ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
[UNBOXING] R601 JW3 TTI COMBAT MASTER - Awesome gas blow back unboxing
ฝัง
- เผยแพร่เมื่อ 17 ก.พ. 2020
- In today's video I am doing a full unboxing and Chrono test of the beautiful looking Army John Wick 3 RIF. Come check it out and make sure you like and subscribe!
Link to the RIF: www.taiwangun.com/en/gas-4/r6...
Pheas
Very nice review and just what I was looking for, hopefully I will order it soon. Good job man.
I'm getting one. Nice review!
Hey dude stumbled across your channel while watching many reviews for the combat, great review and I subscribed 👍
Long wall of text: My own two cents on the R601
So got mine, and yes externally it is one of my favourite airsoft pistols and shooting wise, very very snappy for a Green Gas even compared to some TM guns.
However, I must've hit the short straw in some of the internals
. There has been known QC issues here and there.
The leaf spring from what I can tell was a bit on the iffy side and the trigger disconnect misligned easily (causing it to turn into a bonafide machinepistol) and the spring in the knocker valve also misaligned very VERY easily. Luckily I had spare parts from a WE Hi Capa I neglect to use and turned said WE into a display piece. I also preemptively changed the hammer, I've heard that the Jag Precision/Army Armament one one is hit and miss according to some reviewers who used it in extensive tests and can snap, not experienced it yet but be warned if you don't have spare parts.
On the plus side, out of the box it is pretty gas efficient for a metal gun, can clear 50+ rounds with the magazines, maybe more if I had warmed them. 45 rounds on rapid strings (and I'm talking rapid) and the slide lock is very reliable due to an extended tab and the positive springs in Army Hi Capa Mags, about 99% of the time it locks back on last round where as I've had to modify slide locks on WE and AW guns to ensure they do. You may struggle to power stroke it initially on slide lock, but a small nitpick since I don't use it. I personally don't like the extended magazine release but it works very well if you're looking for it.
Trigger is decent but I won't call it the lightest 2011/1911 style trigger I've used out of the box, but it's combat adequate with positive reset, one I'd choose over a Glock any day. With some tuning, you'll be able to lighten the trigger if you are familiar with it. Furthermore I've found that for mine, it was tight fitting to the point that it prevented reliable resets no matter how I adjusted the leaf spring so I replaced the trigger with a spare.
The magwell extension is great, unobstructive and looks part of the gun. Out of the box it's pretty accurate; can easily shoot a small square target one side of the house to the other but a new hopup may improve the performance. You can bet your bum you'll hit some poor sod in a CQB arena, maybe even outdoors. The safety is also a bit on the loose side so it's a little bit too easy to engage and disengage, was able to tune it to liking.
Based on what I've seen, it's partial TM compatible with things like the piston and trigger sets but you may find it difficult to find a slide or barrel that'll match the 5.4 frame, you may be better off searching for the KLI/SRC Baba Yaga. Lacks trades and is 5.1 but that means it's better compatible with TM Hi Capa Parts, and from what I've heard, quite reliable and consistent with quality control vs Jag Precision with CO2 compatibility off the bat. I will also note that this gun fits perfectly with the 8-Fields Kydex Hi Capa/2011 holster.
I've gone through 2000 BBs as an endurance test, and it's holding up after the changes.
I found my new sidearm to replace my franken-1911 I put together.
So in conclusion: If you can procure it at £135 or less depending on where you look, it's a decent gun out of the box. It's not perfect in some areas and I will note that there are some quality control issues and my one was a casualty. HOWEVER, this is a great gun if you are willing to get hands on and/or replace some parts and turn it into your tuned sidearm. For those who just want a display piece, this'll do it at a cheap price and it'll look pretty cool for John Wick fans. For an out of the box working gun, pray that yours works as some have had great luck, others like me not so much. But for the tinkerer or airsoft gunsmith, this is a great base gun.
This is the jag precision one
@@w0mpyy25 Jag Precision is just another name for Army Armament, like how EMG is for Armourer Works
@@ReapingRose115 this was very helpful my combat master basically just died and sounds like exactly how yours did. hammer snapped off and also doesn't work with other mags. im guessing the knocker valve not being aligned right is the cause of this? could you explain what you meant with the trigger and leaf spring? you mentioned you replaced the trigger should i do that as well? what trigger is compatible? do you know what bbh is compatible with this gun? ive tried cow cow and guarder neither seem to fit the slide. do you know a good hammer that will fit and work with this as well? i love this gun and want to get it working again right now its a expensive paper weight....
@@jakejackson1771
The Trigger that was originally with my gun caused reset issues, coupled with the leaf spring which generally did not hold tension over a couple hundred shots which exacerbated them.
With the blowback housing, you might get away with a standard WE one but otherwise, kinda hard to replace it since it has its own fitting for the irons. Generally you're better off just replacing the piston head and getting a tighter fitting nozzle to get the best seal.
I'm using a hammer salvaged from my WE 7.1, so any standard hi capa or 2011 hammer fits fine. Same for the trigger and leaf spring. So far, couple thousand BBs in and the hammer has held fast, add a couple thousand BBs beforehand when it was on the 7.1, so if it fits TM or WE, the trigger and hammer should fit fine.
IMO, use Army 2011/Hi Capa mags. The knocker valve button is quite generous so it works perfectly with other hi capa's as well, just be sure to get some spare feed lips. I use TM hi capa feed lips as I have killed a few through hard use. The actual knocker spring may misalign during disassembly so your mileage may vary.
Mine's still going strong since the changes, I'm putting upwards of a couple hundred bbs through it just to pass time or practice. Good luck
@@ReapingRose115 thanks for the reply so just to recap. i should get a whole new trigger assembly? or by changing the leaf spring it should fix the issue. Im not sure what would make the trigger any better if i changed it? does it not go back as far or something? isn't the tension the gears hit from the leaf spring? but def a new leaf spring and hammer and they can be any kind that is TM compatible? i tried installing my hammer from my elite force 1911 b/c it was the only other pistol i had but doesn't see to work well i had a feeling it wouldn't but figured i would try first before buying anything. any recommendations on a solid piston head? i was pissed i couldn't get the cowcow to fit right bc ive heard great things about them. im sure there is a way to modify it but im not sure how. sorry for all the questions i just don't want to waste money buying parts again that don't fit
Quality AS ALWAYS pheas
Nice l picked up the R501 black and tan very happy with it it's a quality pistol
Just got mine and have put about 10 mags through it. It is a nice pistol. I love the weight of the gun and the trigger is very crisp. The stippling is suprisingly good and the licensed TT trades just put it over the top for the cool factor. It was definitely worth the $160 I paid for it. I don't have the STI or the KLI version to compare it with but based on how well the Jag version performs I highly doubt that the other 2 are any better of a value. 9/10 from me.
Please please, tell me what mags did you use all the original TTI mags are all sold out 😩
@@alexrye5094 I bought 2 spare AA/Jag TT mags with the pistol. So I have 3 total. Id imagine the regular Jag Hi Capa mags probably work. STI/EMG maybe?
i got mine for like £70
I bought this mostly because of the John Wick movies, and i love the 1911 design ✌️
Hello it is me again I have found the website and it is awesome for the rifle I want you get a free carrying bag it truly is awesome keep up your amazing work almost at 1k
Ah cheers mate I wasn’t sure if it was the same
Just got this today, the safety came a bit weird, and didn't let me shoot consistently, but now I've loosened it and it feels amazing. I don't like the safety but I love everything else about it, 8.5/10
how is it today?
@@g6briel it's been sold but I wish I didn't, if you get your hands on one don't let it go 😭
Bought one of these a while back. It's a heavy ole girl . It's nice and snappy on the green gas mag but when using the c02 mags it's bloody awesome. Not sure if it's just mine or they are all like it but mine really is really loud when firing. Love it
@@kyn246 not used in a long time but was fine last time used
how was this gun in play?
I think I'm gonna get this as my first airsoft gun because it looks absolutely beautiful and it's in in John Wick and who doesn't love John Wick.
I know I'm a year late lmao but a pistol isn't the best choice for a first
@@craigthegymrat a pistol is a great choice for a first airsoft, what? lol It's way cheaper and you should get down the basics of shooting close before you try shooting further
@@imitenotbe CYMA does an ak for 109 and its way better than a pistol for starting
@@imitenotbe I know its a great reply but a starter Cyma AEG will: outshoot it (range, accuracy, rate of fire, mag capacity etc), have much cheaper accessories (spare mags are about 1/4th of the price of a pistol mag, at most half), have much cheaper running costs (require basically no maintenance compared to taking apart your replica and lubing it after each use, charging a battery is like 2 cents vs buying green gas/co2).
Pistols are horrible to start with, just like snipers.
Cool thing about these is they are 100% TM compatible I bought one and used the slide, outer barrel, and grip on my TM HiCapa
What about the holster bud?
What about the hop chamber and blowback housing?
@@carlsonvicta699 it looks the same l, I run a Guarder blowback housing and hop chamber
@@isaacshively6705 ty for this info
@@isaacshively6705 i tried a guarder and it wouldn't fit my slide......
Ive seen other reviews where this army armament pistol has a threaded barrel
U always leave a little gas in mag as it will lubricant the o rings and to make it more smooth and stop it from drying out and try not to drive fire it also just saying but other than that it is a fantastic gun I would deffo recommend
I ordered mine yesterday from Taiwangun. I’m 48 and single and I’m totally stoked for this piece to arrive. I’ve also a Gun Bros stainless steel hammer and sear set on its way. I’ve always wanted a race style pistol and this is a perfect base to start on. Nice review mate
I am surprised I am not single yet with the way I get with buying guns at times ha ha ha. Thats said, "it belongs to the channel" is probably used farrr too much! Hope you enjoy it though! I bet the hammer will work a treat. Pheas
@@PheasAirsoft Cheers buddy! 🇮🇪
@@Cheezwizzz You are very welcome. I love chatting to people in the comments! Pheas
The outter barrel has a inner thread i see it on evike and it shows and says it is
hello, i know this is late but what parts have you found to be compatible with this gun? I know its not 100% TM compatible i have tried both Guarder and cowcow blow back housing of neither of them fit...Also my hammer snapped off and needs to be replaced as well..i have also found that only the mags it comes with work. pretty disappointed with this. the gun started off amazing and in less then a year doesn't work.
Good video. It would be better if you could make a shooting test or say how many joules it have... Keep it up, you deserve a lot of more views and likes
Hiya, thanks for the comment. I am currently negotiating / trying to negotiate some space to be able to shoot them on video as part of unboxings, as no one wants to see my messy garage (plus my wife would end my life if I showed it ha ha) but it's certainly something I'm working towards. Thanks for the suggestion and Im glad you like the movie. I will make a note to comment on the joules as well as the FPS. Pheas
are there any aftermarket parts for this pistol like slides and barrels?
I have lost the second part of the spring guide, do you where i can buy one if that is possible?
Wow
❤️❤️❤️
Looks brilliant mate awsome video what’s the gas efficiency like keep up the great work also could you shoot them in the video so we have a idea of the kick and noise and stuff
Thank you for the comment. In the cold (about 10 degrees c) in my garage I managed to get the equivalent of about 2 full sets off BBS out of one mag full of gas, which is really good! Pheas
Pheas Airsoft thank you so much for responding cheers for reading your comments it would still be nice to see a shooting test though so we could get a idea of the blowback and fire rate 😀
Army armament vs emg,
In term of fire power, upgrade parts,
And ah, is jac precision is same like army armament
Just got mine, very nice and heavy. My question is that the outer barrel is very loose, especially when the slide is back. Any ideas on a fix, or should I return to TG? Thanks for your great reviews!
Hello! outer barrels can be loose and will be down to how well / tight they fit to the inner barrel. If you returned it it would be luck of the draw if you got a tight fitting one. They should be a free floating item more or less as they are superficial (mostly) and just for effect and will move about with the inner barrel. Pheas
Any recommendations for a holster for this gun
Goddamn i love these videos😍👏👏 Also got the same pistol and its heavy af!!
Thanks man. Glad you like them! Pheas
@@PheasAirsoft Is it possible to equip a tracer on the pistol?
@@fetech0154 Hiya, if they have a "threaded outer barrel" then you can fit an adapter to allow a supressor or tracer etc to be fitted, this one has a threaded outer barrel so you are all good to get an adapter (most tracers include one)
Pheas
@@PheasAirsoft HI! May I know which upgrade spare parts are compatible for this platform!? thanks 🙏
@@antonio.0610 hello. It's just a hicappa, so anything for a hicappa will be perfect.
Great review Sir. Is this TM compatible? Almost 100% i mean if the parts broke i can get the TM parts to replace it? Thanks
Hello. I am pretty sure it is just a TM hicapa internally so you should be fine to buy all the tm hicaa compatible upgrade parts for it. Pheas
how is it holding upo after a year? still any good?
does it take hicapa mags?
can you power stroke it?
I’d if you will see this comment but do you have a link of full disassembly top and bottom and a full re assembly?
Hiya, I didn't do one, but if you search for hi-capa disassembly you will find everything you need. Pheas
Hi! Is the ambi thumb safety really working, or the one for left thumb is only aesthetic, as I read somewhere on the web? As I'm left handed, it's pretty important. Thanks!
Hiya, I will have a check this afternoon for you, but I think it is aesthetic only. But I will check and come back to you! Pheas
@@PheasAirsoft thanks a lot mate! Really appreciated.
I just ordered this, excited
Well, how is it?
@@jimmythecacodemon2397 Great man!
@@stephenpendegraph7209 the materials of build, how are they, it is reliable?
Yes ,very good quality, smooth action, great trigger. No problems so far.
Same
Is there a safety switch lol
All airsoft replica should sai " it needs replacement parts at 3.000- 4.000 rounds" or something like that
They should, but they can't be sure of how long it will take as some parts might not make it that long and don't want it using against them when it breaks early. Pheas
Hey dude, this might be a daft question.. but do you know if Taiwangun are still taking orders & delivering at the moment? with everything that's going on at the moment, I wasn't too sure. Thanks.
Hiya, they certainly are taking orders and delivering. We did the £900 order just as the UK lock down began and they sorted the order and posted it out, UPS delivered it with no problems, just be aware that delivery companies at the moment seem to drop the parcel at your door, knock and take a photo as proof and then leave, which could leave your parcel in a delicate position (just something to think about) Pheas
@@PheasAirsoft Ahh awesome man, thanks for getting back to me so soon! I'm currently off work due to our factory shutting down because of the virus, but I'll be sure to listen for that doorbell ringing haha. Thanks again buddy 🤘🏼
@@reecewest9602 my pleasure! Good luck with it and stay safe! Pheas
How much is that pheas my money is only 125$
Love you vids
Still remember the give away?
I'm just waiting for the prize to arrive then I can film and post the competition video!
£105 is about (currently according to Google) $136 roughly, but not sure other other retailers in the US will sell it for less than this. Pheas
Ik you did this 4 year ago but I have a question as I have just bought one of these.
Like a real one works. Can you just pull back the hammer instead of the slide and pull the trigger
Ik that wont chamber a new round ofc, im just curious.
And also do you need gas in the gun to pull the trigger and have the hammer hit.
Like when you pull the slide back, hammer goes down and stays down, and you pull the trigger with no gas in the mag or even a mag in the gun, will the hammer still strike and work like normal?
Hello! Yea you can just pull back the hammer and pull the trigger, gas is not needed for that function to work. Nothing will move (like the slide) unless there is a gas in the mag. Pheas
@@PheasAirsoft legend, thank you bro, responding to me 4 years later. +1sub
I’d be amazed if you see this but is it a pot metal or a cnc aluminium or alloy ?
Hiya. It's made from an alloy, I would say from the very clean lines on it that it has been CNC machined don't quote me on that part. The metal is certainly not pot metal though. It seems to be bearing up very well in the face of a fair bit of abuse, I talk regularly with the guy who owns it now and he says it's still in top condition... And he uses it ALOT. Hope that helps. Pheas
Mine is threaded.
It's been two weeks since I ordered, still isn't here. How long did ur order take?
Hiya. My stuff, to the UK, from Taiwan gun usually takes about a week to 10 days. But that was before brexit. I have done an order earlier this week and it has been dispatched, but not sure what will happen now with customs and how long it will take. Pheas
Full metal?
is the slide and outter barrel metal? or is it plastic?
Hiya, they are both metal! Just been and done the bite test ha ha ha. Pheas
Pheas pls can ya pls answer me should i get a classic 1911 with rails or just buy a hi capa
Hiya. In this case I would go with the Hi-Capa has the mags have much much higher gas capacity and so will give you more shots than a standard M1911. Hope that helps! Pheas
@@PheasAirsoft thanks that is a heartfelt apreciation but does a hi capa and classic 1911 share the same parts
@@MOana-zi4dm Hiya, I am not an expert on pistols in general, but I would have thought there are some similarity of parts in some areas, I do know that the hi-capa range has a massive amount of after market parts as they are often used for competition shooting as well as airsofting, so the ability to customise and improve performance is exceptional. Hope that helps!
Pheas
@@PheasAirsoft thank you again brother
@@MOana-zi4dm You are very welcome!
Can you remove the extended mag release?
I am pretty much certain it is compatible with anything that is hi capa based. So I would have thought that the mag release can be removed and changed. Pheas
Is this or the r501 better? I only have the r501 available at stores
Hiya, Internally they are both pretty much identical to be honest and take the same mags, its just the externals that are different. If you only have the R501 available then you wont be disappointed with it! Pheas
@@PheasAirsoft Thanks! I'm only going to buy one for backyard use because i have no airsoft fields near me.
Why do you have to hold the thing down when firing?
Hiya, if you dont, and and the mag is empty. it wil lock the slide back as its a feature of the set up., SO if dry firing (with gas but no bbs) it will lock after ever shot and you have to click it down. If there is ammo in then it will fire as normal without messing with it. Pheas
Would you consider it a hi capa if so is it tm compatible
Edit: do taiwangun have two tone
It is hi capa compatible
Hiya,. It is TM Hi Capa compatible and unfortunately TG do not offer two tone which is a real shame! Pheas
@@halpala9691 Thank you for jumping in to help out ! Pheas
@@PheasAirsoft good to know you are always there to answer questions
I run the gun as my primary and would like to buy a new one, p.08 made by kwc
This is sweet, but didn't John Wick use a Glock 34?
He did in the second movie and i think in the beginning of the 3rd
hey, im really dumb XD what mm bullets do you need for it?
Hello! You need to use 6mm BBS in 0.25g weight. Hope that helps! Pheas
Hey, thank you so much!
this one or the src one?
I don't know enough about the SRC one, but based on what I can see online, I would probably go with this one! Good luck with your purchase! Pheas
Hi did you have to pay import tax
Hiya, as the UK is in a transition period of leaving the EU we still benefit from the free trade so there is no import taxes in anything coming in from Europe. Hope that helps. Pheas
What tracer unit will work for this airsoft gun?
Hiya, once you have a threaded outer barrel on it any tracer unit will work perfectly well, just be careful of going to large as the tracer if too big can pull down the outer barrel and the BBS will catch inside and not shoot out properly. Hope that helps. Pheas
@@PheasAirsoft where would you get one?
@@w0mpyy25 the only place I've actually seen them in Taiwan gun. Here is a link as they currently have them in stock: www.taiwangun.com/en/gas-4/r601-jw3-tti-combat-master-black-army-armament?from=listing&campaign-id=14&q=R601
Pheas
@@PheasAirsoft i was referring to a threaded barrel because I've yet yo find one, however thanks for the link!
@@PheasAirsoft that one has a threaded inner barrel in the picture but the reviews say it is not threaded. I’m confused
where do you buy it
When I got this, brexit hadnt happened yet so I got it from Taiwangun. SInce brexit has happened now, I would buy in country (UK) Pheas
is 4.5mm bbs correct for this gun????
Hello! 6mm bbs for these only, Pheas
@@PheasAirsoft thanks alot 👏
What mags do they take
Hello! They take TM spec Hi-capa mags. Pheas
@@PheasAirsoft ok thanks man
How to get one of them
Hiya, its a case of waiting for them to come back in stock at taiwan gun.com
Pheas
Does anybody know where to get extra mags for this
You should be able to use the normal hi capa mags. Like the ones for the r501 I believe it is. Pheas
Do I need ukara to buy this?
Hiya. Yes you do. Anything that's not 50% (or more) brightly coloured (Green, blue, orange) requires a defence to buy it in the UK. Pheas
@@PheasAirsoft is the 518 video going out tomorrow mate?
@@majordoubletap2027 Hiya. I can confirm... That there will be a video tomorrow and it will be the 518 unboxing video! I've filmed it this afternoon, just need to edit it (probably in the morning) covid has made me exhausted now! Pheas
@@PheasAirsoft can’t wait bro sorry for the rush order g you the best man ✌🏽
I dont know If I have the courage to buy anything from Army considering their bad quality reputation
Perlenbacher there AUGs aren’t bad to honest
Hiya, thanks for the comment. I will be honest and say that their pistols are very good quality (the ones I've had) their aegs on the other hand have been hit and miss. So I can appreciate where you're coming from. Pheas
@@danielwaller1311 thanks for the comment. That's reassuring for when I can field test the one we have. Pheas
Pheas Airsoft to be honest I have used a few my mates one one I rented and one I bought both my mates and the one I rented worked well but I must off got a lemon as it fell apart on me
Wait its only 105 pounds in US its $165😂
OUCH! thats some mark up. The thread on ours wasn't a thread, it looked like it, but wasn't unfortunately! Pheas
@@PheasAirsoft taiwan gun is just very cheap for some reason, pretty sure they do some magic when they are importing stuff.
@@d33pblu3 I wonder if they have some form of free imports from china or from another agent somewhere else to get around import duties. OR they are soooo cheap that even with the import costs into poland and then on to the uk or wherever else its still super cheap. It is good how cheap they are. Pheas
@@PheasAirsoft apparently they work directly with manufacturers instead of having some sort of a middle man that deals with the Chinese.
My son is a big fan of you and BB guns it would mean the world to him if you gave him the BB gun
Hiya, glad he is a fan, unfortunately most of the BB guns are spoken for already. But keep an eye for my next giveaway coming soon! Pheas