Bought mine in 1979. I love it and always will. What a fun gun at the range. I paid $350.00 new. I still love seeing them at shows. They are rare. If you like wheel guns, they are just super.
Oh yes, they are incredible revolvers. I have 2 revolver sets of the .357 mag. Back in 79 that was a chunk of money. That's why a lot of people didn't buy the pistol pak, but they bought the single barrel version. Looking at the inflation calendar. The price of pistols really haven't changed much. That 350.00 in 1979 is equivalent to 1253.00 today. They are well worth the money. Thanks for the comment.
Great detailed video Gary. I’m buying the same pistol kit tomorrow morning (5/13/24) from a friend. Here in bull shoals ark. Learned so much from this video. Take care. Ed ….
Damn good video, Mr. Gary. Thank you for doing it. I learned quite a bit. My dad owned one of these long ago, but it was stolen by a literal crackhead and never recovered by the police. I hope to acquire one of these sets in the near future. Thanks again.
I bought a similar pistol pack in 1983. My father was in the US Secret Service, and one of his co-workers bought it new and carried it as his duty weapon. I was able to buy it used with a slight discount. I have the kit to this day, and even 40 years and thousands of rounds it still looks as good as the day I bought it. It is an amazingly accurate gun. Mine kit is the HV model, with the heavy ventilated barrel shrouds. However, over the years I have added 4” and 6” standard ventilated shrouds plus several more grips. Between 6 barrel options, 4 grip options and 7 sight blades, I have a lot of options for this gun. I even was able to set up a front fiber optic and a front tritium sight for it.
That sounds awesome. I have collected a lot of Dan Wesson items. Like the sights and grips and belt buckles, and various calibers. I like the heavy barrel version too. They are one if the best revolvers made out there. Thanks for the comment.
@@knightingalesaid if you ever want to do a “cheap” tritium front sight, what I did was get a fiber optic sight from EWKArms. I measured the plastic fiber optic tube, and then found a tritium tube on the internet that was the same size. The tritium tube literally slid right into place. I glued it down with a tiny drop of blue locktight. It has been through a few hundred rounds no problem. Its not a Trijicon by any means but it glows in the dark enough to see the front sight.
Ive owned that gun since the 70's snd have shot thousands of rounds through it. It is a competotion shooting pistol. We just used for everything, hunting, etc. CZUSA still carry some parts (barrels, shrouds, etc) at a perky price. the front latch makes it the most accurate.
This was one of the first guns I ever bought new. Back in 1979 I think. Nice guns you had to head space them when you changed barrels. I dont remember them being very accurate. They were very pretty.
(shameless bragging). I own a 1980 "Target" 8" barrel python, a 1982 Stainless python, and a 1964 nickel python. They are works of art and VERY accurate, I have a 715 (stainless Dan Wesson .357) with the 8' barrel it does outshoot the pythons. -- BUT, the short hammer through on the D/W doesn't allow me to LIGHTEN the trigger as light as a Python. CLOSE, but, not quite.
I bought my 15-2V in 1978 with a 6" barrel. Paid $225 for it new. Over time I acquired the other 3 barrels, along with other grips. Still in mint condition, and love it.
That's awesome. They were pricey. 225 today would he 900.00 on the inflation calendar. I have 2 revolver paks with the assorted barrels and one 15" barrel. And several DWs. They are some of the best revolvers ever made. Take care.
I saw CZ had some more Dan Wesson barrel assemblies in stock today, ordered a 2.5” 44 barrel and a 8” 357 barrel on the spot. I’m still looking for 2.5” 357 and 4 inch 357 barrels.
@@knightingalesaid I run across a few but they definitely want top dollar. I consider my self really lucky I found my Dan Wesson 44 made in about 1989, with 4”,6”,and 8” barrels in perfect condition only 2 rounds fired out of it ever for $1000 locally
Yes you can. There are several alterations you can do. If you go to the “Dan Wesson Forum “ you find everything there is to know about the DW. All the different models. How to tell when yours was made. Custom barrels you can put on it etc. Thanks for the comment!
I have this pistol pack. About 50 rounds through it. Almost flawless condition. 15-2VH Heavy Barrel version. Missing the belt buckle, patch and gap gauge. Serial Number 272,xxx. I think 1979-1980. Considering selling it
Thank you Gary for the great video, I’m about to purchase the exact same kit here in Cali, I’ve heard that Dan Wesson, how can I know that the kit that I’m purchasing is the one that was made in Monson MA? And the reason is that I’ve heard that after they moved the production from Monson, DW started to having QC problems whit there revolvers.
The case should have a sticker on it telling you where its from. The revolver frame will have Monson on it too. There is a web site that is invaluable for DW fans. They can answer any question and help you find parts/barrels/ frames, sight, the year your revolver was made and many other things. etc., etc.. Its called the Dan Wesson Forum. danwessonforum.com Enjoy your new purchase!!!
I just bought the full Dan Wesson Kit, unfortunately I did not no they made the the gun in a vented barrel shroud. Still happy with standard barrel smooth shroud.
Great video! I have the same 1976 pistol pack. Love it! It has very little ware & about 8 total boxes of 1/2 38 Sp & 357 mag shells shot with it. It was willed to me from my deceased brother in Alaska. I will never sell it! But If anyone knows what it's value is for insurance reasons I would like some estimates from from anyone who knows please...
That is awesome. They can sell from 1,300-1,700 or more, especially if they have the case with it. You can check with Gunbroker.com or Guns America www.gunsamerica.com/#
Same situation honestly. Unfortunately I don't have the tool to properly remove & clean the barrel & idk the name of the tool. Any advice on where I can find one and order it?
@@Pops1129 you'll also want to use a feeler gauge to set the cylinder gap at .006 inch . If your barrel hasn't been taken off in a while you should oil the threads first
Thanks for the comment. In the IHMSA at 200 yd. Shooting. The T/C single shot pistols were good too. There were some other revolvers that were accurate too. The problem was to knock down the heavy steel rams at 200 yds. Dan Wesson created the .357 Super mag, also know as the 357 maximum and the .445 and .375 SuperMag. You needed that extra power to knock down those heavy rams. These more powerful calibers became a favorite in competition. The Ruger and some other revolvers were taking white tail deer at 200 yds. Hickock45 on Y/T can hit a 80 yd. target with a snub nose pistol. A lot is in the shooter. They are fun to shoot. Take care. th-cam.com/video/a6xme4axGM8/w-d-xo.html
The only thing i don't like about it is the placement of the cylinder release but it's a cool revolver pack with all the barrels and grips and that's a really sweet set up
I had this Pistol Pack for a couple of decades. Most accurate revolver, in single action, I ever owned. It was also had the worst double action of any revolver I ever owned.
@@knightingalesaid I wish I had it today, and would only use it for it's incredible accuracy in single action. But at the time my S&W, Colt, and Ruger revolvers had better DA, in that order. Now I only have pistols (semi auto) but look back on the .357 as an excellent cartridge.
Bought mine in 1979. I love it and always will. What a fun gun at the range. I paid $350.00 new.
I still love seeing them at shows. They are rare. If you like wheel guns, they are just super.
Oh yes, they are incredible revolvers. I have 2 revolver sets of the .357 mag. Back in 79 that was a chunk of money. That's why a lot of people didn't buy the pistol pak, but they bought the single barrel version. Looking at the inflation calendar. The price of pistols really haven't changed much. That 350.00 in 1979 is equivalent to 1253.00 today. They are well worth the money. Thanks for the comment.
This is by far the BEST video I've found for this model.
Thanks for the comment !
@@knightingalesaid Np. It was well-earned. :)
Absolutely - I've gone through a few videos - but this is gold as far as great info!
Great detailed video Gary. I’m buying the same pistol kit tomorrow morning (5/13/24) from a friend. Here in bull shoals ark. Learned so much from this video. Take care. Ed ….
Congratulations!! They are awesome! You might want to join the “Dan Wesson Forum.” You can find a ton of information about all Dan Wessons.
I have a Dan Wesson .357 with a 6in. Barrel. Nickel plated with rubber grips. Made around 1983. I love it!
If its a nickle plated one, its is very rare. I would love to see s picture of it.
Damn good video, Mr. Gary. Thank you for doing it. I learned quite a bit. My dad owned one of these long ago, but it was stolen by a literal crackhead and never recovered by the police. I hope to acquire one of these sets in the near future. Thanks again.
Thanks for your comment! I hope you find one.
I bought a similar pistol pack in 1983. My father was in the US Secret Service, and one of his co-workers bought it new and carried it as his duty weapon. I was able to buy it used with a slight discount. I have the kit to this day, and even 40 years and thousands of rounds it still looks as good as the day I bought it. It is an amazingly accurate gun. Mine kit is the HV model, with the heavy ventilated barrel shrouds. However, over the years I have added 4” and 6” standard ventilated shrouds plus several more grips. Between 6 barrel options, 4 grip options and 7 sight blades, I have a lot of options for this gun. I even was able to set up a front fiber optic and a front tritium sight for it.
That sounds awesome. I have collected a lot of Dan Wesson items. Like the sights and grips and belt buckles, and various calibers. I like the heavy barrel version too. They are one if the best revolvers made out there. Thanks for the comment.
@@knightingalesaid if you ever want to do a “cheap” tritium front sight, what I did was get a fiber optic sight from EWKArms. I measured the plastic fiber optic tube, and then found a tritium tube on the internet that was the same size. The tritium tube literally slid right into place. I glued it down with a tiny drop of blue locktight. It has been through a few hundred rounds no problem. Its not a Trijicon by any means but it glows in the dark enough to see the front sight.
@@ericsteel173 Thanks for that information. I would like one. EWK is awesome. I had him thread a barrel and re-crown my .445 SM.
Did he work with the president ?
@@captainscentsible1811 yes, 7 of them. Kennedy to George HW Bush.
Great presentation! I recently purchased a pistol set, and your presentation was helpful in many ways!
Thanks for the comment!! Congratulations on your new revolver set. You will really love the versatility of these Dan Wesson.
Nice colour that blue shes stunning
I had the 6inch Beautiful Gun
They are beautiful revolvers. Thanks for the comment.
Ive owned that gun since the 70's snd have shot thousands of rounds through it. It is a competotion shooting pistol.
We just used for everything, hunting, etc.
CZUSA still carry some parts (barrels, shrouds, etc) at a perky price.
the front latch makes it the most accurate.
I agree a 100%. Dan Wesson was trying to make the best revolver out there. I think he did. Thanks for the comment!
Superb truly superb
Thanks for the comment. Have a great day!
The cylinder gap can be safely reduced to.004” as long as you keep it clean.
This was one of the first guns I ever bought new. Back in 1979 I think. Nice guns you had to head space them when you changed barrels. I dont remember them being very accurate. They were very pretty.
Oh, they are super accurate. They are legendary as a revolver in the shooting world of competition.
I own one of these and it’s very accurate.
(shameless bragging). I own a 1980 "Target" 8" barrel python, a 1982 Stainless python, and a 1964 nickel python. They are works of art and VERY accurate, I have a 715 (stainless Dan Wesson .357) with the 8' barrel it does outshoot the pythons. -- BUT, the short hammer through on the D/W doesn't allow me to LIGHTEN the trigger as light as a Python. CLOSE, but, not quite.
I bought my 15-2V in 1978 with a 6" barrel. Paid $225 for it new. Over time I acquired the other 3 barrels, along with other grips. Still in mint condition, and love it.
That's awesome. They were pricey. 225 today would he 900.00 on the inflation calendar. I have 2 revolver paks with the assorted barrels and one 15" barrel. And several DWs. They are some of the best revolvers ever made. Take care.
@@knightingalesaid, Those longer barrels bring a good buck now! I remember when they marketed the 10, 12, and 15 inchers.
I saw CZ had some more Dan Wesson barrel assemblies in stock today, ordered a 2.5” 44 barrel and a 8” 357 barrel on the spot. I’m still looking for 2.5” 357 and 4 inch 357 barrels.
Sometimes you can find them on Guns America or Gunbroker.com
@@knightingalesaid I run across a few but they definitely want top dollar. I consider my self really lucky I found my Dan Wesson 44 made in about 1989, with 4”,6”,and 8” barrels in perfect condition only 2 rounds fired out of it ever for $1000 locally
Do you know if you can add a picatinny rail to these? I have the stainless version. Great video!
Yes you can. There are several alterations you can do. If you go to the “Dan Wesson Forum “ you find everything there is to know about the DW. All the different models. How to tell when yours was made. Custom barrels you can put on it etc. Thanks for the comment!
I have this pistol pack. About 50 rounds through it. Almost flawless condition. 15-2VH Heavy Barrel version. Missing the belt buckle, patch and gap gauge. Serial Number 272,xxx. I think 1979-1980. Considering selling it
Guns America is a good place to sell it or Gunbroker.com. They can go from 1200.00 up. I have 2 complete sets of them.
Thank you Gary for the great video, I’m about to purchase the exact same kit here in Cali, I’ve heard that Dan Wesson, how can I know that the kit that I’m purchasing is the one that was made in Monson MA?
And the reason is that I’ve heard that after they moved the production from Monson, DW started to having QC problems whit there revolvers.
The case should have a sticker on it telling you where its from. The revolver frame will have Monson on it too. There is a web site that is invaluable for DW fans. They can answer any question and help you find parts/barrels/ frames, sight, the year your revolver was made and many other things. etc., etc.. Its called the Dan Wesson Forum. danwessonforum.com Enjoy your new purchase!!!
I just bought the full Dan Wesson Kit, unfortunately I did not no they made the the gun in a vented barrel shroud. Still happy with standard barrel smooth shroud.
Congratulations!!! Yes they have the vented and heavy barrel kits. And stainless steel one too. Enjoy!!
Great video! I have the same 1976 pistol pack. Love it! It has very little ware & about 8 total boxes of 1/2 38 Sp & 357 mag shells shot with it. It was willed to me from my deceased brother in Alaska. I will never sell it! But If anyone knows what it's value is for insurance reasons I would like some estimates from from anyone who knows please...
That is awesome. They can sell from 1,300-1,700 or more, especially if they have the case with it. You can check with Gunbroker.com or Guns America www.gunsamerica.com/#
Same situation honestly. Unfortunately I don't have the tool to properly remove & clean the barrel & idk the name of the tool. Any advice on where I can find one and order it?
@@Pops1129 EWK arms barrel nut wrench
@@keithhartman9946 much appreciated sir
@@Pops1129 you'll also want to use a feeler gauge to set the cylinder gap at .006 inch . If your barrel hasn't been taken off in a while you should oil the threads first
If I remember right ruger Blackhawks and Dan Wesson held all the records for long distance target shooting at one time
Thanks for the comment. In the IHMSA at 200 yd. Shooting. The T/C single shot pistols were good too. There were some other revolvers that were accurate too. The problem was to knock down the heavy steel rams at 200 yds. Dan Wesson created the .357 Super mag, also know as the 357 maximum and the .445 and .375 SuperMag. You needed that extra power to knock down those heavy rams. These more powerful calibers became a favorite in competition. The Ruger and some other revolvers were taking white tail deer at 200 yds. Hickock45 on Y/T can hit a 80 yd. target with a snub nose pistol. A lot is in the shooter. They are fun to shoot. Take care.
th-cam.com/video/a6xme4axGM8/w-d-xo.html
The only thing i don't like about it is the placement of the cylinder release but it's a cool revolver pack with all the barrels and grips and that's a really sweet set up
Thanks, the cylinder release position is suppose to make the frame stronger.
Wish I still had mine...
I wish you did too. You can still find them sometimes on Gun Broker.com. They are pricey.
Hello. Where can I get a Dan Wesson with this amount of accessories?
Try Guns America, or Gun Broker.com. It may cost you 1300.00 or more. Probably more.
@knightingalesaid Alright. Thank you.
Please do a video with the combat grip and 2.5" barrel.
Sehr gutes Video! 👍👍🇨🇭
I just saw one of these at a local gun shop for 1,500. Beautiful deep blue applied to these revolvers.
They are a little pricey. DW pistols are known for their beautiful bluing and grips. That was standard on their pistols.
It was tempting but out of my budget. I picked up a cobra derringer instead. It was my birthday gift to myself. 50 now.....hard to believe.
That's awesome!
Also has been in some movies.most notable last action hero.used by the villain
❤❤❤🥰🥰🥰
I had this Pistol Pack for a couple of decades. Most accurate revolver, in single action, I ever owned. It was also had the worst double action of any revolver I ever owned.
Mine have good double actions. Some are made on a Monday I guess. Thanks for the post.
@@knightingalesaid I wish I had it today, and would only use it for it's incredible accuracy in single action. But at the time my S&W, Colt, and Ruger revolvers had better DA, in that order. Now I only have pistols (semi auto) but look back on the .357 as an excellent cartridge.
開発に携わった方なのですね。素晴らしい発想ですね。
谢谢您
DW Model 15-2 V8
Ventilated Shroud 8” long
@@RoBear-xo6zw Yes sir, you are right!
Would you like to sell
No! Check Guns America, they may have one.