hey just to let you know , its much easier to install then that. I had one come a month or so ago and all I did was feed the wire from the leaver then through the little clasp whilst it was still in the dropper bit at the bottom , i then pulled it tight and then tightened the little screw to hold it in place. its working perfectly so far :)
My new levo is supposed to have a 190 mm manic dropper, but when I measure the drop, it is 7 inches, which is 178mm, wth? The s5 has a 170mm , so I don't think they put the wrong one in. I don't know why they say it is 190 when it's 178mm.
I did have to adjust the locking barrel on the cable after a ride or two. There was too much play up at the trigger. Since that adjustment it's been issue free. it was soooo much easier than the Easton Haven DP I had to make that adjustment. A 1x would also be better for the trigger location too. The post does stick when you first get on it but that is mentioned in the instructions and not a issue at all. Once you activate it is fine, it's just from being in the up position for a few days
Hello from Italy, I’m having problems with the Fusion Manic. It won’t stay down after pressing the activator and continues to float up and down without stoping where I want. What could it be? Thanks
Yes I do for the price, especially since it is user serviceable. My previous 2 posts failed and were unrepairable - a Giant contact that came on the bike & the Easton Haven. But honestly I didn't really look too hard at other options since I'm not a hard core MTB rider.
hey just to let you know , its much easier to install then that. I had one come a month or so ago and all I did was feed the wire from the leaver then through the little clasp whilst it was still in the dropper bit at the bottom , i then pulled it tight and then tightened the little screw to hold it in place. its working perfectly so far :)
Very good idea. Thanks for posting
Thanks, appreciate the effort in putting together a high quality explanation.
Thank you Sir, just what I needed.
The opposite side of the caliper is for ID measurements.
He, you spotted it too 🤙
Awesome! This helped me a lot. Thanks!
My new levo is supposed to have a 190 mm manic dropper, but when I measure the drop, it is 7 inches, which is 178mm, wth? The s5 has a 170mm , so I don't think they put the wrong one in. I don't know why they say it is 190 when it's 178mm.
I love the bird calls. What state are you in?
I got on on my Stumpy, It's only 3 months old and the dropper won't go down, Took collar off cleaned and greased, but still the same.
same with me...
how's this post after having it for a while ?
I did have to adjust the locking barrel on the cable after a ride or two. There was too much play up at the trigger. Since that adjustment it's been issue free. it was soooo much easier than the Easton Haven DP I had to make that adjustment. A 1x would also be better for the trigger location too. The post does stick when you first get on it but that is mentioned in the instructions and not a issue at all. Once you activate it is fine, it's just from being in the up position for a few days
This post came standard on my bike, been running it for 2 years (a lot) with no issues at all
Only lasted me 13 months with Manic
Hello from Italy, I’m having problems with the Fusion Manic. It won’t stay down after pressing the activator and continues to float up and down without stoping where I want.
What could it be?
Thanks
Do you think it’s worth it
Yes I do for the price, especially since it is user serviceable. My previous 2 posts failed and were unrepairable - a Giant contact that came on the bike & the Easton Haven. But honestly I didn't really look too hard at other options since I'm not a hard core MTB rider.
Micrometer is upside down
Calipers. Yeah upside-down.