S&S Cycle Grand National Mufflers Installation : Milwaukee 8 Softail Fat Bob

We walk you through a step by step installation of S&S Cycle's Grand National mufflers on our 2019 Fat Bob Softail. This is a simple and straightforward installation that can be done with just a few hand tools. While tuning is not required it is recommended, something like the Vance and Hines FP3 would work perfectly www.jpcycles.com/product/126-...
Shop Grand National Mufflers Now - www.jpcycles.com/product/160-...
• Up to 12% more horsepower and 6% more torque (when used with Stealth Air Cleaner Kit)
• Race inspired design
• Black ceramic finish
• Removable dB reducer for back pressure and sound tuning
• Meets governmental regulatory J2825 levels for sound
• Deep performance rumble replaces stock whisper tone
• All hardware included
• No mapping required
• 50-state legal
#sscycle #MilwaukeeEight #WeekendWrenching

[@OhioGuy82]

I just installed these on my Fat Bob 114. Very pleased with the mufflers. Do yourself a favor and use the OE clamps. They are Total Seal and S&S are flimsy. Also, get some hex sockets. 3”. Makes life way simpler. Be sure to put painters tape on your swing-arm just in case your socket moves around and makes contact.

[@brazeagle]

Thanks for the great video.
Appreciated it.

[@diverbelow27]

thanks Awesome bike and awesome exshaust to fit in.

[@N1Caraguita]

Dope... video

[@Mike-in-PI]

Thanks for sharing the vid. These mufflers are talking to me :)

[@reddog907]

Oh yea, drop the DBs. Sweet sound.

[@bigalb8935]

I can’t get mine out you make it look so easy the black covers won’t budge how elts can we get them out the Grand nationals seem to be trouble

[@tarthuruttle1166]

Is this process to remove db reducer the same amongst other grand national slip on? I have a set on a heritage and am struggling with getting the end caps to pop off like shown.

[@f1roadblock]

Just put a set of Rinehart's on. Yup the mounting bolts for top muffler are a pain. I took a 3/16 allen socket, 3/8 drive, and cut the allen off to end up with a 1/4 inch long allen. Simply use a short extension for rear bolt and no extension for front bolt. Also took the heat shield off, only two more bolts, but opens everything up for fit and adjustments. I Like all the videos you guys do, thanks!
What was your favorite sounding slipon on this bike, disappointed in the sound of the Rineharts. Thanks

[@TheImtoomuch]

Good sounding exhaust and it even looks pretty good except for the fact that they made them smaller than the heat shields. Why? These slip ons should be larger in OD or just not use the stock heat shields.

[@DavideScalvi]

Hi ! could you please tell me if a special tool is need to remove the DB reducer ?

[@Tonkagage]

Which one is louder Between S&S (without Db reducers) or Vance and Hines slip ons?

[@beegio3951]

Nice video. I would like to remove the baffle but one of the three screws have an anti tamper screw. which tool I have to use to remove that screw? Thanks

[@AlessioR.]

@beegio3951 Ho lo stesso problema. Cosa si può fare? Te hai risolto?

[@weldedpixel443]

Even in neutral that bike wants to go.

[@seifoor]

I really like your watch. What's the brand? Thanks

[@jpcycles]

its a Garmin Instinct

[@1Paolod]

Trying to decide what muffler to put on on 2020 Fatbob 114.. I'm looking for the most rumble.. S&S sounds good with baffle removed.. Hard to tell on video

[@DarkArwen929]

Look into Tabb Performance with Zombie baffles

[@1Paolod]

That's what I did. Tab Performance with zombie baffles.. Very happy..😊

[@DarkArwen929]

@@1Paolod Did you do a tune? About to order mine now. Had to save up for it.

[@wrench-nk2pu]

please dump the music

[@mr.b3168]

Make your own video

[@DeBa1226]

Not sure why anyone digs that Fatbob, but it’s one of the ugliest bikes they ever made, alongside the Rocker, and the 1200 Sportster.

[@ericvancronk4919]

Okay boomer