Homemade Cub Cadet dump truck
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2017
- Cub Cadet dumptruck ! Homemade from Sweden!
Built from Cub Cadet 3225, which has a 21-hp Kholer engine.
The entire front and mower deck has been removed and is shortened about 30 cm.
Converted to center steering with dual steering cylinders. The hub comes from a wagon and can be rotated 360 degrees.
The dump truck is copied from a Finnish container truck, Normacont.
The nice thing about the wagon is that it can be lowered to ground level and can be tilted, which is quite unique.
This is a small copy, the original can handle about 6 tons(metric) and is used for example by the defense of Sweden.
Were totally overcrowded when the hooklift came in the 80's.
Cub Cadet dumpers! Hemmabygge från Sverige!
Byggd från Cub Cadet 3225 som har en Kholer moter på 21 HP.
Hela framvagnen och klippdäcket är borttaget samt att den är kortad ca 30 cm.
Konverterad till midjestyrning med dubbla styrcylindrar. Navet kommer från en vagn och kan snurras 360 grade då styrcylindrarna är kopplade före.
Hemmabyggd i Sverie!
Dumpervagnen är byggd efter en Finsk containervagn från Normacont.
Det fina med vagnen är att den kan sänkas ner till marknivå och kunna tippas vilket är tämligen unikt.
Detta är en liten kopia, originalet klarar ca 6 ton och användes bland annat av försvaret.
Blev totalt överkörd när krokbilen kom på 80-talet. - ยานยนต์และพาหนะ
When the dump bed went down I thought he was going to back up so it was like a big scoop
As a large landscaping project loom on my horizon my go to solution is to build everything I need. It would be a perfect solution and well engineered.
seemed so logical. i thought the same. Work smarter not harder . Sometimes smart people like him miss the obvious
Do you know how big engine it would take?
@@Lancia112 momentum would force scoop the dirt in
So did I.
Terrific!
1.Being able to lower the bin to the ground is a terrific feature.
2.The ability to raise the dump to 45 degrees or so is excellent
3. Obviously very strong.
A possible weak point.
Looks like lots of nooks and crannies susceptible to water damage, rust and corrosion.
great dump truck!!! It's so inspiring. thank you!!
Даа уж! У комментаторов просто фантазии не хватает. Отличный мотоблок. Все только и думают что он должен задом заехать и взять груз, а потом типа разгрузить. Я думаю применение ему достаточно! Груз можно закатить, например бочку или рулон сена. Груз можно загнать, например скотину, так как не всякая живность будет к вам в кузов запрыгивать. Так же груз можно затащить, например станок какой нибудь, и так же легко вытолкнуть. Сделать задний борт, и отличная машина получится, хотя нет, она уже получилась!!! Автору респект!
С сша на основе такого прицепа катушки с кабелем возят и разматывают на объекте. Очень удобный прицеп для перевозки тяжелых грузов, бочки,камни.
Built by a freakin mechanical genius
As a large landscaping project loom on my horizon my go to solution is to build everything I need. I think this is a perfect solution and well engineered.
thats a nice build. you got the geometry perfect.
I love the trailer so much!
That is so freakin cool! Good job !
Wow this thing is incredible!!
Great idea and looks well put together. Low loader is brilliant. Cheers
Tractor Redefined :) Great Job.
Now that’s some awesome engineering! Great job , Thanks for sharing!
WoW ! We are impressed . . if it actually dumps anything.
Wonderfully engineered! I wish I had built it.
Very cool build! We posted this video on our homemade tools forum this week :)
Standing Ovation!
👏👏👏👏👏👏👏
Cue Boss Music!🤘😎🤘
You have me beat in the design category... nice work.
Thanks!
This is insanely impressive. Looks to be a great idea for a ranch or farm that isn't very big. I'm definitely going to try to build one of my own!
Please do, and post a video:)
Lancia112 I definitely will! I may cheat and use some pre-fab parts (dump box and possibly a scrape bar). Did you use the tractors hydraulic system or did you add one onto it?
What a great piece of engineering and design. I've been looking for a design like this for cleaning horse stalls in our barn and be able to dump it. Then use it for hauling large items with the lower to ground feature. I would love to see a video on your design and build. Great job!
Great dump truck! I like those hydraulically operated locks for the "reaction bars" that the original Normacont trailer didn't have. Maybe I should add the feature to mine... Thumbs up from Finland! :)
Jaw dropping trailer. Awesome. Congratulation , nice work.
nice work!
It looks beautiful.. and the fact has no front wheel is just pricel3ss 😂
Nice build
This is insanely cool. Well done sir.
thats one mad skillz dymper !
Hey do you have plans of the dump ??? Or any?
👏 Fantastic. Nicely done.
This is really nice! :)
Wicked cool. Nice design
Wow. What a beautiful job of engineering.
I hope you got a patent on that and protect your design.
Very well done!!!
Great job.
You be having some fun
what a glorious contraption! seems like you could mount the hinge points on the bucket to 2 beams, have a channel in that place on the bucket, and have it pick up different buckets like thunderbird 2. not sure what you would use that for though except for moving heavy equipment and having one bucket driving and one loading one driving, or having one with a closed bucket for hauling stuff that doesn't stay in place. adding some pilot operated one way valves makes sure the bucket doesn't go crooked with the pistons extended.
not to rain on your parade though, like i said, glorious contraption, and adds some real extra functionality to the regular tipper. loads of ground clearance vs bed height as well.
Yes, I've thought about it, but chose to weld the bucket as I have no use of putting it off.
Now that is very well built
Good luck with the Cub 3200 series charge pump on the hydro holding up for long. I've been through two in 500 hours just mowing my lawn.
Super Cool!
Awesome! You should make one with just the trailer that dumps. People would buy that. You could put a pony motor or electric hydraulic pump on it but nice job on a cool little dump truck.
Nearly perfectly done (part Swedish.. very proud of you!) I think very patent-able (self propelled, rear loading& articulated), a slightly larger unit would sell extremely well to small to medium contractors in the US .. You could name your own price.. Some version of self loading.. and so a bit more mid carriage strength .. would be very advantageous.FIND someone to partner with now! Absolutely excellent execution!!
Are there any build plans available by chance? I love articulating equipment. This is an interesting and unique build.
Bravo 👏🏼
This is great construction:)
WOW, Your work is brilliant.
Very cool set up man. Looks like you could just back into the pile with it on the ground.
Then I need more power from the engine😀
Good job brother
Good job,, I like this,,,
That has got to be the most beautifullest thing I ever saw in my life see y'all I told y'all they were smarter than we are LOL!
Nice work 👍👍👍
I don't want to alarm you but someone took your front wheel.
:) oh. No!
Haha
I think it’s actually suppose to be like that
@@dakotakelly9371 thank you for helping us figure it out. I was about to send the cops for help, JK buddy 😉
JW and you said you wasn't going to tell anybody?
Krásná práce, luxusní stroj ;-)
good build
Bra jobbat in i minsta detalj
Man tackar😀
well done!
Nice build! Unfortunate that no one has thought to make one like yours commercially for those of us that can't make their own!
Yes, you can. Will post a video about it😀
Awesome!!
You should build bbn it to where you can back into/ underneath the pile and lift to take the load...will the hydro rear end blush hard enough to push into the pile
This is the best of the best i need same 👍👍👍
Nice looking outfit, the only downfall is loadin by hand. Freaked me out when I couldn't see a front tire.
I like how you can drop the box all the way to the ground, but how about to where it barely touches the ground, yet your rear wheels are still touching, & reverse into the soft dirt mound & try loading that way. It might work. Ya never now until you try. Or try a sawdust mound or a straw mound. Add a tailgate so you aint loosing a fully loaded material of somekind when hauling around.
great design
Nice!! 🤔when I see dump down I think go back and loading by self,
wow really cool job !
F-N brilliant!
thats slick. any idea how much it will lift from ground level and how much it will dump?
That is cool man. I like that.
Wow i like it
What would you charge to build a frame mount mini backhoe for a Craftsman GT5000
great idea. May I Suggest an addition? On top of the bed rails, 2 more hyd. Cyl. Put a gate on the Back end, then the hydros would extend to close it tight, and retracting would open the tailgate, and i a sure you could figure out a way tho retract far enough to make the gate ventricle so it is out of the way. With the right pins in the hydros, a quick disconnect could be used tool remove the gate if needed
perfect
GENIO !!!!! MIS RESPETOS Y SALUDOS
Fantastic
Very Nice Work! I love it!
Thanks, is a big fan of your videos.
What type of drive axle are you using?
Я вавще думал что он задом поедит и загрузить сразу же )))))
я тоже
как скреппер, а по факту хренька
В начале ролика приболдел, но при виде лопаты, в растроенных чувствах посмотрел на мой фронтальный погрузчик, стоящий под окном🤪
Indeed yes
Тем более, что кучка лежала уже взрытая, и копать по сути ничего не было нужно...
Another example how a free people can build machines to advance human evolution.
Very Cool.
Good articulate truck
Very cool
what axial piston pump is there? where can i buy it?
Struck and Bob Cat here I come! Quick someone call Ed with the mini excavator, this gonna be awesome 😃
Man I love That vehicle baby
Can the hydraulics actually lift a full load of dirt from the ground? It looks like you might be able to hold 4000lbs of dirt in there.
Great work though, I have had ideas like this for years, good to see someone actually build one and see it work. I have thought that a similar thing could be done for a front end loader for vehicles not designed for one.
Smart!
Cool Invention
That's Awesome
It's neat but a front end loader would likely be more useful and a lot smaller.
Muito bom !!!
Amazing work, it's just shy of marketable !....... I've seen many home made attempts, of this idea, but none come close to this little gem ! I would think there would be a potential market in landscaping for this idea. I'm just sayin' ....
Do you have a set of plans available?
Awsome!
A video on how the steering system works would be good. Hydraulics at the articulation point?
Opp⁹p³pPPPPPPpppPPPpPPPPPaa
Why haven't I already seen this it's now 2020 3 years later. I would have liked to see an how to on this damn I liked it. Any chance of there being a how to like to see it.
is it front wheel drive?
Why are the front wheels gone?
Awesome engineering.. I love it..
Use like a scraper, just backwards. And no the wheels will not be in the way. Have a little tractor with a bucket on back and it loads just fine. and it has golf course tires.
Great job mate, what are the hydraulics originally from?
Hi, can I use part of your video to my compilation homemade inventions and projects ?
Absolutely not
@@astonike8383 shut the fuck up