@@2fmrc well the lighter smaller body hugs the frame rails, narrowing that suspension geometry line as well as being lower, the roof line where you mounted the reciever is about the same as the stock mount. effectively your cg was lowered about a foot or so in this scale.
@@2fmrc essentially youre driving frame rails with seats and a roll bar on top. Youre shortening the effective lever the weight above the frame rails has.
There’s another one that is similar. It’s called a warthog. I have a spare CF chassis and was thinking of shaping. Body similar to this using PVA sheets.
Sweet! Yeah I’ve kinda always been the opposite. I just seem to want whatever will do the most. Even with the 1/10 stuff. I love the look of scale rigs though! I just don’t have the skills to put them together well usually lol
i say keep the track width you have now, and add as much weight on the axle line as possible. metal axles, brass diff covers and knucles and the high clearance links, and youll be at the max of what an scx24 is capable of.
Well it’s been sold out for awhile now. Not sure if it’s coming back or not. I found it on eBay. The mofo Rc 050 is a good option as well. It’s not quite as powerful in my opinion but a good option at least. moforc.com/store-home/ols/products/torquebeast-50-motor-050-size-scx24-direct-replacement-with-brass-pinion-gear-new-motor-plate-and-harness-installed
Bought one a day ago or so!! Bad ass build Matt you are the scx24 man!!! I've also begun to go mad with this trucks. Got my RC4WD Toyota Land Cruiser still in the RC4WD shipping box 😂 because these little critters are a load of fun. Thx again for a well presented vid 🤘🏻🤘🏻 Rock On 🤙🏻
Dude I ordered one of these over a week ago and I’ve had absolutely no communication. Actually even tried to send a message through their Facebook page and nothing. Do you know if they’re still doing these I tried to order one of his spooky Limited addition units but I’m not even sure if I’m going to get it now
Hey @Large Scale Life, did you ever get a reply? I ordered one a week and a half ago and haven't heard anything, just the order confirmation email. I reached out via their sales.originrc Gmail a few days back to see if the kits were backordered And what lead times might look like, but still no response 🤷🏽♂️
@@Yamahatwig yes I did and it’s really nice. Spoke to him through messenger he is a student athlete and gets pretty busy a lot of times he can only work on the weekends so be patient I’m sure you’ll get it it does take a little time but worth the wait.
@@LargeeeScaleLife ahhh that makes sense. I assumed it was a small operation and lead times might be long. I just started to worry after I saw your comment above. I appreciate the reply, this put my mind at ease. Now I'll just have to contain my excitement and be patient... haha
@@Yamahatwig I was really happy with it it’s a very well-built product it looks really nice the holes are tapped pretty well. I did order a set of really small nuts to put on the back of some of my shock hardware I do that on a lot of these little trucks that run a printed chassis not something you have to do but just something to keep in mind. Right now I’m running it with standard deadbolt length set up and it’s working out really well basing running almost a full droop set up running oil shocks with extremely soft springs mofo Torque they used motor with a two to gain on the pinion for a little more speed and it’s working out great also running some steel stamped bead locks set up deep dish it pushes them out just wide enough without adding any extra wheel spacers. Super happy with it
Those are the rc4wd 1.2 rock crusher mt brick edition tires. They are mounted to some lifted customs wheels for 1.2s. You can find the tires here bit.ly/3qQJmFd
I wonder if you have any ideas for me. I got the new komodo motor combo and I'm struggling to get everything under my c10 body. I ordered a flysky today so I get rid of the stock esc. Do you know of any esc or battery trays for relocation?
If you’re gonna run the flysky you’ll need an esc to replace the stock one. I’d run the Furitek lizard if space is an issue. It takes up hardly any space at all!
I believe you could make it work. You may have to move the esc back to the rear and run the battery under the hood and up over top of the motor but I think it could be done fairly easy.
Ok, I am already eyeing to get a 2nd SCX24 just so I can try this chassis. But...I keep flipping back and forth on which SCX24 would be best for this project. So..I am going to ask for your advise. I have read that people feel that Deadbolt is the best model because it has longer links out in the front. But..I can't find any 8 links kit for the Deadbolt. Or would you get another C10/Jeep SCX24, since there are more options when it comes to 8 links and overall when it comes to upgrades? PS...have you tried to fit the Furitek motor setup into this chassis yet?
after hearing you rave about the ox motor i picked one up. wellll, the ox motor is garbage. just so you know where im coming from, yesterday i threw the stock motor back on (from furitek chameleon). i drove it around a bit. i immediately threw my furitek chameleon back on, a significant improvement in low end power and control. today i got the OX motor. i threw it on and wow was i unimpressed. it just like the stock motor but maybe has slightly more low end power and control, MAYBE. how is this a $25 motor? shit should be 10 bucks. i cant imagine you could get a worse 050 motor for the scx24. i would say its an improvement over stock but damn, hardly. i also noticed it gets significantly hotter than the chameleon but the chameleon also has a sticker wrapped all the way around it, still would think after half an hour of use you would feel whatever heat it has through the sticker. just buy a chameleon. i would love to check out the injora motor also.
lol this motor was where it was at probably 3 yrs ago. BEFORE there was any such thing as Furitek. Now we have wayyyy better. These crawlers have come a long way in the last few yrs. Sorry to picked this motor up so late in the game but yeah it’s nothing compared to what we have now. At the time this was shot we had stock,barrage and ox motors. That’s it! Now everyone and their brother makes a motor for these guys lol
honestly what makes this build good is the wheels and tires, the ground clearance is huge.
Yeah it does help a ton! With its narrow wheel base and that much clearance though I kinda figured it would be way more tipsy.
@@2fmrc well the lighter smaller body hugs the frame rails, narrowing that suspension geometry line as well as being lower, the roof line where you mounted the reciever is about the same as the stock mount.
effectively your cg was lowered about a foot or so in this scale.
@@2fmrc essentially youre driving frame rails with seats and a roll bar on top.
Youre shortening the effective lever the weight above the frame rails has.
Loving the belly dragger builds lately on youtube!
Just ordered one last week been waiting forever for it to ship.
That ox motor is awesome I have 3 of them on all my rigs… going to upgrade to the Furitek Komodo
"Not 100% sure where everything goes" said everyone at some point lol
Haha! So true!
Pretty cool 1/24th scale body !!!! 😲👍🤘 Yay-ah !!
Best custom micro-scale 3D printed body I have seen yet !!! 😁
Pretty cool 👍👍 I cant wait to see what upgrades you go with and how it performs then
Thank you for sharing
It's cool to that it has a cab. The others I have seen just look like the body was removed and that's it. Nice vid bro!!!🤘🤘🤘
Thanks! Yeah this is my favorite out of the ones I’ve seen. It actually looks like something lol
Thank you very much for the video!!
Anytime!
HELL YEAH BROTHER 🤟🏽
Awesome little chassis. I'm thinking about one myself. Nice work mat. Got one myself haha.
Nice!
Okay that's cool. Think I'll build one myself.
I like the look of thaf chasis, great run, nice course 💪😃😃
Just clicked your link and bought one. That look too good. Now i just don't know how many weeks before it arrives here in Philippines.
That one bad ass little rig
i swear, every time i think of buying something you make a video on it. lol. good stuff
Glad I can stay ahead of the game just enough to maybe help out a bit with the decisions! That’s what I try to do lol
Revisit of some old skool footage.. still got this little beast? An update/upgrade time… maybe a giveaway, cuz they ain’t available today..?
There’s another one that is similar. It’s called a warthog. I have a spare CF chassis and was thinking of shaping. Body similar to this using PVA sheets.
I seen that one on Facebook. Pretty cool. Both very similar
Man doesn't look like much scx24 left lol great video
It’s actually all stock Scx24 besides the cage. Basically like changing the body lol
What wheels are you using to go with the 1.2" tyres ?
Typically my build focus is on scale crawlers......nonetheless a great video!!
Sweet! Yeah I’ve kinda always been the opposite. I just seem to want whatever will do the most. Even with the 1/10 stuff. I love the look of scale rigs though! I just don’t have the skills to put them together well usually lol
Sold! Haha! That chassis is awesome!
i say keep the track width you have now, and add as much weight on the axle line as possible. metal axles, brass diff covers and knucles and the high clearance links, and youll be at the max of what an scx24 is capable of.
Any link for that OX motor? Been looking at 050 motor options
Well it’s been sold out for awhile now. Not sure if it’s coming back or not. I found it on eBay. The mofo Rc 050 is a good option as well. It’s not quite as powerful in my opinion but a good option at least.
moforc.com/store-home/ols/products/torquebeast-50-motor-050-size-scx24-direct-replacement-with-brass-pinion-gear-new-motor-plate-and-harness-installed
So how did you turn the transmission and motor?
Bought one a day ago or so!! Bad ass build Matt you are the scx24 man!!! I've also begun to go mad with this trucks. Got my RC4WD Toyota Land Cruiser still in the RC4WD shipping box 😂 because these little critters are a load of fun. Thx again for a well presented vid 🤘🏻🤘🏻 Rock On 🤙🏻
I totally know that feeling! Definitely let me know how you like yours!!
@@2fmrc will do
What esc are you running with the ox motor?
Stock mostly. About to put one in my mofo build with a Furitek lizard pro.
If you primarily ran this outdoors would you lengthen the wheelbase or still leave it as is
Idk? Most of my rigs are super stretched and widened so I’d probably leave it. Good to have something a bit different lol
Dude I ordered one of these over a week ago and I’ve had absolutely no communication. Actually even tried to send a message through their Facebook page and nothing. Do you know if they’re still doing these I tried to order one of his spooky Limited addition units but I’m not even sure if I’m going to get it now
Hmmmm that sounds odd. I’ll shoot them a msg on Instagram and see what they say. That’s the only contact I’ve ever had with them.
Hey @Large Scale Life, did you ever get a reply? I ordered one a week and a half ago and haven't heard anything, just the order confirmation email. I reached out via their sales.originrc Gmail a few days back to see if the kits were backordered And what lead times might look like, but still no response 🤷🏽♂️
@@Yamahatwig yes I did and it’s really nice. Spoke to him through messenger he is a student athlete and gets pretty busy a lot of times he can only work on the weekends so be patient I’m sure you’ll get it it does take a little time but worth the wait.
@@LargeeeScaleLife ahhh that makes sense. I assumed it was a small operation and lead times might be long. I just started to worry after I saw your comment above. I appreciate the reply, this put my mind at ease. Now I'll just have to contain my excitement and be patient... haha
@@Yamahatwig I was really happy with it it’s a very well-built product it looks really nice the holes are tapped pretty well. I did order a set of really small nuts to put on the back of some of my shock hardware I do that on a lot of these little trucks that run a printed chassis not something you have to do but just something to keep in mind. Right now I’m running it with standard deadbolt length set up and it’s working out really well basing running almost a full droop set up running oil shocks with extremely soft springs mofo Torque they used motor with a two to gain on the pinion for a little more speed and it’s working out great also running some steel stamped bead locks set up deep dish it pushes them out just wide enough without adding any extra wheel spacers. Super happy with it
Very cool track !! It looks like its a lot of fun. What wheels and tires are they? The larger size gives it an edge in climbing for sure. Cheers
Those are the rc4wd 1.2 rock crusher mt brick edition tires. They are mounted to some lifted customs wheels for 1.2s. You can find the tires here
bit.ly/3qQJmFd
I wonder if you have any ideas for me. I got the new komodo motor combo and I'm struggling to get everything under my c10 body. I ordered a flysky today so I get rid of the stock esc. Do you know of any esc or battery trays for relocation?
If you’re gonna run the flysky you’ll need an esc to replace the stock one. I’d run the Furitek lizard if space is an issue. It takes up hardly any space at all!
What rims are these? I just ordered the rock crusher 68mt from Rc4wd. I am just wondering what rim you used to fit the SCX24.
Can you put the battery in the front on this chassis?
I believe you could make it work. You may have to move the esc back to the rear and run the battery under the hood and up over top of the motor but I think it could be done fairly easy.
Are those 1.55 tires
So I think treal came out with some high clearance links... They are cheaper than rc addictions, but I don't know if they are better, any thoughts?
Just posted a vid on them! Comparing Treal, Hot Racing and RcAddiction!
@@2fmrc thanks man!
Ok, I am already eyeing to get a 2nd SCX24 just so I can try this chassis. But...I keep flipping back and forth on which SCX24 would be best for this project. So..I am going to ask for your advise. I have read that people feel that Deadbolt is the best model because it has longer links out in the front. But..I can't find any 8 links kit for the Deadbolt. Or would you get another C10/Jeep SCX24, since there are more options when it comes to 8 links and overall when it comes to upgrades? PS...have you tried to fit the Furitek motor setup into this chassis yet?
Do you think brushless would fit?
I think so with the Furitek motor mount since it’s more centered. Then maybe a lizard esc to save room!
@@2fmrc thanks that’s what I was thinking as well
How's the life of the ox motor? Are you getting more life than stock?
Yes. It’s been great! Haven’t killed one yet
Awesome! Got 2 on the way. I couldn't hold out for the nano beast any longer.
@@2fmrc have you ran one on 3s much?
@@aucrc-alwaysunderconstruct2765 yeah it does fine on 3s
@@2fmrc thanks very much for the replies man. You've been a huge help and inspiration to my build and I'm very appreciative of that.
Which wheels are you using for those 1.2 tires?
These wheels came from lifted customs Rc on Facebook
Matt’s mat must match with most mini mechanics. 🤦♂️🙄🤓
Do you build any crawlers to sell I would definitely buy one let me know thanks
I wish I had the time honestly. I just keep so much stuff that I need to build/install myself that I just can’t fit any custom builds in. Sorry
Some nice saves as well Matt. Did you notice much difference from the Ox compared to stock?
What wheels and tires are those?
The wheels came from lifted customs Rc on Facebook. The tires are Rc4wd 1.2 rock crushers.
Battery should go up front or the middle , but not in the back , other than that sweet!!!!
Cute...
after hearing you rave about the ox motor i picked one up. wellll, the ox motor is garbage. just so you know where im coming from, yesterday i threw the stock motor back on (from furitek chameleon). i drove it around a bit. i immediately threw my furitek chameleon back on, a significant improvement in low end power and control. today i got the OX motor. i threw it on and wow was i unimpressed. it just like the stock motor but maybe has slightly more low end power and control, MAYBE. how is this a $25 motor? shit should be 10 bucks. i cant imagine you could get a worse 050 motor for the scx24. i would say its an improvement over stock but damn, hardly. i also noticed it gets significantly hotter than the chameleon but the chameleon also has a sticker wrapped all the way around it, still would think after half an hour of use you would feel whatever heat it has through the sticker. just buy a chameleon. i would love to check out the injora motor also.
lol this motor was where it was at probably 3 yrs ago. BEFORE there was any such thing as Furitek. Now we have wayyyy better. These crawlers have come a long way in the last few yrs. Sorry to picked this motor up so late in the game but yeah it’s nothing compared to what we have now. At the time this was shot we had stock,barrage and ox motors. That’s it! Now everyone and their brother makes a motor for these guys lol
Hey hit me up on Facebook messenger so I can send you some stuff to try out. Mofo rc
Do you know if a furitek komodo can fit in this chassis?
What wheels do you run with those 1.2 tires?
Where do you get the wheels?
They are some 3D printed wheels. Swifrc makes some. They are usually available on eBay just search Scx24 1.2 wheels
@@2fmrc thanks I found them