Circuit Breaker Keeps Tripping - 3 Common Reasons
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Here are 3 common reasons the breaker in your electrical panel will trip. This is basic information to give you and idea of what could be wrong and how to troubleshoot the loss of power in an outlet or circuit.
To reset a tripped breaker, you simply need to turn it off then back on. If the breaker immediately trips when you reset it, you have a short somewhere. Start by unplugging anything in that circuit and see if the breaker holds. If not, you have a problem in the wiring or inside a receptacle box somewhere.
Remember to disconnect the power before working with any electrical circuits. It is dangerous.
Thanks for Watching and make sure you Subscribe to my TH-cam Channel for more videos.
Follow me on Google+
goo.gl/PfygmB
Check out my Appliance Repair Channel
goo.gl/ZPRtpC
Last Weeks Video
• How to Test a Wall Out...
Another superb video to help the "regular joe' homeowner to understand wiring, circuitry and home appliance trouble-shooting. We are very appreciative of your step- by- step visuals on this.
Good, simple, straightforward. Good job.
Thanks, Bill...for your common sense, straight forward approach, to trouble shooting a faulty circuit breaker.
Great explanations Bill. Yes, I like your vids. Very well presented. As a mechanical and electrical designer by profession, I can honestly tell you how well your videos seem to be presented IMHO. Great job again Bill.
Simple yet straightforward and informative!! Thanks, sir.
Thanks, I tried to explain to my sister but she couldn’t understand me. Thanks for making it easy so I didn’t have to repeat myself or calm down because she said I was yelling at her. Plus I’m in California and she’s in Queens N.Y. and there’s no way I’m flying back East to fix an outlet during this pandemic. I love my sister but she’s going have to pay someone.
Thank for the great video. Just had this happen in my garage....had a thought that it might actually be the original wall breaker plugin (maybe from age). I had trouble shooted the entire system. Replaced it and all is well :) thanks for the great video! Saved me probably 300-500 bucks! Much appreciated. Thumbs up!
You just saved me so much time and frustration. I had a wire that had a gash in it where my wifi router was plugged in
1. Overload due to accessories on circuit pulling more than the breaker rating.
2. Fault due to dead short.
3. Loose connection causing high resistance.
This was great. Now to make a video and find out how to find out what it was .
Excellent job explaining things to someone no in the trade.
Simple but very explanatory and detailed, thanks
Thank you so much for the educational video for this topic on why circuit breakers trip. Romano C.
Thank you, NOT a lot of bla bla bla, SUPER awesome and to the point. I'd hire you in a snap
I can’t understand the dislikes here??? Guy is speaking sense ☝️💯
We had record low temps(-30 celcius) an outdoor extn cord was causing the tripping of the circuit thanks for the help!
Thank you man ! Saved me a headache popped like 4 times in 10 mins. Never thought a weak breaker. Lol just been unplugging stuff
He has passed away.
Thanks, I somehow managed to replace a circuit breaker and cured a problem that has been on going for months. And thanks to you, I did not have to go to the ER to pull off the installation of a new breaker.
It's only 120 volts. Won't hurt you at all.
Thank you for helping us may you rest in peace
Thank you for showing examples!!
Crazy thing is probably all of the breaker manufacturer's inform customers in writing in their specs to change a breaker once it has tripped! I assume they say that only to cover themselves from liability. That would get expensive for owners though to change circuit breakers for everytime a breaker would trip. Good video, Bill.
Jeff
Journeyman Electrician
they do not tell you to change a breaker if it trips that would be a fuse. Breakers are made to be resetable thats why you buy them over a fuse. Also your breakers should ever be tripping frequently or your shit would fucked up.
Thanks for sharing, im a new electrician working here in the philippines this kind of information helps a lot. Tanks!👏👍
The 3rd one you just explained can also sometimes be attributed to the bad "jaw" of a plug-in type c.b. A simple non-contact thermal detector ( very common these days because of covid-19 to check human temperature ) is pretty handy to check the circuit breaker's temperature just to make sure its contact to the busbars is up to par, otherwise excessive heat from loose, pitted and dirty jaws because of arcing, can trip a breaker even with the right current load.
Thank you very much for those lessons. Very useful!
Miss your videos
Wow a weak breaker never thought of that 👍👍 , good advise 👍
explained very simple, thanks.
Thank you !
Thank you so much, my friend. Very helpful, and you are straight to the point.
Many thanks to you friend...
Thanks brother appreciate it have a merry Christmas.👍😃😃
Commentary doesn't get reply only because when the TH-camr gets a lot of views on his video, but he does not know that he always have to reply each and every comments to help his viewers in need because his video is all about problem solving.
You know this guy Bill passed away right?
Thank you sir this video is very useful for, because I have need to do about breaker trip. 😁👌
Think you . well done strait to the point and well explained.
I have now subscribed...
Thanks for sharing video and good tips too. Regards.
WITH MY LUCK IM WITHOUT LIGHT TONIGHT. MAIN BREAKER TRIPPED & EVERYTHINGS CLOSED DURING COVID19 AT 8PM. FML! And it's going to be the coldest night of April. 34 degrees
How about when the GFCI in the bathroom (also wired to the lights) goes out after a couple hours (trips). then We can reset it and we might be good for 10 minutes or a day..? Do you think the 15 amp breaker could be going bad!?
Thank you Bill
I enjoyed it thanks
Thanks ,good video. Brief and to the point.
Mine trips when I turn my heater on and it never did that before. I tried unplugging stuff but still no luck, I hate this camper!!!!
Great video! But if it touches an ungrounded metal box it won't trip the breaker and will cause that box to become energized
Thanks for this.. helped me out..👍🏽
A 4th reason: If one of the nuts in the panel is loose, it can create arcing which causes the breaker to overheat. I'm speaking of the nuts that secure the connecting bars that run from the meter socket to the breaker bus bars. I had never checked those nuts because I assummed that a panel from the factory would have tightened nuts. Not so!
Sir,
if LV cable insulation damaged , then CB will be tripped?
Thank you.
Hi! I am currently renovating my second bathroom. I will be replacing an old electrical baseboard with a new one. While researching books and the internet, I now have a better understanding of electrical circuit and the max safe operating load. When I investigated other circuit in the house, I found a circuit with a 2000 watts baseboard, plus a 750 watts baseboard in another room and finally a 2000 watts heating fan in another room. This makes for a total of 4,750 watts. Now, in the breaker panel, for this circuit, the breaker is a 240 volts 20 amp. Am I correct to say that it is not safe? If I replace the breaker with a 30 amp, would I sleep much better? Thanks for the good video.
Although I, as an electrical designer, would not load that circuit that close, it is wired correctly and complies with NEC. The load is non- continuous(runs less than 3 hours continuously) and can be loaded to 100% on the breaker. 4750 watts at 240 volts is 19.79 amperes. If it were a problem, the breaker would have been tripping. Adding another circuit to one of them would not be wrong if it makes you feel better.
Respectfully, Kevin
Very cool trick.. how you make trip the circuit!! Never thought about it..
With plug and two small wire!!
are these problems fixable?
78 people electrocuted themselves.
It's called culling the herd. Or, weeding out the dumb ones.
As of today 184...
Steve Hartkopf as of today 246
Can you provide detail? Over what time period and area are you referencing?
Thank you for the video! My husband and I have lived in our home for 3+ years. Our bathroom and second bathroom outlets are on the same circuit along with one outlet of the lanai. We have nothing plugged in full-time. Once in awhile I was using the outlet for a vacuum but we upgraded to a wireless/cordless vacuum over a year ago. Some time a few months ago, the outlets stopped working. We didn't realize it until we purchased a Waterpik and tried to use it in the master bathroom last month. We have no idea of how long the outlets were not working as we don't use them.
After searching TH-cam, we replaced the circuit breaker successfully. We plugged in a random light and it worked for a second.
We have an electrician called who is coming tomorrow at the tune of $65 an hour to figure out what is wrong. Any ideas? My husband is quite handy. He is currently disconnecting the outlet in the master and then has plans on doing the same to the second bathroom).
Informative video!
Very good and clear.
How do you know which one it is? We have a duel pole that only runs one thing an air conditioner. Well, this year I have noticed after turning it on and leaving for my uncles for a week, or 4 days, I come home(to check the house as its only 45 minutes away) and find the breaker has been tripped. I don't want to spend money getting a new air conditioner if it is a cheaper fix of just maybe the outlet being old or the breaker. As another outlet that ran an air conditioner had an issue with its breaker but it wouldn't run for more than 30 minutes. This one is running for at least a few days before tripping.
Great info. Thanks.
I have power all through my house not in my bedroom and it was my AC that was keep flicking
on and off and my light would flicker too does that mean it's the breaker
Thanks smart guy. 😁
That's a real amazing video bro keep it man.....!!!!
nice video for an amateur like me
Do you mind answering a quick question for me....I have a chandelier from home depot that I would like to convert to a plug in, rather than a "direct connection" (not sure what that is called). There are 3 wires. Neutral, Hot and a ground wire...however the ground wire has no sheathing on it. The directions state to route all 3 wires through the chains yada yada. Well I went and bought a two prong connector....thinking that the ground wire from the chandelier will be find to be grounded to the ground wire coming out of the ceiling/box. So that wire is grounded there...I ran the other two wires along the ceiling to a ceiling mounted 3 prong outlet. I plug the two prong from the chandelier into the 3 prong outlet and my 20A breaker trips. Again the ground wire (unsheathed) from the chandelier is grounded to a ground wire hanging out of the ceiling...is it because they are on two different circuits? Any help would be awesome.
my breaker is popping just running like 8 outside bulbs. no water getting in, wiring is good. the breaker is as old as the home so 23 years. they stay on awhile before they go off. does this sound like a breaker is going bad?
I have a breaker that I turn it on and after a few seconds it builds a small buzz, tiny spark and trips. It won’t stay on. Any idea? We’re gonna have an electrician take a look but came across your video and thought I could ask your opinion
Just got a new 200 amp panel and its tripping off a toaster should i call the guy or move the toaster cuz it never did that on my old one
Hey Bill great video mate
two appliances destroyed had to dump electrical persons said due to water damage never saw water damage what would cause two outlets to stop working and cause it to destroy the appliance
God bless you sir!
Good sharing👍👍👍
Hi Bill, thank you for your informative video. My question is why my GFCI outlet is not working; it has a solid red LED on. When I plugged a GFCI tester, nothing light up. The Circuit Line is hot when I tested it with a non-contact AC Voltage Detector. I even disconnected the Load line from the outlet. I greatly appreciated for any pieces of advice.
Hi I installed and replaced one of my breaker for my living room and I took out the old one and put the new one. After turning on the main breaker my family heard a loud pop in the living room. Is that a normal sound after installation??? Just curios. Everything is working fine now but just want to know????
I just changed a plug and replaced it with a new identical one. I put the wires securely in the same places and finished the installation. I went back and turned the breaker on and it trips, along with the main breaker to the whole house. This house (my sister's place) is just over 20 years old, and the old plug socket was working but the bottom plug had a black smoke stain on it ( it still functioned). Could it be the breaker itself? It's a 15 amp Kitchen split, a double breaker.
Sir why do I have both lights when I tested the socket's two holes using a pen tester after a possible tripped from a breaker, why is there a voltage present still? Pls answer ty.. gud day
If I am understanding correctly, you are testing a receptacle and showing it has voltage to it while a breaker is “possibly” tripped. Either the breaker has not tripped for that specific circuit, or the breaker handle has moved and is malfunctioning. If you know the breaker is absolutely connected and does not totally trip and open, get it replaced as soon as you can.
Respectfully, Kevin
Why did you stop making videos? These are great!
I read in the comments that he passed away same year he posted this video.
electrocution ?
@@SweetDee928 electrocuted ?
Sorry to ask you this stupid question. According to my aunt's office staff, the reason why the office MCB keeps tripping on certain days over a period of six month is due to three x faulty (expired) UPS and ask her to replace those with new UPS. I was wondering why UPS can cause these trips on certain days and not everyday. I also notices that there were ongoing renovations and other seminars there with additional extension cables etc. My opinion is if the use of power tools during renovations could also cause those trips? Thanks!
He passed away 😢
That’s for the info ...very helpful
if the screw hits your wire and trips it, and your not sure what screw it is , is there someway to pinpoint the problem without taking half of your drywall down?
Yeah you just gotta touch the screw with a hot/neutral cable
De energize the main circuit breaker and short both phase and neutral of house wiring, then use an ohm meter and start touching all nails while keeping the second lead to the short you made in distribution box using a long wire.
Yes. The safest way to do it would be to First turn on the breaker and see if it turns off again immediately. This will tell you that the short is still active. Sometimes a short will burn enough of the screw away where it will stop making contact with the copper.. In that case you're screwed and you'll just have to take out each screw one at a time and inspect it.
If it continues to trip the breaker immediately then keep the breaker off and use a meter to test for continuity between any dead plug in that circuit and each screw.
You will have to test both legs hot and neutral because you don't know if the hot and the neutral are shorted together or if a hot and ground are shorter together or if the neutral and ground are shorted together.
Run an extension cord from any dead outlet into the area that you're going to be testing the screws. Turn on your meter to continuity and connect one lead to one side (hot or neutral blade hole) of the female end of the extension cord and use the other lead to touch each screw.
If the screw Is contacting The conductor that shorted your meter will sing when you touch the right screw. If you get through all the screws and you didn't get continuity simply switch the meter leg to the others slot in the female extension cord and retest all the screws. One of the two should show continuity at least at one of the screws. If you find it, unplug the testing extension cord and simply back the screw out and reset the breaker. It may be the case that the screw didn't break the conductor and everything will be fine even though the plastic covering will be boogered up. If you find the screw and you take it out But the circuit keeps tripping you either have another screw that has shorted the wire or the wires damaged sufficiently that the copper conductors are continuing to touch even with the removal of the screw. If the ladder is the case you're going to have to open up your drywall at that screw location to determine the gravity of the damage and the course of action for repair. If the conductors are not severed and if there isn't a huge loss of copper at the point where the screw went in, you might be able to get away with slicing open the jacket of the main wire and then separating each wire and individually wrapping them with electrical tape and then finally wrapping all of them again to provide a new outer jacket for the set. after you have cut the outer jacket and separated the conductors and before you start taping reset the breaker and see if separating the conductors at the screw penetration point Is sufficient to stop it from tripping. If so, inspect the conductors to make sure that there's no huge loss of copper. If there is sufficient copper left simply tape up the compromised insulation on each leg and then retape the bundle to provide a jacket on the whole cable. Reset the breaker again to test your repair before you seal up your hole. As long as you don't cut a copper conductor you don't have to have a junction box. If there is a cut copper wire the proper thing to do is install a junction box at that location and hope like hell that you can get enough slack to get both sides of the legs into the box.
The other thing you can do but it's up to your discretion and you take full responsibility as to make the repair in the ceiling with a conductor splice and soldering the connections and then using high quality wire nuts to cover the soldered connections and then tape the shit out of everything. In the old days they used to solder and bury connections all day long.
They would solder and then wrap them in a rubbery sticky tape and then bury the conductions in the walls. Again, burying connections in walls is now against code but sometimes you got to do what you got to do.
Just know that I am an electrician and I am not counseling you on what you should do. I merely telling you what has happened in the past. You will make your own decisions and take full responsibility.
Yep ... a space heater plus exhaust fan in bathroom plus 6 60 watt bulbs = pop the circuit ...tyvm
if i drilled into my wall hitting a wire, how dangerous is that should cut out the drywall and see?
Excellent! Thankyou
Awesome job thank you
good one
I replaced the breaker but it keeps tripping. Not much plugged in and I didn't screw in or damage anything.
Ty so much
Did u miss 1? when water hits it does it trip? My whole circuit has Burns, along with the plastic Circuit Breakers, which I keep changing. I wonder if changing 20 amps to 15 amps matters? I am with I like today during covid 19 I'm screwed.
So whats at fault when i try to replace a blown bathroom globe, but when i turn to test it the breaker trips out and the new globe is blown ? Is it the globe point of contact, the ligt switch for bathroom or the breaker in the main box itself?
For a quartz heater I installed dedicated 20amp Square D circuit breaker, 12 gauge wire to a single round outlet, the wire run to panel is only 18 feet. Works great until I turn heater switch to include the second quartz element, it trips the breaker.., does that sound odd ? All components are new, should I have run 10ga wire ? Connections are snug and perfect, maybe a weak new breaker? Maybe we’re at the current draw limit of our 200 amp service panel already?
Thank you champ 🤗
Help! I accidentally left water around electric stove for about 20 hours. I dried it now, but it keeps trip the electricity. Haven’t cooked for days.
Why main breaker trips I were not using anything last night
Whats the most you can put in a 20Amp breaker is it 125%? If its not continious?
I hear a slight buzzing noise from the specific breaker that keeps tripping before it trips off. Unplugged all devices on that circuit, tried again. Still have the same issue. Because I’m hearing that noise, should I isolate the problem to the breaker or should I now take a look at the outlets to look for shorts?
Bad or old wiring can do that too
When my breaker kept tripping, I figured it was a lose wire in the wall outlet as it keeps sparking on sudden movement. I opened it to find out it was lose wiring with a few burned marks.
Hi bill this is Ed from southern California , listen I just bought a HYPER Touch 12A electric leaf blower from Walmart well yesterday I was using it and twice it popped the house braker and today I was using blower at next door neighbor house and it also popped the breaker do you know in simple tip on what can I do to fix this issue so I won't have to go and return it back to Walmart ? I really want to keep this blower and not go though the hassle of returning and all that jazz . I going to subscribe to your channel and I had few incidence when I accidentally cut my extension cord while I was using my hedge trimmer pretty scary
did you make a video for the other types?
Hi...my microwave tripping Breaker, advice??
Thank you
Hi Bill
Great job! I was wandering? will a short between load to net. Like the screw. always trip the breaker on that wire , or can it trip Main breaker?
Can you help? I have a Samsung electric smoothtop stove. It doesn't matter if I have the top going or the oven, if I turn the other on it trips the breaker. Just replaced the breaker and it's still tripping, any ideas? Thanks Monica
Probably the wrong sized outlet was installed (15Amp) when it requires 20...same with the breaker (that needs to match the outlet size
its been a while since I done any electrical work mostly forgotten everything
Ahh I didnt realize Breakers too die out over time, like outlets. how many amps an outlet takes, ok cool and yes this was very helpful!
What may be the reason for both two-way switches to lose power without tripping the circuit-breaker? It is running a ceiling fan with 3 lights. Could it just be a defective fan? doesn't make sense to me to kill both switches.
If you are pulling the chain on the fan to turn off the lights and the fan, and there is no voltage on either side of the switches, then the switches may be switching the neutral instead of the hot, which would be incorrect. Are you the one that wired it?
Respectfully, Kevin