Did you really powder coat an intercooler? I would have thought you would be making it less efficient. Anodising would be the way to go for a colour change.
The common rail engine responds very well to ECU Reflash. Though it's a pain because you can't do it over OBD. You have to remove the ECU and run wires through it to be able to read/write.
My Hyundai iload started to died on a trip home from a great day out with a car load of clients with mental health issues! It was a night mare, but the faint knocking sound i first heard turned into a loud knock that my mechanic (I took the car straight to him) heard and diagnosed on the spot as the fuel injectors which he fixed along with a tune up. Long story short on a test around the block he told me it "Died"!!!! and now i was up for $4000 and a dead car :( My question is this should i pay someone to put a new or refurbished engine in this van or send it to the wreckers? I am an artist i don't earn a lot but have about $10,000 saved and wonder if i should risk getting this fixed? I need a car to at least get to work! and at the moment i am running around in a petrol car that is so old and has done 360000ks i know right!!! I am grateful to have the use of it but it is obviously on borrowed time!! I have to make a decision on what to do...throw my money at fixing my Turbo iload or send it to the wreckers and buy another cheap car? Trouble is it will mean no more nice trips for my clients as the van was great for fitting them all in. What would you do??
Could be rod knock only problem with these vans very expensive for engine replacement if rest of van good nick go motor from wrecker s ive been down same path spending money on HiAce never again i own iload 260 thousand kays if motor goes so does the van and i love it like a child move on😢
because heat radiation is infrared light, this coolers can get rid of the themperatur more easyly if they are painted black. Like a black body gets much warmer in bright sunlight then a white or silver one.
If u block egr the valve the engine will run hotter which is not ideal i know they soot up and EGR pipes crack and leak id leave it alone Run a after market air filter remove inlet pipe that goes out bonnet that lets a lot more air in just keep filter Clean much more responsive 😮
Hi there, me would like to know if blocking the EGR-Pipe with this selfmade "gasket" does have any effect on the engines warmup time? And if the OBD give out EGR errors because of not enough EGR flow? Of course I know that this whole EGR Systems are a crappy thing for this engines.
There is an some sort of Air diverter trim that sits behind the front upper grill where the intake pipe from the airbox connects to. Its very small and its stops the air from going straight into the intake. It diverts it towards the RH headlight for some reason. I temoved it on my one. Can you see if it makes any difference
Grub got another van for you to work your magic ;) maybe a little less oily. Did you guys do a before dyno to compare? Great to see how you make the motor breathe healthier!
Finally a mod show for the mighty working man and his mighty van!
Yeah i Loads are the best. Not as reliable as hiace but its quicker, has bigger cab and more comfortable
I'm loving these Day job episodes! Keep em coming!
That's why being a contractor is cool!.....red light to red light baby!! ;)
Excuse me, the stereos they did on pimp my ride worked excellent!
and the tv in the headlight too
And the chandeliers, water fountains, and other ridiculous stuff they considered a good idea.
Every car needs a chocolate fondue station
There was actually a recall for those intercoolers and piping. It should've been replaced at the dealership.
Did you really powder coat an intercooler? I would have thought you would be making it less efficient. Anodising would be the way to go for a colour change.
Is this the iload with the track pack or did you get the pov version?
Ha ha. This is the best comment of the year so far.
Need more mod videos... love this one.
The common rail engine responds very well to ECU Reflash. Though it's a pain because you can't do it over OBD. You have to remove the ECU and run wires through it to be able to read/write.
Do an intake manifold clean, injector seals and tune and it'll be mint
Put a boost gauge on it and you will see the boost those vehicles run.
Any exhaust specialists in Perth WA do this
You're right, it sounds like my Jetta TDi with 2.5" pipes...
Looking forward to upgrade my dad's Starex...
Hilarious!
My Hyundai iload started to died on a trip home from a great day out with a car load of clients with mental health issues! It was a night mare, but the faint knocking sound i first heard turned into a loud knock that my mechanic (I took the car straight to him) heard and diagnosed on the spot as the fuel injectors which he fixed along with a tune up. Long story short on a test around the block he told me it "Died"!!!! and now i was up for $4000 and a dead car :( My question is this should i pay someone to put a new or refurbished engine in this van or send it to the wreckers? I am an artist i don't earn a lot but have about $10,000 saved and wonder if i should risk getting this fixed? I need a car to at least get to work! and at the moment i am running around in a petrol car that is so old and has done 360000ks i know right!!! I am grateful to have the use of it but it is obviously on borrowed time!! I have to make a decision on what to do...throw my money at fixing my Turbo iload or send it to the wreckers and buy another cheap car? Trouble is it will mean no more nice trips for my clients as the van was great for fitting them all in. What would you do??
Could be rod knock only problem with these vans very expensive for engine replacement if rest of van good nick go motor from wrecker s ive been down same path spending money on HiAce never again i own iload 260 thousand kays if motor goes so does the van and i love it like a child move on😢
104kw but how much torque?
why do people power coat coolers ? doesnt that put a thermal barrier and makes the cooler heaps less efficient ?
Quite right.
because heat radiation is infrared light, this coolers can get rid of the themperatur more easyly if they are painted black. Like a black body gets much warmer in bright sunlight then a white or silver one.
How much power does it run with mods?
I’ll be willing to donate my mums car for a day job episode 😂 it’s an 02 focus
If u block egr the valve the engine will run hotter which is not ideal i know they soot up and EGR pipes crack and leak id leave it alone Run a after market air filter remove inlet pipe that goes out bonnet that lets a lot more air in just keep filter Clean much more responsive 😮
Hi there, me would like to know if blocking the EGR-Pipe with this selfmade "gasket" does have any effect on the engines warmup time?
And if the OBD give out EGR errors because of not enough EGR flow?
Of course I know that this whole EGR Systems are a crappy thing for this engines.
It's gained 5.6kw at the rear wheels, will you guys been chipping it?
Do up your fly you grub! lol 3:57 (and I'm not talking to Grub...)
6:48 He's a White Dude in a White Van, that thing would be the fastest thing on the road. 🤣
There is an some sort of Air diverter trim that sits behind the front upper grill where the intake pipe from the airbox connects to. Its very small and its stops the air from going straight into the intake. It diverts it towards the RH headlight for some reason. I temoved it on my one. Can you see if it makes any difference
It will be more responsive factory quiet restrictive go k and n air filter just keep clean 😅
U can even open Top of air box like a sardine Can leave maf sensor intact otherwise trip a code check light will come on
Grub got another van for you to work your magic ;) maybe a little less oily.
Did you guys do a before dyno to compare? Great to see how you make the motor breathe healthier!
Sure did.
Re-watched the first episode, cheers!
Give the auto a service with a new filter and I bet it will make more power again
Yea what happened to the falcon ?
It will be back for stage 2
Did you delete the cat
“Tune” incoming?
Next episode
G'day, what is going into the engine before the oil? Cheers.
It is a diesel additives
For the engine oil
Thought the mx6 was gone?!?!?!
Not all videos are released as they happen or in order
Hehe we have wooshy turbo noises lol