Teryx S Walk Around | All The Upgrades and Upcoming Plans
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- The mods to date on my 2021 Teryx S model.
-Boss stereo receiver: www.amazon.com...
-Boss aux port: www.amazon.com...
-Light bar mounts\ whips: www.amazon.com...
-Rear view mirror: www.amazon.com...
-Light bar mounts: www.amazon.com...
-Voltage meter: www.amazon.com...
-LED light bar: www.amazon.com...
-Boss speakers: www.amazon.com...
-Beadlock wheels: www.rockymount...
-Lighted whips: www.online-led...
-1” wheel spacers: www.amazon.com...
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
what Color are those tusk wheels? is that the Gun metal? or the machined? Appreciate the video sir! awesome Rig!
@@zbestgamer thanks. That’s the gun metal and black wheels.
I need the link for the front windshield
I don’t have the link to it. I bought it from the dealer when I bought the sxs. It’s a SuperATV flip up windshield thought
Nice ride. Thanks for sharing
Thank you
What fire extinguisher and holder?
www.amazon.com/gp/aw/d/B017HV2E6M?psc=1&ref=ppx_pop_mob_b_asin_image
www.amazon.com/gp/aw/d/B000Y4IKTU?psc=1&ref=ppx_pop_mob_b_asin_title
I like the Taryx but I love the mezzanines in your shop. Would love to see a detailed shop tour and your thoughts on what you might do different. I’m planning a Shop now and would appreciate your experience with this shop and any advice.
Thanks
Nice rig love mine
Sweet rig!! Thanks for posting videos on the 4 S model, not a lot of owner content out there! Appreciate it! 👍👍
Hope to have some ride videos from the Wildcat ATV park soon.
What's the link to your FIL's install videos? Or the link to his page.
th-cam.com/video/N9t3dEi8kOw/w-d-xo.html
So far I have a half windshield on mine. I just ordered some 30 10 14 Blackwater Evolution tires for it and just going to run the stock rims for now.
Those 30’s will look good. That’s what I will go with next.
@@DarkHollow26 when you are deciding what to go with try to find the actual height as I found some that were as much as 2 inches shorter than claimed.
one clean machine! I've got a 2017 T4 and I don't think the dirt comes off anymore. I do need a new set of wheels/tires but that gets a bit confusing for me. I'd like to be able to bolt on a set to my stock machine, all the same size. any suggestions?
I’m a fan of those carnivores. But if you jump up to 28’s I’d say you will have to do some mods but nothing too bad.
Very nice ride, one of the nicest kawy's Iv'e seen, classy one for sure. I agree now let's see trail videos.
Thank you. Hope to get some footage soon to post.
th-cam.com/video/I178b_Wk8IA/w-d-xo.html
I bought the Green version. And I love it. I purchased the new Bandit suspension for it a couple months ago and put a long travel industries cage on. Looks and rides great.
Where did you buy those aluminum mounts for the lights? Nice job btw.
Thank you.
www.amazon.com/gp/aw/d/B082XKHYXL?psc=1&ref=ppx_pop_mob_b_asin_title
im trying to be "patient" but ill be getting this same color in a week or 3...or who knows when, but I waited for the 22's to release!! love the machine!!!
I heard the 22 models have reduced cab heat and noise. That’s about my only complaints with mine.
Great video! Thanks for all the details..
Nice job! Thanks for posting the links.
Are the new wheels 7 inches wide? How did you know to put 1 inch spacers on back and not front? Are the wheel lug patterns 4/137? Tires and wheels on yours look awesome all same size and I want that for my 2017 T4 LE
The wheels are 7” wide and are 4/3 offset.
When I was reading specs on it. I saw the factory front and rear wheels were different offsets but machine was same width all the way around. So knew it would have to have spacers on the rear.
I don’t remember what the lug pattern is but when I looked for spacers I remember them specifically being for the Teryx.
What size wheels are they, the link comes up to 15x7, 4.0 +3.0 and 14x7, 4.0 + 3.0. I like the look of the Maxxis Carnivores
The wheel size I have are 14” with 4/3 offset.
Do you mind linking the video of your father in law installing some of the wiring for the switches and what not? I'd appreciate it! Great videos, thanks.
th-cam.com/video/N9t3dEi8kOw/w-d-xo.html
Good looking ride. Just got a 22 SLE. Where did you hid all your wiring for the light bar and speakers? From the video it looks like you took some time for cable management.
Sorry it took so long to respond. I somehow missed your comment until today. Here’s a video my father in law made on how we did the wiring.
th-cam.com/video/N9t3dEi8kOw/w-d-xo.html
What size did you use for the lights? Roll bar Mount Brackets?
I do believe those are 2”. They’re a little big and had to use a rubber shim behind them. I cut a old inter tube and used pieces as the shim.
Thank you for the information.
What light kit did you go with on yours? Do you have a link?
www.amazon.com/gp/aw/d/B01N7P3EB5?psc=1&ref=ppx_pop_mob_b_asin_title
This is the link to the light bar. Some links are in the video description. But if anything you have a question about I’ll find the link.
Was yours the 55in?
I believe mine is actually a 52”. A 55” may work better because I had to use a specific type of bracket to get it to fit.
What type of brackett did you have to use?
Nice ride, how do the boss speakers sound?
They seem to do real well. The position they’re in I think is what allows the front and back passengers to hear them good. I believe the volume will go to about 45 and we rarely play anything over 30.
The Tire wheel thing seems to be a total headache for me. I want to put on 30x11x15 but having problems with wheels. I want the same wheels you have and I want to square up my buggy. Any help you give would be appreciated with the wheels I know 15s but the displacesments are the thing Im having trouble with I do want a square buggy. Thank you
.
The wheels I went with are 14” Tusk Uinta wheels, all are a 4x3 offset wheel. The tires I’m running are 28x10x14 Maxxis Carnivores for now, eventually I will move to 30’s with clutch work. Where I’m running the same offset wheel all the way around, I had to put 1” spacers on the rear only. This makes the S model about 65 1/2” in width both front and rear.
@@DarkHollow26 Thank you
Great video!! Have been watching them since we found your channel. Could you please tell me at the tip top of your machine, what is the height? We have 81" clearance into the garage and it would suck if it wouldn't fit!! 😂😳
Mine is 80 1/4” at the peak now. I’m not sure what it was stock. I would love to do a cage chop on mine, which may be a good option for you should one not fit.
Do u sell original tires and wheels
Nah I hung onto to them in case I took it for warranty work and use one as a spare.
Did u order the 2” roll cage light bar mounts?
What size is this? 900?
No sir, it’s a 800.