How to Make DD Coil for Metal Detector Admiral

One note: After shielding the coils is better to cover with duct tape.
Ebay Store - www.ebay.com/u...
PCB for Metal Detector Admiral-Classic - www.ebay.com/i...
MD Admiral Two Tones Kit - www.ebay.com/i...
Searching Coil Housing 11 inch DD Shell - www.ebay.com/i...
Searching Coil Housing Shell 12x10 inches SEF - www.ebay.com/i...

[@the_underworld19]

Спасибо большое 🌹 Это творчество

[@HoBByTV_The_King_Detectors]

Спасибо, надеюсь было полезно

[@edwardholappa8410]

Are there any electronics on the wire, is it soldered to a diode or does it go directly from the coil to the electronics box where you click on the device

[@HoBByTV_The_King_Detectors]

just wires and about Garrett ATX I guest you can make it but you have to know data of the coils.i'm not familiar with this coil. Greetings

[@hakanylmaz8052]

Hello, how many turns do I need to wrap with 0.40mm cable for tx?

[@HoBByTV_The_King_Detectors]

Depends what size you will make must be calculated. For this as long as I remember 50-55 turns. Greetings

[@hakanylmaz8052]

@@HoBByTV_The_King_Detectors Thanks bro, it works fine

[@trkbellikli]

Dear Boril, its good to see that. can you share the schematic. I have pcb with two tone but I want to make it smd

[@HoBByTV_The_King_Detectors]

write to me on Facebook and I will send it to you there

[@trkbellikli]

@@HoBByTV_The_King_Detectors I have write to you on FB

[@mohalmisri1230]

@@HoBByTV_The_King_Detectors me to please 🥺

[@victorsantana4773]

is the copper wire you wrap around the shield enameled or bare? or does it matter?

[@HoBByTV_The_King_Detectors]

Bare wire has to have connections to the shield everywhere for better results

[@mohalmisri1230]

What I mean when connecting the shielding to the cable at one end .

[@mohalmisri1230]

How do I measure the induction in mh using multimeter,I don't have that device

[@HoBByTV_The_King_Detectors]

you need an expensive multimeter or lc meter like mine Mega328 LCR-T4

[@brianbloom1799]

I know nothing about Electronics The only way I can Learn Is by having someone Explaining it to me, Being silent will not work For 70% of people wanting to learn this, To people into electronic,s they will Understand. The rest wont

[@ahmed_ufo]

Hello..Does the Admiral device detect natural gold nuggets?

[@HoBByTV_The_King_Detectors]

Almost every metal detector goes for gold nuggets it depends on the size of gold. Admiral is more like coin shooter. I have found 3-4mm lead pieces with the Admiral.

[@mohalmisri1230]

Mr Boril ,what the oscilloscope has to do with adjustment to the coil ,I didn't understand this part,also is this adjustment exclusive for the admiral coil or we can do this for any other coil with deferent MDs .?
I solved the inductance issue that I found a reasonable DMM to do that but do you have any good idea for a cheap oscilloscope? thanks from Egypt

[@HoBByTV_The_King_Detectors]

www.aliexpress.com/item/32826365689.html?spm=a2g0o.order_list.0.0.14441802u0Dt08

[@Sprinter99800]

You didn't show the most important part which is connecting the starts and Ends.
There are 2 start point and 2 End How do we connect them to the circuit ?

[@HoBByTV_The_King_Detectors]

th-cam.com/video/OnjTM7UxpIs/w-d-xo.html

[@GhaziAlazaby]

كم لفات في كل ملف D

[@HoBByTV_The_King_Detectors]

На видеото се вижда

[@vlogforgolddetector]

Good ideas bro' God bless

[@HoBByTV_The_King_Detectors]

Thank you!!!

[@amelvisespaillat6198]

Necesito que me haga una bobina para la pcb admiral que te compre cuanto sale con el envío?

[@amelvisespaillat6198]

Necesito una bobina para el admiral que te compre en cuanto me sale con el envío?

[@HoBByTV_The_King_Detectors]

Te escribí en eBay

[@amelvisespaillat6198]

@@HoBByTV_The_King_Detectors ok hermano

[@هلافيك-ث5ش]

How deep is this file, my dear brother

[@HoBByTV_The_King_Detectors]

The depth is pretty good 😊

[@amelvisespaillat6198]

Ese alambre es calibre 22mm aquí en República Dominicana no existe el 0.45mm

[@HoBByTV_The_King_Detectors]

for RX you can use from 0.20 to 0.30mm and for TX from 0.40 to 0.50mm. More important induction to be for TX around 1mH and RX can be 7mH to 12mH

[@amelvisespaillat6198]

@@HoBByTV_The_King_Detectors ok cuantas vueltas RX y cuantas vueltas TX?

[@HoBByTV_The_King_Detectors]

120-130 for RX and 45-50 for TX . and one more thing the cable for it must be at least 4 wire shielded.

[@BenyaminLahoory1379]

Friend. Hello my dear. this for. What. metal There is a search. What wire to use? Thank you That. precision Much. you have. thank you. Babe. Answer. give❤❤❤❤

[@HoBByTV_The_King_Detectors]

Hi, friend this search coil is for Admiral the wire that can be use is for TX - 0.40 to 0.50mm and RX 0.20 to 0.30mm. but most important this is the way that most DD coils are making. Greetings

[@rosenborisov2700]

Направи екран с графит,по лесно е,и махни тези букси 5ци които се ползваха 1995година,клещите от соца също ги махни от видеото и кашона,бъди малко по съвременен "майстор"

[@HoBByTV_The_King_Detectors]

Благодаря за съветите колега но не се имам за майстор това ми е хобито и качвам от време на време някое видео ако може да е полезно за някои колега 😉 Поздрави!

[@skymahdi]

مسخره

[@HoBByTV_The_King_Detectors]

Thank you 😂

[@محمدکریمی-ظ6ي]

محمد

[@BAEELaxmanUppar]

Hi bro I want your help ,how to contact you pls brother

[@HoBByTV_The_King_Detectors]

Facebook

[@benignoguerrero2826]

Párese el cine mudo en sus tiempos mi ablas nu que chingao le pusiste ese vídeo no cirve

[@HoBByTV_The_King_Detectors]

Благодаря за съвета, ако обяснявам на моя език (български) ще разбереш ли нещо?