Wilton Bullet Vise Modification Making The Base | Welding Table Upgrade P3

I fit a Wilton Bullet Vise to work on my welding table. My welding table is setup for a 2" x 2" standard hole pattern. I make an adapter plate to fit a 3-1/2" Wilton Bullet vise. This way I can mount the vise in any position on the table. The vise has been modified to make the use use of the vise easier when no mounted at the edge of the table.
Check out the Wilton Bullet Vise Modification video to see how I retrofitted the Wilton Bullet Vise.
🎯Wilton Vise Modification P1: • Wilton Bullet Vise Mod...
🎯Wilton Vise Modification P2: • Wilton Bullet Vise Mod...
🎯Connect with me on Patreon: www.patreon.co...
🎯Subscribe: www.youtube.co...
🎯Follow me On Instagram: / rrintheshop
🎯Dovetail Cutter and Scribe info: Email To:
[e-mail]

[@AmateurRedneckWorkshop]

Nice vice mount Randy.

[@RRINTHESHOP]

Thanks Harold. It is nice.

[@GregsGarage]

That welding table is one of the best I've seen.

[@RRINTHESHOP]

Thanks Greg, Works great.

[@MaturePatriot]

Very nice build. Looks too nice for welding splatter. Hopefully it is a TIG only table. Should be very useful. Thanks for allowing us to follow the build.

[@RRINTHESHOP]

Thanks Vernon, this is a no splatter table.

[@windyhillfoundry5940]

Really good ideas you have there Randy👌

[@RRINTHESHOP]

Thanks Clarke. Works wonderful.

[@pierresgarage2687]

This is a great welding setup....
Don't forget to cleanup and flip it vertical right after every project, or it will become just another horizontal surface allocated to projects on wait.

[@RRINTHESHOP]

Thanks Pierre. I have done that already a few times. Cleans it right off.

[@RockingJOffroad]

I like it, especially the holes at 45°, nothing annoys me more than a vice that rotates even tho it is tightened down!

[@RRINTHESHOP]

Makes it easy locked in solid. Thanks Rocking J.

[@ericrichards5862]

Hi Randy,
Great project and well executed, I like the captive bolts and the fixed angle adjustments for the vise.
Another eight bolt holes and you could adjust to 22.5 degrees.

[@RRINTHESHOP]

Thanks Eric. I thought about that, maybe later.

[@AJR2208]

G'Day Randy - She's looking very good, Well Done!
I put a wheel hub onto my table to make it rotate - They're cheap and easy to get and are already built for heavy loading. I'm just a bit shy about hammering on it in case I hurt the bearings.

[@RRINTHESHOP]

Good idea Anthony. I don't hammer on this table. Thanks.

[@christophernewton2579]

I like your knocker what good idea no more lead particles flying around.

[@RRINTHESHOP]

Works great I use it all the time. Thanks Christopher.

[@pearcemachineshop5200]

Looks great Randy, you put some thought in to that nice job.
Al.

[@RRINTHESHOP]

Thank you Pearce. Works great.

[@chrisstephens6673]

@@RRINTHESHOP bit formal there Randy, his name is Al.😕

[@RRINTHESHOP]

@@chrisstephens6673 I must not scrolled and I missed that. Thanks Chris.

[@hilltopmachineworks2131]

Next project make some sort of removable fence?

[@RRINTHESHOP]

That is a possibility. Thanks Tom.

[@carlwhite8225]

Randy, Love it and am so making one of those. Thanks.

[@RRINTHESHOP]

Great project Carl. Thanks for the visit.

[@nikond90ful1]

Thanks for the video.

[@RRINTHESHOP]

Thanks Colin.

[@Chromevulcan]

So without going through 2 years of comments, did you post the DTI holder plans anywhere?

[@RRINTHESHOP]

send me an email: [e-mail]

[@JourneymanRandy]

Nicely done also I might have to get 3D printer. Did you say you the file to print the CXA?

[@RRINTHESHOP]

I downloaded the files to Patreon. Thanks Randy.

[@woodscreekworkshop9939]

You keep mounting things to it, you’ll need a bigger table top 🤗

[@RRINTHESHOP]

Yep for sure,, no room for a larger table right now. Thanks Yuchol.

[@YourOldDog]

Just a heads up. Your audio will sound better the closer your mic is to your chin. It has to do with a thing called the microphone proximity effect. Your voice will have more character.

[@RRINTHESHOP]

Thanks for the help with this.

[@johnleake708]

Could you have reversed the lathe chuck jaws to reduce the hazards?

[@RRINTHESHOP]

The jaws are not reversible on this chuck John. Thanks.

[@sharkrivermachine]

Nicely done!

[@RRINTHESHOP]

Thanks you Steven.

[@mikenixon9164]

Nice job.

[@RRINTHESHOP]

Thank you Mike.

[@outsidescrewball]

Great video so much information/tips shared along with an awesome build

[@RRINTHESHOP]

Thank you Chuck. See you next week.

[@1970chevelle396]

That turned out great.

[@RRINTHESHOP]

Thanks Ken. I love it.

[@pgs8597]

G’day Randy. The table came out nice, one day you’ll fit folding wings for bigger jobs:). I like how you locked the vice in the angled position, nothing worst than a vice that moves when your working on something.
Cheers
Peter

[@RRINTHESHOP]

Thanks Peter. Works great.

[@metalworksmachineshop]

Very nice. Be careful, you make it to nice and you won't want to get it dirty.

[@RRINTHESHOP]

For sure there Doug. Thanks.

[@OldIronMachineWorks]

Very nice Randy

[@RRINTHESHOP]

Thank you Gary.

[@Rustinox]

That's handy.

[@RRINTHESHOP]

For sure. Thanks Michel.

[@kimber1958]

Hay RR

[@RRINTHESHOP]

Hey Kimber. Thanks for watching.

[@RagsdaleCreek]

Nice job Randy!

[@RRINTHESHOP]

Thank You Anthony.

[@terrycannon570]

I love it. Thanks

[@RRINTHESHOP]

Thank you Terry.

[@davep8462]

late to the party, but this is great ! I will re replicating. for a vise and turntable.

[@RRINTHESHOP]

Works great, thanks

[@bcbloc02]

Nicely done! You get enough stuff mounted on that top you will need a jack to be able to flip it up and down. LOL

[@RRINTHESHOP]

Thanks Brian. No, swings so easy and smooth.

[@barrygerbracht5077]

That would double as a drafting table if you covered the holes LOL.

[@RRINTHESHOP]

LOL, Lots of holes. Thanks Barry. Does drawing on it with a sharpie count.

[@barrygerbracht5077]

@@RRINTHESHOP Of course it does. 😁

[@TimothyGack]

This whole welding table project has been really cool to watch. Thanks for sharing.

[@RRINTHESHOP]

Thank you Tim. Time for some new projects. Works great I am using it all the time for all sorts of things.

[@ScoutCrafter]

Incredible design, so many possibilities and uses! Thanks Randy!

[@RRINTHESHOP]

Thank you Scout. Works great.

[@CruiserMac]

Nice job Randy, I have been thinking of building a welding table like that. I have a vise to mount on it as well ...hmmmmm.

[@RRINTHESHOP]

Thanks Mac. This table is working out great.

[@chrisstephens6673]

Thank goodness i don't do much, if any, welding, my Tu-it list is long enough already. Otherwise i might have had to copy you.👍

[@RRINTHESHOP]

Thank you Chris, so far I have used it for more non welding projects.

[@CraigLYoung]

Morning Randy! Nice Mod! Going to have to seriously start thinking about building myself one of those.

[@RRINTHESHOP]

Morning Craig. This works pretty slick, love the table.

[@glennfelpel9785]

Thank you for the idea on the indicator holder arm, never thought of doing that. Good one Randy.

[@RRINTHESHOP]

Works great use it all the time. Thanks Glenn.