Do zhiyun plan on, or can they have a system that will allow the app to autofocus using the focus servos? I have a d850 which has god awful focus tracking and anything to help with that would be awesome.
No you cannot. This is only compatible with the Zhiyun AI Transmitter. Be very careful you don't do the mistake I did and buy a AI transmitter for the Weebill S as it WILL NOT WORK. The only reason to buy this MasterEye controller is if you have a Weebill 2, AND An AI Transmitter.
Hi I have just purchased the Zhiyun Crane 3s Pro which came with the COV-03 transmitter.. I have the COV-02 Receiver as well as the Remote and would like to sync the COV-03 Transmitter to the COV-02 Receiver. 01) is this possible? I have been trying with no success. I have an Atoms Ninja monitor and don't feel the need to purchase a MasterEye over and above, if this is purposely not an option by Zhiyun, I believe it is a big over site on their behalf as I use a number of different devices with my monitor and would prefer to only have to carry one monitor, so I would look at alternative products and sell the Crane 3s where I am not restricted. I have always gone with Zhiyun because of its functionality and there great compact design, but if I have to carry more equipment than what I require whats the point.
Hi I can’t use my follow focus control dial on my VC100 and I can’t seem to update it to a newer version. There’s no option for firmware on the zhiyun website can anyone help???
Greetings, Does anyone out there have experience with the VC100-Sony FX3 camera function controls? I am hoping the VC100 will control the Weeblii 3s and Sony FX3 via AI Transmitter while the camera rig is mounted to the bumper and the camera operator stationed inside of the vehicle.
I have the masterye , weebill 2 and weebill 2 and I am using SOny A7IV. However, it does nto work as I am not able to control the camera setting when I am using it with any of the gimbal. Any help would be greatly appreciate.
@@WuAhGestudioproduction There total need connect with 3pcs cables, two cables connect the camera with the transmitter: LN-HAHB-A04 and LN-UCUS-A02, and one cable connect the transmitter with the gimbal which with the yellow mark:Type-C to type-C LN-UCUC-A03.
@@JasonVendryes I bought the ninja V last week. I have the weebill s, transmit, and the focus motor. I'm thinking of exchanging the ninja v for the vc100 now. I just wasn't sure if it was compatible thanks.
Hi guys, I hope Ill get answer to my question :D I have problem with masterEye that not all functions are working :/ and everytime when I restart it different ones are working :P only screen and not possible to use anything, or no screen and just recording button and again next time just zoom buttons :O I tried to fix this problem but still nothing. Or is it my camera that is not fully compatible ? I have sony a7iii THANX in advance
Hello , I'm trying to use the Record and Photo Button in my Sony A7MIII , but I don't know why it doesn't work , may you help me ? , I would be so greateful if you could ... Greetings
Hi! For Sony A7M3, 1. Please select "PC Remote" for your camera's "USB Connection". 2. For Sony cameras, after connecting stabilizer and camera with control cable, power on the stabilizer and then the camera. Make sure the camera is fully charged. Please let us know if you have any other questions. Feel free to DM me here: facebook.com/officialzhiyunsupport/
seem to have problem with Motion control mode. (mobile phone app motion control works fine). When using Motion control mode on Mastereye, gimbal still swings to the left, even when mastereye is put on a table. Got the Mastereye replaced, and it now swings to the right, when Mastereye is put on a table with no one touching it. Anyone has any suggestions?
I found out my issue the Gimbal. I reread the manual. When using the Transmitter AI, I failed to read where I had to switch the Gimbal Camera Setting to cca from the camera one. Once I did that I got the controls I was looking for.
@@mattpallotta Yes I did all that and it worked but the focus function didn't work for my Bmpcc 6k pro as the usb port was where my ssd would go and that was what the device wanted to use for camera controls
@@STUDIOJBAph Well it already is, I had exactly the same question and then I took a risk. If you have the Transmitter AI it will work. Because I couldn't find the information anywhere, I just made a video about it
Will had the Focus peak and other focus tools in the next firmware update ???
Do zhiyun plan on, or can they have a system that will allow the app to autofocus using the focus servos? I have a d850 which has god awful focus tracking and anything to help with that would be awesome.
Hi can I use mastereye visual remote control with my weebel S gimbal? I have transmitter for weebel S.
No you cannot. This is only compatible with the Zhiyun AI Transmitter. Be very careful you don't do the mistake I did and buy a AI transmitter for the Weebill S as it WILL NOT WORK. The only reason to buy this MasterEye controller is if you have a Weebill 2, AND An AI Transmitter.
Thanks very much
According to Google it can be used with the Weebill S and the AI transmitter , it better as I've ordered the Zhiyun MasterEye Visual Controller .
I have webill s and first transmitter they work together very well. But webill s with ai transmitter make little problem the Vc 100 works
hey is it posoble to connect only the camera to this rc without using the gimbal???,would be cool to use it as an monitor aswell
all you need is the zhiyun ai transmitter
Hi I have just purchased the Zhiyun Crane 3s Pro which came with the COV-03 transmitter.. I have the COV-02 Receiver as well as the Remote and would like to sync the COV-03 Transmitter to the COV-02 Receiver. 01) is this possible? I have been trying with no success. I have an Atoms Ninja monitor and don't feel the need to purchase a MasterEye over and above, if this is purposely not an option by Zhiyun, I believe it is a big over site on their behalf as I use a number of different devices with my monitor and would prefer to only have to carry one monitor, so I would look at alternative products and sell the Crane 3s where I am not restricted. I have always gone with Zhiyun because of its functionality and there great compact design, but if I have to carry more equipment than what I require whats the point.
Hi, would this remote work with weebil s? Rotation control, focus (CMF), etc?
Did you find out if it does work, if it does, is there are any features that don't work that should?
Yes it works with Weebil S and cmf focus
Hi I can’t use my follow focus control dial on my VC100 and I can’t seem to update it to a newer version. There’s no option for firmware on the zhiyun website can anyone help???
Cannot use the record button on Sony FX30 + Crane4.
Shutter button for pictures works (albeit slowly and unreliably) but record for movies don’t.
anyone have solution to this? Please?
Does it work with a crane 4? and blackmagic 6k pro?
Greetings,
Does anyone out there have experience with the VC100-Sony FX3 camera function controls? I am hoping the VC100 will control the Weeblii 3s and Sony FX3 via AI Transmitter while the camera rig is mounted to the bumper and the camera operator stationed inside of the vehicle.
Can it be used with a cable instead?
will this Visual controller be able to work with the Zhiyun S3 ????
Is it compatible with the Crane 3s?
Yes, you perhaps have to adjust one setting and then the controller is fully compatible with the Crane 3SPro
lag at 3:20 is so beutyfull 🥰
works only with zhiyun gimbals? I have a Moza Aircross 3.
Yes, it only can work with Zhiyun devices.
Hi. I can’t use motion control, F1 mode, ve gimbal modes. Can you help me?
Can you give zhine smouth Q2 foor revieu
Hello! Is this controller compatible with crane 3 Lab?
VC100 can't work with Crane 3 LAB.
i wanted clean hdmi out from this reciever so that i could. connect it to switcher
I need that too. Is it possible or is it possible to catch it and view it on PC so I can send clean hmdi to switcher?
I have the masterye , weebill 2 and weebill 2 and I am using SOny A7IV. However, it does nto work as I am not able to control the camera setting when I am using it with any of the gimbal. Any help would be greatly appreciate.
Did you connect with the AI transmitter also?
@@HellenLee-yz2oj yes.
Tried msny different cables too
@@WuAhGestudioproduction There total need connect with 3pcs cables, two cables connect the camera with the transmitter: LN-HAHB-A04 and LN-UCUS-A02, and one cable connect the transmitter with the gimbal which with the yellow mark:Type-C to type-C LN-UCUC-A03.
Is there any Hdmi out port?
Nope :(
Hello! Is this controller compatible with other gimbals than Webill 2 Pro?
Just got a MasterEye this week. Works with my Weebill S
@@JasonVendryes I bought the ninja V last week. I have the weebill s, transmit, and the focus motor. I'm thinking of exchanging the ninja v for the vc100 now. I just wasn't sure if it was compatible thanks.
Hi guys, I hope Ill get answer to my question :D
I have problem with masterEye that not all functions are working :/
and everytime when I restart it different ones are working :P
only screen and not possible to use anything, or no screen and just recording button and again next time just zoom buttons :O
I tried to fix this problem but still nothing.
Or is it my camera that is not fully compatible ? I have sony a7iii
THANX in advance
Can I use this to switch between two crane gimbals?
if want to switch between two gimbals, you need have two image transmitters, and need to make the reconnection.
I have a question, how changed the sensitivity from the control ?
Single press ISO Button to enter sensitivity parameter settings, then rotate the quick adjustment wheel to adjust sensitivity parameters. :)
Hello , I'm trying to use the Record and Photo Button in my Sony A7MIII , but I don't know why it doesn't work , may you help me ? , I would be so greateful if you could ... Greetings
Hi! For Sony A7M3,
1. Please select "PC Remote" for your camera's "USB Connection".
2. For Sony cameras, after connecting stabilizer and camera with control cable, power on the stabilizer and then the camera. Make sure the camera is fully charged.
Please let us know if you have any other questions. Feel free to DM me here: facebook.com/officialzhiyunsupport/
It´s compatible with Panasinoc Lumix DMC G7?
Doesn't compatible with Panasonic Lumix DMC G7.
seem to have problem with Motion control mode. (mobile phone app motion control works fine). When using Motion control mode on Mastereye, gimbal still swings to the left, even when mastereye is put on a table. Got the Mastereye replaced, and it now swings to the right, when Mastereye is put on a table with no one touching it.
Anyone has any suggestions?
Hi i bought MasterEye but it don't record on SDcard.
You need to get the image transmission first, then press the F2 button to turn on the Screen Record.
No HDMI out?
Nope
Would this work with Crane 3s?
I have a Crane 3. not everything works for me. Focus, zoom, and joystick do not seem to work. Or at least I can't figure out why.
@@mattpallotta O yes I had to return it too it didn’t work as expected with my crane 3s
@@heznadastudios Glad you did that. I think I am just outside the window for returns.
I found out my issue the Gimbal. I reread the manual. When using the Transmitter AI, I failed to read where I had to switch the Gimbal Camera Setting to cca from the camera one. Once I did that I got the controls I was looking for.
@@mattpallotta Yes I did all that and it worked but the focus function didn't work for my Bmpcc 6k pro as the usb port was where my ssd would go and that was what the device wanted to use for camera controls
Hi. Does the Mastereye VC100 work with Weebill S? I have the COV-01 transmitter. Thanks.
works with my Weebill S
Yes, Mastereye VC 100 can work for Weebill S, Weebill 2 and Weebill 3
Why is the video so laggy?
Video Signal"
👍🇹🇭🇹🇭🇹🇭🇹🇭👍🙎♂️🙏
Will this work with the Weebill S ?
I only know that the VC100 can work with CRANE 3 Lab/WB3/Crane 3S.
It works with webill s. I have one
It work with the weebills, but it need connect the camera which in the compatible list of weebills and Zhiyun transmitter.
Does this work with the Crane 3S?
Hi David. No it can't work with C3S.
@@ZhiyunTechGlobal Will it ever be compatible?
@@STUDIOJBAph Well it already is, I had exactly the same question and then I took a risk. If you have the Transmitter AI it will work. Because I couldn't find the information anywhere, I just made a video about it
@@deadendboredom oh great, I was hoping to use the joystick!
@@deadendboredom freaking awesome dude thanks!