Hey guys great group to watch and help and motivation and ok. I have a few old Chevys and the camaro behind him at 0:17 into the video......That's the kinda problems that I have on lot of my projects. I'm interested in seeing repair and when to replace. Thank you all for your help and education.
Guys, I bought your roller with the motor, and want to make a roughy 1.5" x 5.5" recess, which will get painted and then deceive a waterslide decal (before clear coat). So, can I make a sharp, 90-degree turn at the corners, or must I basically make the ends rounded, with a small radius rather than two 90-degree corners?
where do you live come help me i build hot rods here in maine as soon as my new shop is done this spring i make most of my own fab tools tooling if you cant afford anything else buy an arc welder grinder and a bigger mini lathe you can make all of this stuff check out make it kustom on youtube
If you had a camera and an LCD screen with a decent resolution.. 1 person. Have the camera lined up with the two bead rollers and you'll be able to see where the roller is positioned compared to the markings on the metal sheeting or piece.. and will allow you to manuevour the piece whilst turning the wheel and being able to keep a view of said position.
great video
Thanks!
Thanks Guy's , I go to the Alsip store in Illinois , a must for any custom work , Great Tool 🔩👍
hi from Argentina!!!! a lot of fans here!!!
Hey guys great group to watch and help and motivation and ok. I have a few old Chevys and the camaro behind him at 0:17 into the video......That's the kinda problems that I have on lot of my projects. I'm interested in seeing repair and when to replace. Thank you all for your help and education.
Sorry, behind Scott. The top of the windshield.
7:46 I correct myself corvair
Great video.
Can u make a video where u each bead to get an idea how to use the rest of the beads set
Awesome job guys !
Guys, I bought your roller with the motor, and want to make a roughy 1.5" x 5.5" recess, which will get painted and then deceive a waterslide decal (before clear coat). So, can I make a sharp, 90-degree turn at the corners, or must I basically make the ends rounded, with a small radius rather than two 90-degree corners?
i would love to have all those tools to custom fab. 👍👍
where do you live come help me i build hot rods here in maine as soon as my new shop is done this spring i make most of my own fab tools tooling
if you cant afford anything else buy an arc welder grinder and a bigger mini lathe you can make all of this stuff check out make it kustom on youtube
Free Contour SCT ? It should be free seeing how the new drums for it will break the bank !
Pirate theme! Arg. I'll be waiting for that stream.
I love that
Do you sell a one man bead roller ??
What gauge steel is being used for that floor pan?
Most likely 18 gauge, can tackle 16 gauge aluminum as well
Great work
How much are the complete cost of the unit and dies?
How much shrinkage do you need to take into account for the offset?
depends on what you are doing check out japhands customs hes got a really good show(s) on youtube
Show us How to make that trans tunnel on the table
Yes. Good idea for a future video.
Is it ok if I want to buy this toolkit? I live in VIỆT NAM.
How much can cost for cash money
Do you still do live videos?
So u have to have two people to operate the bead roller or can one person do the job.
If you had a camera and an LCD screen with a decent resolution..
1 person.
Have the camera lined up with the two bead rollers and you'll be able to see where the roller is positioned compared to the markings on the metal sheeting or piece.. and will allow you to manuevour the piece whilst turning the wheel and being able to keep a view of said position.
bordonadora esi se llama esta maquina
Great video, love the tools that you guys put out. Is there a reason that we don't see more video's on the motorized bead roller?
We have a few videos on the motorized bead roller. We'll definitely try to make more. It works great and is really easy to use.
I will definitely look them up then. interested in buying one, amongst many of your other tools.
OVC much?
Matt! Is that really you? I thought you only did old, rusty metal>
will forming dies fit on powered bead roller?
The forming Dies should fit most bead rollers with a 7/8" or 22 mm shaft.
I like to Win It
how do you win a sct
Visit www.eastwood.com to enter. There's a banner near the top of the page. Must enter by March 31, 2017!
can you gays show us how make a custom oil pan whet 16 gage metal
Hawkeye Matt ...
Es mejor con motor con pedal
Great video i need a discount
Uh...gloves are absolutely a must. One slip can slice your hand pretty bad.
wheres the freaking hemming dies grrrr
If it cant do 14 ga., I'm gonna pass.
Pro tip - Get a motorized unit
Well conveniently this can be upgraded with a drive system: www.eastwood.com/eastwood-bead-roller-drive-system.html
holy fuck i hope its not this slooooooow on every episode i had to go to 2x film speed
L
Por fabor y me regala su numero de telefono
great video