Home Automation XY-TR01 Temperature and Humidity Relay Thermostat
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- **** Free Course ***
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
Step by step learn how to set XY-TR-01 as heater controller, cooler controller, humidifier controller and dehumidifier controller.
The best thank you for me is to not to skip ads and Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe and enable the bell 🔔.😊
Jump to different section of video by clicking on the time:
00:00 Intro
00:42 Hardware explained
05:52 LCD features explained
09:45 Wiring Explained
12:39 Heater Control demo
16:12 Cooler Control demo
18:50 Humidifier Control demo
22:26 Dehumidifier Control demo
24:19 Conclusion remarks
Get user manual and resources for this video: robojax.com/L/?id=157
===Purchase this module ===
from Amazon: amzn.to/3kCicx4
Supporting via PayPal: bit.ly/rj-paypal
Learn Arduino from proven instructor on Udemy: bit.ly/rj-udemy
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instragram: / robojax
Tutorial by Ahmad Shamshiri form Canada
****************************
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
Learn Arduino in 30 Minutes (video): robojax.com/L/?id=135
****************************
If you found this tutorial helpful, please support me so I can continue creating contents like this. Here is PayPal link paypal.me/robojaxTV
If you want to learn Arduino from proven instructor on **Udemy**: bit.ly/rj-udemy
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instagram: / robojax
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino
#robojax_thermostat #robojax - วิทยาศาสตร์และเทคโนโลยี
Thanks for help
you are welcome. The best "thanks" for me is to subscribe to my channel. Thank you.
Please help me i have a problem. My XY-TR01 runs for a short time with the humidification relay switching on and off and then the unit stops with dashes across the screen like this ----.
When the dashes are across the screen there is no temp or humidity value and the relay stops switching. Do you have ant idea what the problem is.
I believe the dashes appear when the sensor is disconnected. So check it out. perhaps the sensor has issue.
how to choice h or c
Hi, is it possible to use two different sensors to control temperature and humidity in two different places with only one xy-tr01 unit? Thanks.
Hi, it does not matter where you put the sensors.
Hi can you tell me how to calibrate the controller.
I have explained it fully. If I did not mention it in video then it does not have. So watch the video fully
What link did you order with the sensor
this item has model number and can be found easily. I just added link to resources for this module. Thanks.
i have a question plz , i can connect my XY-TR01 with a computer ? if yes give me the software please :)
You can connect it via the TX, RX and GND pin and you can use command line or Terminal to communicate with this. I did not bother too look into it. Search online for help.
Please one Video Automatic load sharing of transformer using arduino
wow. this is interesting. What do you mean by "load sharing"?
Is it better than stc 3028.....
I have not tested the item you are mentioning.
Hi can you provide link for AliExpress
Thanks
Hi, Because this module has model number, you don't need link. just type the model XY-TR01 and you will get it.
Doesnt ship to India though
How do the do it calibration.?
You made me watch the video . I have show how to add offset, meaning add some value or subtract from the value to correct it. You need another device that is accurate, read the same temperature and with that device and then either add or subtract to make it accurate. Please each the video fully.
@@robojax thank you so much.im weak in english..Ok I will watch the video.thank you for your valuable speech..
Why do you always flex being from Canada?
"flex"? People have always asked where I am from so I am answering it in my videos. Believe me otherwise I would have to answer it to 1000s of people.
3:03 what ?!?!?!?!
LOL. Yes clear mistake and people will see the + and -. در کل توتوریال فقط غلطی را کشف کردی؟ چیزی خوب نیدید که یاد کنی؟
@@robojax oh shit
فارسی حرف میزنی که
چرا توتوریال عالی بود خسته نباشی
Why is it important to say your in Canada on every Video ? Otherwise good Video
Many people want to know so I answer them .