.33XC MEGA ELK BLASTER

[@jaybigboy34]

I'm liking the new microphones.

[@quarterminutemagnums]

Dear Sir - Thanks. Hopefully they help.

[@aaronsmith7854]

I like to bed my seating stems with epoxy then relive the tip with a small drill bit for the variation tips. Works good and if you use enough release agent you don't loose a impossible to get Berger LOL

[@quarterminutemagnums]

Dear Sir - I have heard of that but never done it. If using only one specific bullet it would make sense. Thanks.......

[@cacinaz8802]

Welcome back. Question - does Kroil (when allowed to soak in the bore) loosen up fouling for easier removal? Q2 - do you accurize rifles to your specs? Q3 - I think I know the answer to this but do you teach reloading or do custom reloading if provided with the brass, bullets, and CBTO? Q4 - last question - whatever happened with that idiot that was buzzing you in that small plane?

[@quarterminutemagnums]

Dear Sir - too much for email, please just phone us........thanks.

[@cacinaz8802]

@@quarterminutemagnums Okay, thanks.

[@GraemeCaldwell-kc1gm]

Great to see you back , Do you remove all your copper in the barrels' . Some people say that the copper doesn't keep building up after a couple of shots you only have to clean out with oil .

[@quarterminutemagnums]

Dear Sir - we do what serious bench-rest shooters do. Go to a match - best education you can get. Thanks.

[@GraemeCaldwell-kc1gm]

@@quarterminutemagnums I live in country Australia , no bench rest shooters where I live,

[@quarterminutemagnums]

@@GraemeCaldwell-kc1gm Dear Sir - each barrel is an individual, you clean according to what the barrel (and targets) tells you it needs. See some of our old videos. Thanks.

[@charlesmullins3238]

I feel yer pain on bad brass…I had 3 nosler 6.5prc with splits and as hard as it is to find that makes a man mad…

[@quarterminutemagnums]

Dear Sir - when brass cost $3.00 per piece it should be perfect ! Thanks.......

[@charlesmullins3238]

@@quarterminutemagnums I told them keep it up and I’d sick you on em…so keep yer mask and outfit close just in case

[@Lure-Benson]

Does anyone know will the 33 XC work in a Weatherby Mark 5 action is this action long enough to be used for 33 XC ?
His complaints about the brass to be is nit picking and for me I'm not trying to shoot same hold groups in a match shooting event.
Once the brass is run through the sizing dies the shoulder is set to spec again.

[@quarterminutemagnums]

?????????????????????????????????

[@ceytoy13]

Sorry Sir. You still need a stabilizer (steadicam) or a tripod for the camera ( ; Because it is a little dizzy ( ;

[@quarterminutemagnums]

Dear Sir - we take donations.....thanks.

[@nvbullhauler75]

I’ll be a test pilot for yall

[@quarterminutemagnums]

Dear Sir - If you live close and work cheaply.......thanks.

[@nvbullhauler75]

@@quarterminutemagnums I’d work cheap just build me a 33 xc

[@caseyblack7144]

I would fly out just to blast a few with you. On the house, of course. I'm still waiting to hear your thoughts on the 7PRC.

[@quarterminutemagnums]

@@caseyblack7144 Dear Sir - Still no loaded ammo, still no brass ! Thanks.