Carbon barrels build up heat fast because of the very thin steel bore, and trap it under the carbon wrap. Quality steel barrels that are stress relieved don’t walk after heating up and more durable than carbon fiber barrels. To each his own! I have half dozen or more savages and they all shoot but I have really grown to hate that trigger.
Not to mention the enormous n thick 110 action. Idk why savage hasn't made a better lighter action for there top tier. They just slap a good barrel an stock on that stupid action then charge a premium for it. The savage are OK but I'd buy a howa over the savage every time
Awesome choice. I did a shit ton of research when i made my decision. I chose the 6.5prc. Allot more punch little bit more recoil. And a titanium break. Its very mild I chose the same rifle scope as well. Kinda funny how it worked. Got my first speed goat with this set up.
I just built a firearm for this purpose. Here’s the recipe Defiance Anti LA Mag 1360 Proof CF 7mm Rem Mag 752 Red Hawk BDL bottom metal. 208 TriggerTech set @ 1.5 lbs 175 Mess Altitude CF stock 575 It’s weighing at 6.2 lbs. for the rifle. Add Arken rings @ 65 and a Leupold VX 5 HD 3-15x44 @ 900 Arca rail 95 $4135 invested. Scoped and out the door weight is 7.75 lbs. Ok as to money here’s my learning curve. Buy a factory gun- upgrade stock then trigger then have action squared and upgrade barrel. Now you’re accumulated the same financial outlay but you STILL have a factory action. With most custom actions the tolerances are so tight that barrel makers can build pre fit barrels that will headspace perfectly. This means you don’t have to pay for an action job at around $250 and a gunsmith $400 to cut your chamber and threads and headspace it. Because once you’re opened the factory threads by recutting them you can no longer use prefits. You’ve just locked yourself into the gunsmith route forever. Here’s where you save money- on your next caliber. You don’t have to buy an entire another gun you simply buy another prefit barrel in another caliber. It takes 5 minutes to swap out barrels and you are still shooting the same setup you’re used to with the first caliber. My next caliber will be the 6.5 PRC and the gun will be the same components with just a different caliber. Now you don’t need 2 actions, stocks, triggers and bottom metal, scopes and rings. I watch for the annual sales and will grab a Proof barrel at about $750 So now I’m still a one gun guy. Just two barrels! That’s not cheating right? The heart of this build is the Defiance Anti as it only weighs 23 ounces which is a full 13 less than most custom actions out there. The CF barrel shaves a pound as does the CF stock. I put it together in my garage with a barrel vice, action wrench and headspace gages.
Nice choice in rifles. I have used a Savage 110FP Tactical Police .308 for many years and I plan on picking up the Ultralite version for mountain hunts. The tactical version is a heavy platform.
Great video, I was doing the same myself this year. I'm late to hunting too, but I've been into firearms way longer so it was just a merging of hobbies. The Savage is a screaming deal, I ended up going custom this time though. Its not the first time I had a rifle built looking for the perfect backcountry gun (live and learn), and I'm really pleased how it came out this time.
Wow. Excellent video. Thank you for taking the time to share with us with your thoughtful, entertaining and practical video. You poured a lot of great info into a short period of time. I dig your energy and “easy to listen” communication style. I too think about shaving weight often. Great job on the build. I hope it is as accurate as it is lightweight and “Purdy”. God bless you and your family. Subscribed and 🔔. Thanks!
I’ve been using a Henry big boy x chambered in 44 mag . I want to get a Ranger point precision stock to get the weight down but I’ve hiked many a mile with it alredy and great defender against any animals . It’s also like 3ft long
I also have a Savage 110 Ultralight, but I have mine chambered in .30-06. It is an absolute TACK DRIVER! I set mine up to be a sheep/ backpacking only gun and it turned out perfect. It has a Leupold VX3HD 2.5-8x36 CDS-ZL2 on it mounted using Talley Lightweight Alloy Mounts. I replaced the stock with a Boyd’s Spike Camp stock that I bedded the action into and also bedded a Spartan Precision Javelin Bipod Gunsmith adapter right in from of the front action screw. I am using an Area 419 Sidewinder brake on it while my silencer is in jail. With the brake on it, it weighs 7 lbs. 10 oz. Some people may wonder why would I put a “heavier” laminated wood stock on it. Yes; it gained 3 ounces by putting the Boyd’s Spike Camp stock on it, but the rigidity and ergonomics are so worth it. I am so happy with how it turned out for me and I hope you enjoy yours as much as I do with mine.
Nice set up! I have a very similar set up, I went with a savage ultra light in 280ai with a Athlon midas tac 4-16x44. Only thing I changed was the stock I put a bell and Carlson stock on it and it shoots incredible!
I just picked up one of these outstanding rifles. When I matched it with Hornady 308, 178 grain ELDX its sub MOA and its still super accurate with a cold bore. Carrying it into the backcountry was a night and day difference to the classic Winchester model 70. I think I came in with a 40% weight reduction for the whole system, but an absurd improvement in capabilities. I also used the DNZ mount to put a Vortex Viper on it. Put it all together for less than $2000
Ruger American standard 6.5cm Lipsey's distributor, Vortex Venom with Vortex 1.1 rings, AD arms billet cocking piece, foam pads with vet tape for the cheek. I haven't weighed the rig, but I'm somewhere in $1,000 - $1,200 in total roughly.
I bought that 110 ultra light for the same reasons. But I got it in 3006 I put a bergara muzzle break on it to help with the recoil because I hand loaded it shooting just a bit under 3100 FPS. It’s shooting 1/2 3/4 Moa out to 600. Groups don’t open up because of heat till the 5th consecutive shot Good video!!!!!
4.5-22x50 is crazy are you hunting or shooting wood chucks. Perfect back county rifle is a savage axis xt, Leupold FX-3 6x42, mcarbo spring kit, burris z rings. under 7.5 lbs
When you started, I was thinking just get a Savage Ultralite. I have two, both with Leupold 2-10 vx5 cds- 2. I find 10x is plenty for hunting distances. You know the screw size for the mounts has to be 8-40 I think, different from a regular 110? I used Leupold Backcountry 2 piece mounts, worked perfectly, very lightweight. Love the rifles, good luck with yours!
Thanks! Yes, DNZ had very helpful info before I ordered to make sure I got the 8-40 since the Ultralite is different. Glad to hear you're loving yours...I can't wait to get everything mounted up and take her out to the range!
A backcountry rifle needs a quality hunting scope not a monstrous target scope that maxes out @ no more than12 power with a 40mm obj to keep things compact and lite.
Good morning! What’s the price you got for the rifle? I’m thinking about going with the same rifle and scope. Just wondering on the cost of each. Maybe I should wait for the end of hunting season to get a good deal on each. 😀
@@southbaygladiator7748the bullets from both cartrigdes always penetrate while giving good expansion. The extra energy of the 300 WSM is just not contributing to faster killing, and the animal can not become deader than dead.
Just got into the Spotify podcasts and i had a question and haven't seen much on it but what are good ways to get outta work to go hunting lol i know it sounds bad but i noticed you had mentioned that you use hunting for mental health and iv been struggling last few years to get the time to put into getting an animal and its super annoying
How do you hunt with a brake? Are you forced to quickly put on hearing protection before the shot? I have shot a brake a couple of times without hearing protection while hunting and am still paying for it. Looking for a good option for quick ear protection while hunting. What if you jump a buck or elk?
Honestly, it's a risk I run. I typically keep those ear plugs with the hard plastic "collar" around my neck. Then, in theory, it's just 5 extra seconds to put them in place. If I jump something, I'm just gonna mess up my hearing. That being said, obviously all calibers are not created equal when it comes to volume. I've been around a 6.5 Creedmoor with a brake without hearing protection several times and it wasn't even an issue...the .300 WSM on the other hand would be felt for a long time.
Been hunting for over 50 years now and no animal has ever been worth damaging my hearing! None! Thankfully my hearing is still good, despite a lot of unprotected shotgunning as a dumb kid! No way I’d shoot a rifle without hearing protection, the exception being a surprise bear or cat attack!
@@elkhuntr2816 Peltor makes some tri-flange rubber ear plugs that are really quick to employ. Been using them lately. Lightweight, comfortable and quick to use. www.amazon.com/Peltor-Tri-Flange-Corded-Reusable-Earplugs/dp/B000DZF7T6?pd_rd_w=Z13Bn&content-id=amzn1.sym.47078f0f-6136-43d7-a63f-08b5e29bec55&pf_rd_p=47078f0f-6136-43d7-a63f-08b5e29bec55&pf_rd_r=QSEHWGZZYBFVAWREBZWZ&pd_rd_wg=Ebu2M&pd_rd_r=a7810c57-0447-4ce6-b8a1-2eece4157cb1&pd_rd_i=B000DZF7T6&ref_=pd_bap_d_grid_rp_0_1_ec_i&th=1
This topic is much to do about nothing. I built custom Rifles they should great you get exactly what you want but they get pretty expensive. Get yourself a waypoint 2020 or a Christian Arms, Ridgeline, or MPR they both shoot more accurate than the average Hunter can capable beyond 1000 yards
Carbon barrels build up heat fast because of the very thin steel bore, and trap it under the carbon wrap. Quality steel barrels that are stress relieved don’t walk after heating up and more durable than carbon fiber barrels. To each his own! I have half dozen or more savages and they all shoot but I have really grown to hate that trigger.
Not to mention the enormous n thick 110 action. Idk why savage hasn't made a better lighter action for there top tier. They just slap a good barrel an stock on that stupid action then charge a premium for it. The savage are OK but I'd buy a howa over the savage every time
6.5 Creedmoor is an amazing cartridge. I limit out every year with it here in Texas on Velociraptors.
Awesome choice. I did a shit ton of research when i made my decision.
I chose the 6.5prc. Allot more punch little bit more recoil. And a titanium break. Its very mild
I chose the same rifle scope as well. Kinda funny how it worked. Got my first speed goat with this set up.
Just found your channel. Just started hunting deer in Australia with a 243 to start with at age 40 and loving it. Cheers
I just built a firearm for this purpose. Here’s the recipe
Defiance Anti LA Mag 1360
Proof CF 7mm Rem Mag 752
Red Hawk BDL bottom metal. 208
TriggerTech set @ 1.5 lbs 175
Mess Altitude CF stock 575
It’s weighing at 6.2 lbs. for the rifle.
Add Arken rings @ 65 and a Leupold VX 5 HD 3-15x44 @ 900
Arca rail 95
$4135 invested. Scoped and out the door weight is 7.75 lbs.
Ok as to money here’s my learning curve. Buy a factory gun- upgrade stock then trigger then have action squared and upgrade barrel. Now you’re accumulated the same financial outlay but you STILL have a factory action.
With most custom actions the tolerances are so tight that barrel makers can build pre fit barrels that will headspace perfectly. This means you don’t have to pay for an action job at around $250 and a gunsmith $400 to cut your chamber and threads and headspace it. Because once you’re opened the factory threads by recutting them you can no longer use prefits. You’ve just locked yourself into the gunsmith route forever.
Here’s where you save money- on your next caliber. You don’t have to buy an entire another gun you simply buy another prefit barrel in another caliber. It takes 5 minutes to swap out barrels and you are still shooting the same setup you’re used to with the first caliber.
My next caliber will be the 6.5 PRC and the gun will be the same components with just a different caliber.
Now you don’t need 2 actions, stocks, triggers and bottom metal, scopes and rings. I watch for the annual sales and will grab a Proof barrel at about $750
So now I’m still a one gun guy. Just two barrels! That’s not cheating right?
The heart of this build is the Defiance Anti as it only weighs 23 ounces which is a full 13 less than most custom actions out there. The CF barrel shaves a pound as does the CF stock.
I put it together in my garage with a barrel vice, action wrench and headspace gages.
DNZ are my favorite scope rings, have been for years.
Nice choice in rifles. I have used a Savage 110FP Tactical Police .308 for many years and I plan on picking up the Ultralite version for mountain hunts. The tactical version is a heavy platform.
Great video, I was doing the same myself this year. I'm late to hunting too, but I've been into firearms way longer so it was just a merging of hobbies. The Savage is a screaming deal, I ended up going custom this time though. Its not the first time I had a rifle built looking for the perfect backcountry gun (live and learn), and I'm really pleased how it came out this time.
Nice shirt I have the same one. I also am recoil shy went from 30-06 to 308 with a muzzle break. Now I can stay behind the gun and see my impact.
Wow. Excellent video. Thank you for taking the time to share with us with your thoughtful, entertaining and practical video. You poured a lot of great info into a short period of time. I dig your energy and “easy to listen” communication style. I too think about shaving weight often. Great job on the build. I hope it is as accurate as it is lightweight and “Purdy”. God bless you and your family.
Subscribed and 🔔. Thanks!
Thats probably the greatest shirt I’ve ever seen!!!! 🔥🔥🔥
I’ve been using a Henry big boy x chambered in 44 mag . I want to get a Ranger point precision stock to get the weight down but I’ve hiked many a mile with it alredy and great defender against any animals . It’s also like 3ft long
I also have a Savage 110 Ultralight, but I have mine chambered in .30-06. It is an absolute TACK DRIVER! I set mine up to be a sheep/ backpacking only gun and it turned out perfect.
It has a Leupold VX3HD 2.5-8x36 CDS-ZL2 on it mounted using Talley Lightweight Alloy Mounts. I replaced the stock with a Boyd’s Spike Camp stock that I bedded the action into and also bedded a Spartan Precision Javelin Bipod Gunsmith adapter right in from of the front action screw. I am using an Area 419 Sidewinder brake on it while my silencer is in jail. With the brake on it, it weighs 7 lbs. 10 oz.
Some people may wonder why would I put a “heavier” laminated wood stock on it. Yes; it gained 3 ounces by putting the Boyd’s Spike Camp stock on it, but the rigidity and ergonomics are so worth it.
I am so happy with how it turned out for me and I hope you enjoy yours as much as I do with mine.
Nice set up! I have a very similar set up, I went with a savage ultra light in 280ai with a Athlon midas tac 4-16x44. Only thing I changed was the stock I put a bell and Carlson stock on it and it shoots incredible!
Hi-- where do you get your ammo? Thanks from Wyoming
I just picked up one of these outstanding rifles. When I matched it with Hornady 308, 178 grain ELDX its sub MOA and its still super accurate with a cold bore.
Carrying it into the backcountry was a night and day difference to the classic Winchester model 70. I think I came in with a 40% weight reduction for the whole system, but an absurd improvement in capabilities.
I also used the DNZ mount to put a Vortex Viper on it.
Put it all together for less than $2000
Oh man, that's awesome to hear! That Vortex Viper on my Winchester never let me down...great scope!
Ruger American standard 6.5cm Lipsey's distributor, Vortex Venom with Vortex 1.1 rings, AD arms billet cocking piece, foam pads with vet tape for the cheek. I haven't weighed the rig, but I'm somewhere in $1,000 - $1,200 in total roughly.
I bought that 110 ultra light for the same reasons. But I got it in 3006 I put a bergara muzzle break on it to help with the recoil because I hand loaded it shooting just a bit under 3100 FPS. It’s shooting 1/2 3/4 Moa out to 600. Groups don’t open up because of heat till the 5th consecutive shot Good video!!!!!
How’s the recoil with the break?
@@NastysoapDish90 less than my 308 without a brake
Lol deep in the backcountry. I’ll hit the subscribe button now
I knew 6.5 in model 70 featherweight would be a great choice , that’s what I got a few months ago
plenty of factory offerings that provide what you say you need like the tikka 3X
4.5-22x50 is crazy are you hunting or shooting wood chucks.
Perfect back county rifle is a savage axis xt, Leupold FX-3 6x42, mcarbo spring kit, burris z rings. under 7.5 lbs
When you started, I was thinking just get a Savage Ultralite. I have two, both with Leupold 2-10 vx5 cds- 2. I find 10x is plenty for hunting distances. You know the screw size for the mounts has to be 8-40 I think, different from a regular 110? I used Leupold Backcountry 2 piece mounts, worked perfectly, very lightweight. Love the rifles, good luck with yours!
Thanks! Yes, DNZ had very helpful info before I ordered to make sure I got the 8-40 since the Ultralite is different. Glad to hear you're loving yours...I can't wait to get everything mounted up and take her out to the range!
Great!
A backcountry rifle needs a quality hunting scope not a monstrous target scope that maxes out @ no more than12 power with a 40mm obj to keep things compact and lite.
Psyched to see how this works out for you buddy!
Thanks man...I can't wait to sling some lead out of it for the first time!
Good morning! What’s the price you got for the rifle? I’m thinking about going with the same rifle and scope. Just wondering on the cost of each. Maybe I should wait for the end of hunting season to get a good deal on each. 😀
Hey where did you get that tee shirt?
MeatEater
This is the best video I have ever seen good content
I used the 300 WSM a while hunting reindeer. It does not kill better than the 6.5x55 so I went back to the 6.5. Your 6.5 CM will do very well.
How does a 300 not kill better than a 6.5? I’m truly not understanding the math of this statement.
Try that 6.5 on a brown bear
@@southbaygladiator7748the bullets from both cartrigdes always penetrate while giving good expansion. The extra energy of the 300 WSM is just not contributing to faster killing, and the animal can not become deader than dead.
Just got into the Spotify podcasts and i had a question and haven't seen much on it but what are good ways to get outta work to go hunting lol i know it sounds bad but i noticed you had mentioned that you use hunting for mental health and iv been struggling last few years to get the time to put into getting an animal and its super annoying
Get a McMillans hunter edge for your Winchester and find a lighter scope it’ll save you about 2 pounds
How do you hunt with a brake? Are you forced to quickly put on hearing protection before the shot? I have shot a brake a couple of times without hearing protection while hunting and am still paying for it. Looking for a good option for quick ear protection while hunting. What if you jump a buck or elk?
Honestly, it's a risk I run. I typically keep those ear plugs with the hard plastic "collar" around my neck. Then, in theory, it's just 5 extra seconds to put them in place. If I jump something, I'm just gonna mess up my hearing. That being said, obviously all calibers are not created equal when it comes to volume. I've been around a 6.5 Creedmoor with a brake without hearing protection several times and it wasn't even an issue...the .300 WSM on the other hand would be felt for a long time.
Been hunting for over 50 years now and no animal has ever been worth damaging my hearing! None! Thankfully my hearing is still good, despite a lot of unprotected shotgunning as a dumb kid! No way I’d shoot a rifle without hearing protection, the exception being a surprise bear or cat attack!
@@58harwood So how do you do it while hunting? Earplugs around the neck?
@@elkhuntr2816 Peltor makes some tri-flange rubber ear plugs that are really quick to employ. Been using them lately. Lightweight, comfortable and quick to use. www.amazon.com/Peltor-Tri-Flange-Corded-Reusable-Earplugs/dp/B000DZF7T6?pd_rd_w=Z13Bn&content-id=amzn1.sym.47078f0f-6136-43d7-a63f-08b5e29bec55&pf_rd_p=47078f0f-6136-43d7-a63f-08b5e29bec55&pf_rd_r=QSEHWGZZYBFVAWREBZWZ&pd_rd_wg=Ebu2M&pd_rd_r=a7810c57-0447-4ce6-b8a1-2eece4157cb1&pd_rd_i=B000DZF7T6&ref_=pd_bap_d_grid_rp_0_1_ec_i&th=1
My selections are different but we all have to like something different or it would be a boring world.
Vortex made in China
Not all Vortex are. The Razor HD LHT is made in Japan!
My bow is a bit lighter than your new Savage, and I can still take down a deer from 50 yards away.
This topic is much to do about nothing. I built custom Rifles they should great you get exactly what you want but they get pretty expensive. Get yourself a waypoint 2020 or a Christian Arms, Ridgeline, or MPR they both shoot more accurate than the average Hunter can capable beyond 1000 yards