Thanks we had quite a bit of fun with the 8.6blk. With Factory seconds SMK 300gr, and A1680 it’s fairly inexpensive to shoot. Due to the ridiculous fast twist rate I’d stick with bonded or monolithic. Thanks for watching
Put my round together, ar 10 platform, hammer bullets' 285gr copper hollow point, 16gr accurate 1680, wlr primee, CoL 2.71in. Quite accurate sounds great through an Omega 36m. MV 1040 fps, SD 12 fps, with mixes head stamp converted 6.5 cm brass.
Good question. Are you referring to the max rated pressure, or the pressure generated by a certain load/ammo. Info around the 8.6 has been hard to find. Some of the first published load data was extremely sketchy. Thanks for watching
I've been looking for someone who has loaded these TTSX 185GR. FINALLY :) I want to load them my self. What was your COAL for the TTSX 185GR?? Thanks for the info! I am subbing for sure!
Yeah very limited data available for 8.6blk. Back when I first got ahold of it there wasn’t even preliminary data available. When I did this video there was finally some data out there. . The 8.6blk has been fun. Ballistic Advantage is coming out with a 1 in 5 twist barrel, and I feel it will be much more forgiving. I may even try to see about doing some load development on jacketed bullets 😝. . Thanks for watching I appreciate you very much.
Very informative, and no BS. Thanks. Greatly appreciate your efforts and your sharing
Thanks we had quite a bit of fun with the 8.6blk. With Factory seconds SMK 300gr, and A1680 it’s fairly inexpensive to shoot. Due to the ridiculous fast twist rate I’d stick with bonded or monolithic. Thanks for watching
Put my round together, ar 10 platform, hammer bullets' 285gr copper hollow point, 16gr accurate 1680, wlr primee, CoL 2.71in. Quite accurate sounds great through an Omega 36m. MV 1040 fps, SD 12 fps, with mixes head stamp converted 6.5 cm brass.
Great content dude! Subbed from Alaska!
Thanks. I appreciate it. The only bad thing about 8.6blk is finding factory ammo 😝
Good information, Thanks from Texas !!!
Appreciate it. It’s been fun. Have been having great success using Hornady 6.5cm brass, Accurate 1680 , and SMK 300gr!
Great info question would you happen to know the chamber pressure of 8.6 blackout
Good question. Are you referring to the max rated pressure, or the pressure generated by a certain load/ammo. Info around the 8.6 has been hard to find. Some of the first published load data was extremely sketchy. Thanks for watching
Nice 62k noted. I appreciate that. Most of my QL data came out to much under, and operated well.
I've been looking for someone who has loaded these TTSX 185GR. FINALLY :) I want to load them my self. What was your COAL for the TTSX 185GR?? Thanks for the info! I am subbing for sure!
great video may i ask the COAL you used on the 185 ttsx
Thanks. I found them at 2.700” to function, and group best in my setup.
I have Barnes 160gr TTX, can't find load Dara on that?
Yeah very limited data available for 8.6blk. Back when I first got ahold of it there wasn’t even preliminary data available. When I did this video there was finally some data out there.
.
The 8.6blk has been fun. Ballistic Advantage is coming out with a 1 in 5 twist barrel, and I feel it will be much more forgiving. I may even try to see about doing some load development on jacketed bullets 😝.
.
Thanks for watching I appreciate you very much.
I have been considering a 1/5 twist 300blkout barrel. It supposedly has the same issue has the 8.6 1/3 but the energy is way greater than the 1/7
Is this 16” barrel fps or 12”?
16”
That grip, though. I feel for ya, man. Emasculating state gun laws aside, nice vid.
I was going to go fixed Mag with the JT hellfighter button, but at $75 per rifle it’s ridiculous.
Wearing sunglasses indoors 🙄
As a beekeeper I still get swelling in the face especially the eyes 😂