This is my first gimbal and admittedly I watched this video probably 10 times just to finally understand it all. Thank you for taking the time to make such a clear walk-through for all us folks at home! I wish there was a short tutorial on understanding the customizations to the values for panning, tilting etc. Thanks again!!
Thank you from germany. I've seen this tutorial just before i buy this gimbal for to use it with my Lumix s5 camera. The sling is what i love, gives me more stability. One point i don' t like much is the only chinese or english version,because for me it' s not so easy to understand all advices. Better solution has the DJI rs3mini, it " speaks" german. But in my home country zhiyun is much cheaper so i try to complete my bad english...😊
Amazing video man! I was getting frustrated with all the other unboxing out there and when I landed on your channel… amazing 🤩 Well done! Much appreciated 🍻
Thank you very much for your very detailed video. I just purchased my Zhiyun Weebill 3S gimbal. Thanks to your video I feel more confident decision purchasing this product. I can't wait to view more of your videos.
Thanks for the very informative video. I replaced my crane M3 with weebil 3s and was having trouble figuring out how to set it up, but now I have a solution. I am a Japanese who is not very good at English, but your pronunciation was very easy to listen to and understand. Thank you for your high quality instructional videos.
Busqué este video en español pero está tan bien hecho que pude entenderlo en inglés sin ningún problema, y me ayudó bastante a usar mi primer gimbal. Muchas graciassss, saludos desde Perú
Brand new to video and just bought the Weebill 3S. This was a great tutorial! Thank you so much for putting it together. I don't know what I would have done had I not found you!
This was the video I was looking for! Straight to the point, easily explained, and simple steps. In the end, it worked! My Weebill S3 gimbal is working! Thank you so much. You sir have just earned a subscriber
Greetings, me again. I had a question: I started using my gimbal in L mode, and after about 10-20 of seconds using it, it beeps a few times and says Axis Lock on the small screen with a lock symbol. And then it stops balancing my Canon EOS R 50mm. Do you know what this means? Is there a way to avoid it? I found that the only way to get rid of it is to turn off and turn on the gimbal again. Also for some reason, on my gimbal screen, the mode is written much smaller. In your video its right in the center with big letters but in mine its on the top left corner and in the center of the screen it says Av N/A. I have no idea what those mean.
@@berkkarsi hi there. Usually when that happens is because one of your axis is actually locked. Make sure you unlock all the motors. Another reason may be because your camera is not properly balanced or it is just too heavy for this gimbal. Hope it helps. Ciao
@@MamoAir already subscribed. Btw, i had to contact Zhiyun because pressing the shutter button didn't start recording. Apparently the button has to be firmly pressed and a bit deeper. Wanted to share that information.
very complet . i saw lot of tutorias and they dont explain as much as you . i just get the gymbal and follow all your instructions steep by steep and works great ! Thanks bro ! Saludos desde argentina , el culo del mundo. ! VLLC !!!
Thank you so much for the video! I do have one question. I would like to use the Shutter button on my Weebil 3S to start and stop recording on my Sony A6700. I have connected my camera through Bluetooth to the gimbal, but the shutter button on the gimbal is not controlling the shutter on the camera. Instead, it looks like it is controlling the focus of my camera. Do you know how I can change this option?
when you have it on pov mode for examble , can you push the trigger button to switch to lock mode for the time that you pushing it , and when releasing it, the trigger button ,can came back at pov mode again autocaticaly ?? You know , for use lock mode just for some seconds and going back at main selected mode instantly ,like Dji s gimbals ... Weebill s doent doing that and i sold it for that !
Hello my friend thanks for the video! I have a question. I use a A7IV + sigma 24-70mm 2.8+ small rig cage. Do I just need to balance it and then auto tune, or do I also need to select the "motor level" to "high" since it is a heavy setup? Thanks for the help!
Hello there. This are things you can try for each setup. If itnis too heavy try with the strong motor. Hope it helps. Subscribe and join my community. Ciao
Thank you very much for the tutorial. You are amazing. The way of presentation, the detailing, and straight to the points without unnecessary bgm or irrelevant subjects. Appreciate it.
at 11:03 When you say find the spot that it stays there... I can't find a spot like that- it always flips forward. Do you know what is wrong? Thank you!
Hello. Thanks for checking the video. If the camera titls forward you have to slide it towards the back of the plate a tiny bit and possobly also lift the side arm a bit lower. I cannot really help without having the gimbal here.. Subscribe for more and join my community. Thanks
@@MamoAir i have a question. Im having trouble with stabilizing in portait mode! When i get to on axis its cool when i place my camera upwards but after that i cant get it to get stabilized :( its like something blocks it
Hello, do you know of any accessories for attaching an external monitor to the Zhiyun WEEBILL 3S? Also, I want to work with a Follow Focus, but I can't find a suitable model.
Hi there. You can use any clamp with magic arm attached or you can check this gimbal th-cam.com/video/FTeoOxvHnOw/w-d-xo.html Hope it helps. Subscribe and join my community. Ciao
Hi, thanks a lot for this great video? For me it´s the first time using a gimbal so your tutorial was extremely helpful! One question about 10:15: Why is it necessary to slide the camera against the side motor?
Hello. Thanks for the message. I place the camera next to the motor because it's a way to keep the whole setup closer to the center of gravity. Hope ut helps. Subscribe and join my community. Ciao
Hi, thanks for this video. Have you found a way to disable joystick panning at all? I like tilting using joystick but not panning. This used to be the case with older gimbals. Thanks!
Hello there. Sorry I have not tried to do so on my gimbal. Try to get in touch with the support team from Zhiyun. Subscribe and join my community. Ciao
@@MamoAir hello.. sure I’ll subscribe.. I also saw your weebill 3E tutorial. Now that you have used both the gimbals, can you tell which one give better performance in stabilisation..??
Great video, was able to assemble it properly. Do you know any carry case for this? I bought the combo pack as well, but the backpack is unusable. Any advice is appreciated.
Very good video, thank you! Is it possible with the gimbel even if my camera display is broken? I always have to mount an additional display on top of the camera and connect it with a cable. would that still work ?
how to do you connect the camera to the gimball? I have a fuji xs-20 and I want to be able to control the camera with the gimbal's buttons and it wont connect.
i have a question look that the camera is using the batery anyways if it says conected and in the icon of the batery of the camera is with a plug at his side. there something im doing wrong ? i put the same configuration that you show in the video
nice review! I don't understand why the weebill 3s start to be a powerbank to my camera sony a7s3 when battery is low... how can i change this setting?
This was a great video! Even tho I don't have an excellent english, thank you! I have a question, can I use any lens if my camera is compatible with the gimbal? like a 18-55mm or a 50mm (canon)
Hello there. Glad I could help. Subscribe and join my community. About the lenses, it depends on their weight and shape. Check the zhiyun website fo compatibility or send them an email. Ciao
What parameters do you recommend for taking videos of walking in the city? I tried a lot, but something just doesn't work. I use F mode. Follows hand right and left too fast and I have to manually adjust up and down, camera doesn't follow hand
Hi, thanks for the comment. The gimbal helps to stabilise the image a bit, then you also have to apply some skills, also in walking. I mever have the perfect shot. Something that does not work for me is to use a gimbal and keep the stabilisation of the camera on too. May be give it a try. Subscribe and join my community. Ciao
At 15:18 you point to a clamp that for vertical tightening, tha freely spins for you. However mine does not freely spin. It hits the main long plate... and I cant work out why. We have the exact same equipment, fitted the same way. The only way I can spin the vertical clamp to loosen it, is to move it all the way up the top of the plate. Any else has this issue?
Hi Mamo good to see you again . i took your Udemy course it actually helps me a lot. this course is also good tutorial for users of Zhiyun 3s . but unfortunately I bought Dji Rs 3, it actually good gimbal but there aren't enough courses so i wish maybe you will update a tutorial course of DJI RS 3 for beginners .
Hello. Thanks for joining my Udemy course, hope it helped. I do no jave partnerships with DJI so I find it more difficult to review for them. Stay tuned anyway. Ciao
If the video helped, HIT SUBSCRIBE and support the channel. Do not be a thief! Join my community. Ciao!
@zhiyun give this man a check he’s the only one on TH-cam with this tutorial! Helped me a lot
Hello there. Thanks for the comment ahah. I hope the video helped. Hit susbscribe then and join my community. Ciao
For me it was the video that make easier my decision 🎉❤
I’ve watched 6 times 😅
@@imdavemtz Thanks for the commnet, glad I could help. Subscribe and join my community. Ciao
@@imdavemtz ahah, awesome
I can’t say thank you enough this is my first gimbal and I would have never in 1000 years figured it out by myself
Hello! I am happy I could help. Subscribe and join my community. Ciao
This is my first gimbal and admittedly I watched this video probably 10 times just to finally understand it all. Thank you for taking the time to make such a clear walk-through for all us folks at home! I wish there was a short tutorial on understanding the customizations to the values for panning, tilting etc. Thanks again!!
Hi Jay. Thanks for the comment. Glad I could help. Subscribe and join my community. Ciao
Does it come with active tracking?
YOU ARE THE BEST ON TH-cam FOR WEEBILL 3S ZHIYUN GIMBAL R .. DUE TO YOU I AM ABLE TO START MY CAREER AS A VIDEOGRAPHER
Hi. I am glad I could help. Subscribe and join my community. Ciao
🤗 Super presentation! Far superior to any Weebill 3S vids that I've seen this weekend.
Hi. Glad I could help. Subscribe then and join my community
Thank you from germany. I've seen this tutorial just before i buy this gimbal for to use it with my Lumix s5 camera. The sling is what i love, gives me more stability. One point i don' t like much is the only chinese or english version,because for me it' s not so easy to understand all advices. Better solution has the DJI rs3mini, it " speaks" german. But in my home country zhiyun is much cheaper so i try to complete my bad english...😊
Thanks for the message. Hope it helped. Subscribe and join my communitu. Ciao
Amazing video man! I was getting frustrated with all the other unboxing out there and when I landed on your channel… amazing 🤩
Well done! Much appreciated 🍻
Hello. Thanks for the comment. Glad I could help. Subscribe then and join my communitu. Ciao
Not even zhiyun have so much detailed video about this gimbal avialable on youtube..thanks for this great video
Hello there. Thanks for the message. I am glad I could help. Subscribe and join my community. Ciao
THIS is the instruction book that should have been included with the gimbal! Watch BEFORE you start playing with it.
Hello. Thanks. I am glad I could help. Subscribe and join my community. Ciao
Thank you very much for your very detailed video. I just purchased my Zhiyun Weebill 3S gimbal. Thanks to your video I feel more confident decision purchasing this product. I can't wait to view more of your videos.
Hi Ronnie. I am happy I could help. Subscribe and join my community. Ciao
Thanks for the very informative video.
I replaced my crane M3 with weebil 3s and was having trouble figuring out how to set it up, but now I have a solution.
I am a Japanese who is not very good at English, but your pronunciation was very easy to listen to and understand.
Thank you for your high quality instructional videos.
Hello. Arigatou gozaimasu! I love Japan. Thanks for the comment, I hope I could help. Subscribe and join my community. Jamata!
Best video for any beginner. Helped a ton....watch till the end you won't regret it!!!
Hello. Thanks for the comment, glad I could help. Subscribe and join my community
Busqué este video en español pero está tan bien hecho que pude entenderlo en inglés sin ningún problema, y me ayudó bastante a usar mi primer gimbal. Muchas graciassss, saludos desde Perú
Hello there. Thanks for the comment. Glad I could help. Subscribe and join my community. Ciao
This is not a simple process and your work is much appreciated! Thank you!!!!
Thanks. Glad I could help. Subscribe and join my community. Ciao
You, sir deserve a lot of praise for such a clear tutorial. Thank you!!
Thanks for the kind words. I just appreciated if you subscribed to my channel. Stay tuned. Ciao
just had weebill for christmas and damn your tutorial is perfect, clear, simple and complete! thank you :)
Ciao. Thanks for the message. Glad you enjoyed the video. Subscribe and join my community. Ciao
Brand new to video and just bought the Weebill 3S. This was a great tutorial! Thank you so much for putting it together. I don't know what I would have done had I not found you!
Hi there. Thanks for the kind words. Subscribe then and join my community. Ciao
Thanks for this video, Mamo!!! you really helped me understand how to work with my gimbal. I don't think I would have figured it all out myself.
Hello Gustavo. Thanks, glad I could help. Subscribe and join my community. Ciao
This was the video I was looking for! Straight to the point, easily explained, and simple steps. In the end, it worked! My Weebill S3 gimbal is working! Thank you so much. You sir have just earned a subscriber
Hello there. Glad I could help and thanks for joining my community. Stay tuned
Greetings, me again. I had a question:
I started using my gimbal in L mode, and after about 10-20 of seconds using it, it beeps a few times and says Axis Lock on the small screen with a lock symbol. And then it stops balancing my Canon EOS R 50mm. Do you know what this means? Is there a way to avoid it? I found that the only way to get rid of it is to turn off and turn on the gimbal again. Also for some reason, on my gimbal screen, the mode is written much smaller. In your video its right in the center with big letters but in mine its on the top left corner and in the center of the screen it says Av N/A. I have no idea what those mean.
@@berkkarsi hi there. Usually when that happens is because one of your axis is actually locked. Make sure you unlock all the motors. Another reason may be because your camera is not properly balanced or it is just too heavy for this gimbal. Hope it helps. Ciao
Awesome tutorial.
Hello and thanks for the comment. Glad I could help. Sunscribe to the channel then ans join my community. Stay tuned. Ciao
@@MamoAir already subscribed. Btw, i had to contact Zhiyun because pressing the shutter button didn't start recording. Apparently the button has to be firmly pressed and a bit deeper. Wanted to share that information.
Mano Air you are amazing and you deserve the best. Thank you for all the time you put into this video. I am about to purchase one and it helped a lot.
Hello Dimitris. Thanks for the kind words. Glad the video helped. Subscribe to the channel and join my community then, it would mean a lot. Take care
Pretty good tutorial!!
Thanks!
thank you so much! i was looking complete tutorial and this is the better i see, appreciate your time too show
Ciao, glad it helped, subscribe and jpoin my community
Thanks from Brasil! This is the most complete video, thanks, thanks and thanks!
Hello Barbara. Thanks for the comment, glad I could help. Subscribe and join my community. Ciao
very complet . i saw lot of tutorias and they dont explain as much as you . i just get the gymbal and follow all your instructions steep by steep and works great ! Thanks bro ! Saludos desde argentina , el culo del mundo. ! VLLC !!!
Cuao Federico. Thanks for the message. Glad I could help. Subscribe and join my community. Ciao
Thank you so much! You gained a new subscriber and I dropped my like! 👏🏻
Hello. Glad I could help and thanks for the subscription. Stay tuned
Video mais completo do modelo, tirou MUITAS duvidas! Principalmente referente ao modo de gravar selfie!
Glad you think so! Subscribe and join my community. Ciao
Thank you so much for the video! I do have one question. I would like to use the Shutter button on my Weebil 3S to start and stop recording on my Sony A6700. I have connected my camera through Bluetooth to the gimbal, but the shutter button on the gimbal is not controlling the shutter on the camera. Instead, it looks like it is controlling the focus of my camera. Do you know how I can change this option?
Nevermind! You have to press the shutter button harder to activate it, a more shallow click locks the focus point.
Sorry for the late reply. Glad you found the solution. Subscribe and join my community. Ciao
Sos un genio! El que mejor lo explica!
Hola. Thanks for the message. Glad I could help, I tried to be as detailed as possible. Subscribe and join my community. Ciao
Thank you for this instructions.
Hi. Hope I could help. Subscribe and join my community. Ciao
Muuuuy completo, muchas gracias por la ayuda❤❤
Thanks for the message. Glad you enjoyed the video. Subscribe and join my community. Ciao
Thank you so much! What an excellent video and probably the only reason I didn’t give up on setting it up and returning it!
Hi, Thanks. Do join my community then and subscribe to support the channel. Thanks
So easy, so well explained and so helpful.
Such a great video.
Thanks
Hi there. Thanks for the message. I am glad I could help. Subscribe and join my community
Thank you very much for the tutorial
Hello. Thanks for the comment, glad I could help. Subscribe and join my community. Ciao
Very good tutorial. Thank you so much.
Hi there. Glad I could help. Subscribe and join my community. Ciao
Perfect video!! Thanks from
Australia 🇦🇺 ❤❤
Hi Daniel. Glad I could help. Subscribe and join my community. Ciao
Obrigado por esse tutorial! Me ajudou em duvidas pontuais que eu tinha a respeito desse gimbal!! Sucesso ao seu canal!
Hello. I hope the video helped. Subscribe and join my community. Ciao
Do you have a video about the "Transmount video transmission transmitter" that comes included in the kit, is very complex to use .
Hi there. Sorry I do not have such a video
when you have it on pov mode for examble , can you push the trigger button to switch to lock mode for the time that you pushing it ,
and when releasing it, the trigger button ,can came back at pov mode again autocaticaly ??
You know , for use lock mode just for some seconds and going back at main selected mode instantly ,like Dji s gimbals ...
Weebill s doent doing that and i sold it for that !
Hello my friend thanks for the video! I have a question. I use a A7IV + sigma 24-70mm 2.8+ small rig cage. Do I just need to balance it and then auto tune, or do I also need to select the "motor level" to "high" since it is a heavy setup? Thanks for the help!
Hello there. This are things you can try for each setup. If itnis too heavy try with the strong motor. Hope it helps. Subscribe and join my community. Ciao
Thanks for the content, very useful
Thanks Bruno. Glad I could help. Subscribe for more. Ciao
Thank you very much for the tutorial. You are amazing. The way of presentation, the detailing, and straight to the points without unnecessary bgm or irrelevant subjects. Appreciate it.
Hello there.
Hope this helped. Subscribe and join my community. Ciao
You are the best, thank you so much, you made the best tutorial of Weebill 3 s!
Hi there. Thanks for the message. I am glad I could help. Subscribe and join my community
GOOD EVENING YOU ARE VERY EXPLANATORY AND DETAILED THANK YOU VERY MUCH BE ALWAYS WELL !!!!
Hello, thanks for the comment, glad to hear you enjoy my content. Subscribe and join my community, ciao
Amazing tutorial, great explanation, thanks Mamo Air!
Thanks. I hope the video helped. Subscribe and join my community. Ciao
at 11:03 When you say find the spot that it stays there... I can't find a spot like that- it always flips forward. Do you know what is wrong? Thank you!
Hello. Thanks for checking the video. If the camera titls forward you have to slide it towards the back of the plate a tiny bit and possobly also lift the side arm a bit lower. I cannot really help without having the gimbal here.. Subscribe for more and join my community. Thanks
Thank you so so so so so much!!!!!! Im so happy I found this video, you helped me so much with my gymball 🌞
Thank you. Glad I could help. Subscribe and join mu community
@@MamoAir i have a question. Im having trouble with stabilizing in portait mode! When i get to on axis its cool when i place my camera upwards but after that i cant get it to get stabilized :( its like something blocks it
Man literally u came in the perfect time thank you so much 🙏🏽
I guess you cane to watch when you most needed ut ahah. I am glad I could help. Subscribe and join my community. Ciao
Merci beaucoup pour ce tutoriel !!!
No problem. I am glad I could help. Subscribe and join my community
apanhei, mas consegui, seu video eh mto bom! obrigado! Do brasil!
Hello. Thanks for the message. I hope the video was helpful. Subscribe and join my community. Ciao
wow! you help me a lot with this tutorial! thanks for doing that! this weebill 3s is my first gimball and i was lost before watch your video. awesome!
Hi Rodrigo. Glad I could help. Subscribe and join my community the. Ciao
I just ordered this gimbal and it’ll be here this week! I was pretty excited, but your video just made me SUPER STOKED! Thank you! 🙌🏼🙌🏼🙌🏼
Hello. Thanks for the comment. Glad you enjoyed the video. Subscribe and join my community. Enjoy the gimbal. It is good!
Thank you! I just subscribed and I’ll be referring to your channel and this video regularly! :))
@@adphotojon awesome
How'd it go? I've never used one and I'm thinking of buying this one. It looks pretty amazing
Thanks a lot. They were very helpful in understanding the new device!
Hi. Great, happy I could help. Subscribe and join my community
Insanely detailed! Thanks a lot for taking the time. Amazing tutorial 🙌🏻
Thanks Gustaveo. Hope it helped. Subscribe and join my community. Ciao
Great video. How do you store this in a bag? What bag? Thank you
Hi. Thanks. You store the gimbal in its case. Hope it helps. Subscribe and join my community. Ciao
Hello, do you know of any accessories for attaching an external monitor to the Zhiyun WEEBILL 3S?
Also, I want to work with a Follow Focus, but I can't find a suitable model.
Hi there. You can use any clamp with magic arm attached or you can check this gimbal th-cam.com/video/FTeoOxvHnOw/w-d-xo.html
Hope it helps. Subscribe and join my community. Ciao
Hi, thanks a lot for this great video? For me it´s the first time using a gimbal so your tutorial was extremely helpful! One question about 10:15: Why is it necessary to slide the camera against the side motor?
Hello. Thanks for the message. I place the camera next to the motor because it's a way to keep the whole setup closer to the center of gravity. Hope ut helps. Subscribe and join my community. Ciao
Thanks a lot, very detailed and straightforward
Glad it was helpful! Subscribe and join my community. Ciao
AMAZING 👏 love how you go through all these details 😊😊
Hi there. Glad I could help! Subscribe then and join my community. Ciao!
Thank you very much, Mamo Air. Hugs from Brazil. Helped me a lot.
Hello Gilbert. Thanks for the message. Subscribe and join my community. Ciao
Hi, thanks for this video. Have you found a way to disable joystick panning at all? I like tilting using joystick but not panning. This used to be the case with older gimbals. Thanks!
Hello there. Sorry I have not tried to do so on my gimbal. Try to get in touch with the support team from Zhiyun. Subscribe and join my community. Ciao
Thanks so much for a great tutorial. I'm a newbie & your video helped me get set up.
Hello and thanks for the comment. Glad I could help. Please subscribe and join my community. Ciao
Thank you so much for the effort put in this video so helpful
Hello there. Thanks, I hope I could help. Subscribe and join my communitu. Ciao
So helpful and pretty good tutorial, its looks easy to understand from this tutorial video of weebill 3s
Subscribed 👍🏻
Thanks for the message. Glad I could help.
its a super super useful content thank you for this its lifesaver
Hello there.
Hope this helped. Subscribe and join my community. Ciao
Do you have a full tutorial of how to set this up in portrait mode?
Hi Mel. Thank for the message. I do not have a full tutorial for portrait mode
i tried setting up the portrait mode. but it's tougher cause the lock always get stuck with the slider. I followed the step and it happened like that.
very nice and in-depth tutorial. can we just attach the wrist rest and not side handle..??
Hello there. Thanks for the comment. Yes you can only artach the wrist rester. Hope it helps. Subscribe and join my community. Ciao
@@MamoAir hello.. sure I’ll subscribe.. I also saw your weebill 3E tutorial. Now that you have used both the gimbals, can you tell which one give better performance in stabilisation..??
Great video, was able to assemble it properly. Do you know any carry case for this? I bought the combo pack as well, but the backpack is unusable. Any advice is appreciated.
thank you man! you helped me a lot
Hello. Glad I could help! Subscribe and join my community. Ciao
I love you, man. Thanks for the tutorial.
Hi there. Glad I could help. Subscribe and join my community. Ciao
Спасибо за такой крутой гайд и видео инструкцию
Hello. Thanks for the feedback, glad I could help. Subscribe and join my community. Ciao
Very good video, thank you! Is it possible with the gimbel even if my camera display is broken? I always have to mount an additional display on top of the camera and connect it with a cable. would that still work ?
Thanks for the super helpful tutorial. Is it normal to have the motor clicking/jittery when it pans left or right past the default position?
Hi there. The gimbal should not shake. Make sure the camera is properly balanced on it as that may cause the clicking
This video is amazing, thank you! Just one doubt. What's the difference between POV and F?
No problem. I am glad I could help. PoV mode sets free all the 3 axis while F is pan and tilt only. Subscribe and join my community
@@MamoAir thank you, perfect!
how to do you connect the camera to the gimball? I have a fuji xs-20 and I want to be able to control the camera with the gimbal's buttons and it wont connect.
Thank You so Much! Excelent!
Thanks for watching. Glad I could help. Subscribe and join my community. Ciao
thanks a lot, great tut
Hello. I am glad I could help. Subscribe and join my community. Ciao
i have a question look that the camera is using the batery anyways if it says conected and in the icon of the batery of the camera is with a plug at his side. there something im doing wrong ? i put the same configuration that you show in the video
Excellent video
Hello. Thanks for the message. Hope you enjoyed the video. Subscribe and join my community. Ciao
your video is great!
Glad you think so! Subscribe and join my community. Ciao
hello friend, a hug from Brazil, your explanation is excellent, thank you very much
Thanks Diogo. Hope the video helped. Subscribe and join my community. Ciao
nice review! I don't understand why the weebill 3s start to be a powerbank to my camera sony a7s3 when battery is low... how can i change this setting?
Did you try the cable Type-C to Multi USB LN-UCUS-A03 or Type-C to Type-C USB LN-UCUC-A02?
have the same problem , my camera is not charching wile im using it
@@HellenLee-yz2oj have the same problem , my camera is not charching wile im using it
@@fotoyvideorosario Which item camera and which item cable you connect?
absolutely helpfull
Hello there. Glad I could help. Subscribe and join my community. Ciao
Once again a great job! You make it look easy!
Thanks Victor. Stay tuned! 🙃
This was a great video! Even tho I don't have an excellent english, thank you!
I have a question, can I use any lens if my camera is compatible with the gimbal? like a 18-55mm or a 50mm (canon)
Hello there. Glad I could help. Subscribe and join my community. About the lenses, it depends on their weight and shape. Check the zhiyun website fo compatibility or send them an email. Ciao
nice tutorial 🥰
Hi! I am glad I could help. Subscribe and join my community. Ciao
Nice, complete and directly tutorial! Thank you very much.
Awesome. Hope I could help. Subscribe for more and join my community. Thanks
Tks for video, is amazing!
Hello! Thanks for the message. Hope the video helped. Subscribe and join my community. Ciao
once in sling mode and trying to hold it with 3 fingers does it make the gimbal wanna roll sideways? or is it centered? thanks
Hi. Sorry but I do not understand the question
Great video and very helpful ❤
Great! Subscribe and join my community
What parameters do you recommend for taking videos of walking in the city? I tried a lot, but something just doesn't work. I use F mode. Follows hand right and left too fast and I have to manually adjust up and down, camera doesn't follow hand
sir what is its payload capacity and sir can fit fx3 and sigma 85 in it
Hi. Please see the Zhiyun website. I am not sure. Thanks.
Subscribe and join my community. Ciao
Hi Mamo, My footage seems a bit shaky with my Sony ZV E10 mounted over it. Is there any stabilization on / off option within this gimbal?
Hi, thanks for the comment. The gimbal helps to stabilise the image a bit, then you also have to apply some skills, also in walking. I mever have the perfect shot. Something that does not work for me is to use a gimbal and keep the stabilisation of the camera on too. May be give it a try. Subscribe and join my community. Ciao
you're wonderful! thank you :)
Hello. Glad you enjoyed. Subscribe and join my community. Ciao
Great tutorial. Thanks
Hello there. Thanks for the comment. Join my community and subacribe for more videos. Ciao
At 15:18 you point to a clamp that for vertical tightening, tha freely spins for you. However mine does not freely spin. It hits the main long plate... and I cant work out why. We have the exact same equipment, fitted the same way. The only way I can spin the vertical clamp to loosen it, is to move it all the way up the top of the plate. Any else has this issue?
Hi, is there any compatible focussing motor for this model? I see there is one for the old Weebil S, but haven't seen much info about this one.
Their CMF-06 zoom/focus motor compatible with this Weebill3S.
LUMIX S5 not connecting to Weebill 3S Bluetooth any solution plz help
Hello there. I recommend to get in touch with the brand. Subscribe and join my community. Ciao
Hi Mamo good to see you again . i took your Udemy course it actually helps me a lot. this course is also good tutorial for users of Zhiyun 3s . but unfortunately I bought Dji Rs 3, it actually good gimbal but there aren't enough courses so i wish maybe you will update a tutorial course of DJI RS 3 for beginners .
Hello. Thanks for joining my Udemy course, hope it helped. I do no jave partnerships with DJI so I find it more difficult to review for them. Stay tuned anyway. Ciao