should ready to work in all positions and the pipe should be fix.
Work 6.9 and12 o'clock and 6,3 and 12 o'clock.
It's OK.
기술팔아먹냐? 외국놈들한테
목소리 좀 평범하게 부탁드려요.
스타일임
하고자비님 목소리가 어때서요 ? 백날들어도 조은데요
어디 시골 5일장 약장사도 아니고 집중안됨.ㅋㅋ
You are the Maestro, thanks you for sharing your knowledge 🙏
형님, 텅스텐봉이 용접봉 쇳물과 닿으면서 비드가 그려지는 원리인가요?
어떤 원리인가요 ㅠㅠ
텅스텐이 닿는게 아니고 영상처럼 보이는 불(아크)로 좌우 밀대로 밀듯이 위빙하는겁니다
처음 불을 켜고 용가재랑 모재로 용융풀을 만들면 용접물이 빙글빙글 돌면서 생기는데 그걸 계속 모재 사이로 밀면서 모재랑 용가재를 녹이면서 가는거예요
초고수님들 많이 계시는데 답글이 없어서 달아봅니다
도움되시면 좋겠어요
ㅋㅋㅋ 국내보다.외국인댓글이.더많은영상 ㅋㅋㅋ
45도 시험보는것좀 보여주세요ㅜ
good explaining. respect