Too much speed and not enough power, gear reduction would allow more power at a slower speed and more control. Also some larger wheels in the back, those small ones will sink down in soft or loose ground. All around nice build. A further modification would be to put 2 motors and individual controls for each side to make turns.
i hve stump grinder it must weigh 250 kilos its a push one could i make something to turn the wheels to move it as it would be very hard to push up an incline in a garden it does have a 12 volt battery to start the engine up
Nice job! I have to be honest though when you were loading the stone into the wheelbarrow with the sandals on I cringed! Keep up the great work and stay healthy! Thanks, DC
Parabéns. Carrinho de mão eletrico. Ficou excelente. Gostei muito 👏👏 Também da cor. Obrs Da para o senhor fazer um de motor de roçadeira a gasolina. Pai Eterno abençoe sempre o senhor e sua família e tambémproteja sempre de todo máu amém
If one could be built with independent wheels to go up a side step or other, this would stabilize the journey - would be so cool if a load could be easily lifted and completely dump. I bought a standard four wheel one - and the only problem is you have to turn the thing over to get everything out. Ugggg
In Russia, they would laugh at your modification of the garden cart. In winter, in the snow, it will not work for a long time. And also on the plot or in the garden, when there is a lot of dirt, it will not work for a long time either. Even with big grass, it won't work either. I did not expect such a stupid modification of a garden cart from an adult. In Russia, they say that people in the United States are stupid because of their school system and the media. I've already believed it. Please don't take offense at me. (Google translator)
Ta jakość spawów mnie wzrusza i ogólny rozmach projektu..
Mam wrażenie, że ten Pan się spieszył ...
A parts list would be handy.
Looks good. Next step should be to widen the wheels a bit and then install an actuator to tilt the bucket.
Электродвигатель на сварку...? Слов не нахожу.
Too much speed and not enough power, gear reduction would allow more power at a slower speed and more control. Also some larger wheels in the back, those small ones will sink down in soft or loose ground. All around nice build. A further modification would be to put 2 motors and individual controls for each side to make turns.
Definitely, gear it down for more torque, less speed…
qual a descrição deste motor e os componentes usado neste projeto . ou é um kit.
And old razor dirt or scooter motor?
i hve stump grinder it must weigh 250 kilos its a push one could i make something to turn the wheels to move it as it would be very hard to push up an incline in a garden it does have a 12 volt battery to start the engine up
İnvertörmü kullandınız
Onde eu encontro esse motor? ??
Nice job.. Question.. What is the size of the wheel sprocket that you use..
Hello my friend 🤝
Bel lavoro, semplice e pulito. Ottimo. 😁👍
👍🤝
Nice job! I have to be honest though when you were loading the stone into the wheelbarrow with the sandals on I cringed! Keep up the great work and stay healthy!
Thanks,
DC
😀 thank you very much 🤝
Stay FREE
motor watts?
it is possible to put wheels from garbage containers on the rear swivel wheels
What size sprocket is it and how many teeth does it have
BRAVO BELLA idea
Che motore hai usato?
I'm from Vietnam, nice to know you're passionate about mechanics 👍👍 let's share experiences together
What moter is that?
Would you tell us about motor and battery specs that you used ?
I'm from Vietnam, nice to know you're passionate about mechanics 👍👍 let's share experiences together
Parabéns.
Carrinho de mão eletrico.
Ficou excelente.
Gostei muito 👏👏
Também da cor.
Obrs
Da para o senhor fazer um de motor de roçadeira a gasolina.
Pai Eterno abençoe sempre o senhor e sua família e tambémproteja sempre de todo máu amém
I'm from Vietnam, nice to know you're passionate about mechanics 👍👍 let's share experiences together👍🤝
ฟฟฟฟฟฟฟฟฟฟฟฟฟฟ
ฟฟฟฟฟฟฟ
что за мотор и аккумуляторы какие .
If one could be built with independent wheels to go up a side step or other, this would stabilize the journey - would be so cool if a load could be easily lifted and completely dump. I bought a standard four wheel one - and the only problem is you have to turn the thing over to get everything out. Ugggg
24 volt motor or 12 volt. Batteries in series. Motor specs? Variable speed? Potentiometer on handlebar?
Huh? Do you see a pot switch on there?
What were the spec on the DC motor
Not rated for that invention for sure.
observation: That thing is hilarious. I bet you don't waste time on another one.
Hello my friend 🤝
Whta is that motor
Good..
Motor details please
750w24b
@@DIY.Invented thank you 👍
Nice welding mate 😂
Muito bom
Man is this thing a limb chopper !
좋은기술 가지고 계십니다 전동리어가가 필요
해구매 하고저합니다 연락요
La ruedas detras si deberion ser un poco mas grandes
NICE GOOD JOB I LOVE IT
Thank you
Where are you from man?
Cool. 👌🏻👍🏻
Thanks
👍👍 ❤👏👏
👏👏👏
🤝
Soon as I seen him use the pliers for a hammer I was done watching
Legal..
good job bro
Thank you
I missed, guessed a powered hand truck or cart.
Yeah. He mostly pushes it forward empty.
Fix the lathe, it shouldn't shake like that...
🙃😃👍
brainstorm
ok
In Russia, they would laugh at your modification of the garden cart. In winter, in the snow, it will not work for a long time. And also on the plot or in the garden, when there is a lot of dirt, it will not work for a long time either. Even with big grass, it won't work either. I did not expect such a stupid modification of a garden cart from an adult. In Russia, they say that people in the United States are stupid because of their school system and the media. I've already believed it. Please don't take offense at me. (Google translator)
It always astounds me that such gifted people can't speak and explain what they are doing.
That's a part of their gift! They can show us how without having to say a word.
or that the gifted people produce something you could actually use.
@@EricMooney å
Usually English isn't their first language and you'd just get a lot of nit picking comments about that rather than the content
전동구르마구입합니다여낙요
I'm from Vietnam, nice to know you're passionate about mechanics 👍👍 let's share experiences together
What size sprocket and how many teeth
too many welds
zrobił wózek sklepowy z taczki. weź klucz plaski numer 21 i pie.......nij się w pusty dekiel.
Lots of design flaws.
Ffdddddddd1
Шляпа!