Do you know if this has the regular tray mount points for a 60% board? If so, I might be inclined to get one and swap out the case for a Tofu Redux and mod it. I'd appreciate it if you can provide me the infos, thanks.
Hi sorry for the late reply. Akko came back to me saying that the 3 mounting points on their 60% pcb are standard, “However, since the case depth and also electronical components interference could also be an issue causing compatibility, it is suggested to ask our community members if they've tried those bfore. Also the side of the USB-C port matters as well. Ours are on the left.” Hope this helps!!
One of the defining features of the Wooting 60HE was the advantage of being able to swap cases with ease because of the PCB compatible to most 60% cases. Is this board able to do that too?
Hi sorry for the late reply. Akko came back to me saying that the 3 mounting points on their 60% pcb are standard, “However, since the case depth and also electronical components interference could also be an issue causing compatibility, it is suggested to ask our community members if they've tried those bfore. Also the side of the USB-C port matters as well. Ours are on the left.” Hope this helps!!
@@Zwylo yo its fine! Actually surprised that you came back with me for this since most TH-camrs or commenters on this social media don’t come back. Really appreciate it, thank you❤️ Bummer that the pcb isnt compatible with most boards but if Akko decides to release a pcb compatible to most bases, I’d jump on it. Or if Akko decides to make an aluminium case too.
I would say use the ‘Custom’ preset with WASD 0.2 mm down and up with always rapid trigger enabled. You could also lower the actuation for your ability keys but keep space bar the same as you wouldnt want any accidental mis-presses in gunfights. :D
hello content creator, if u ever tried some rhythm games such as u mentioned like osu, did u experience any latency issues or any kind of problems like that? (with and without rapid trigger), if u want to try, please let me know of ur experience replying under my comment, i will be very glad. thank u
Hello commenter :) I have not but I will try osu right now for you good commenter. I will let you know in about 30 minutes or later if i get addicted again.
UPDATE: so after a hour or so of just doing 4-5⭐️ maps with speed maps aswell i can conclude that the rapid trigger is more useful on speed maps with obviously more rapid presses. Triples and quads felt easier however could have been placebo. No latency issues to report here however if you set the up and down to 0.1mm i think you could have some issues with double actuation but .2 down and .1 up felt just fine! Any more info you need i will be happy to find it out for you dear commenter. ❤
Also without rapid trigger felt like a normal top end 60% gaming board but if you keep jumping from rapid trigger to normal i found that it took me a few minutes to adjust.
banger editing, solid sound effects, great background music, good audio and video quality. good points to buy the board with an unbias review of the keyboard. solid 10/10 review. keep it up!
@@naya2071 not that I am aware of however the feature is now getting banned anyway in games like CS2 i think u saw and many will probably follow to maintain “competitive integrity” if your thinking about competitive gaming. So in reality its not that much of a loss
Do you know if this has the regular tray mount points for a 60% board? If so, I might be inclined to get one and swap out the case for a Tofu Redux and mod it. I'd appreciate it if you can provide me the infos, thanks.
I will get you this info asap just going to ask.
Hi sorry for the late reply. Akko came back to me saying that the 3 mounting points on their 60% pcb are standard, “However, since the case depth and also electronical components interference could also be an issue causing compatibility, it is suggested to ask our community members if they've tried those bfore.
Also the side of the USB-C port matters as well. Ours are on the left.”
Hope this helps!!
Insightful review. Would definitely want to try a rapid trigger board without breaking the bank. Looking forward to any updates that you may have.
what's ur mouse? is dat still ur main mouse currently?
@@JD-mk9qp finalmouse ulx is my mouse and yes im still using it
How do you get a manufacturer to send you hardware when your channel has less than 300 subscribers?
@@DejayClayton I just dropped them an email and it all went from there. I am very grateful to Akko for the products they send out.
@@Zwylo What's the email? Is it the support email?
@@Enforz i contacted them with support@akkogear.com
@@Zwylo Ok thanks
@@Enforz np good luck
Great video and review! Can you please review ATK68 keyboard next? 🙏
bought it the other day. unbelievable keyboard.
should i buy akko 3061s he or ATK68? 😵💫@@chaldky
@@chaldkyunbelievably what?
One of the defining features of the Wooting 60HE was the advantage of being able to swap cases with ease because of the PCB compatible to most 60% cases. Is this board able to do that too?
Im trying to find this out but akko hasnt responded to me yet. When they do i will let you know
Hi sorry for the late reply. Akko came back to me saying that the 3 mounting points on their 60% pcb are standard, “However, since the case depth and also electronical components interference could also be an issue causing compatibility, it is suggested to ask our community members if they've tried those bfore.
Also the side of the USB-C port matters as well. Ours are on the left.”
Hope this helps!!
@@Zwylo yo its fine! Actually surprised that you came back with me for this since most TH-camrs or commenters on this social media don’t come back. Really appreciate it, thank you❤️
Bummer that the pcb isnt compatible with most boards but if Akko decides to release a pcb compatible to most bases, I’d jump on it. Or if Akko decides to make an aluminium case too.
what is the best setting in that keyboard for valorant?
I would say use the ‘Custom’ preset with WASD 0.2 mm down and up with always rapid trigger enabled. You could also lower the actuation for your ability keys but keep space bar the same as you wouldnt want any accidental mis-presses in gunfights. :D
Do you use roar mode?
When i use rapid trigger mode it always bugging the windows key automatically activating
@@raaamqt5110 You probably need to re-calibrate the keys. Read up on Akko's website or look through the software to find out how.
@@raaamqt5110 no i dont use Roar mode i find its buggin
is it the pc compatible with tofu60 case?
I have put an answer to that i think in other peoples comments about the same question.
and another great alternative to the Wooting which doesnt come in ISO Nordic layout, fantastic.
Sorry ☹️
is ur monitor oled?
@@OkArcc yep if you want a video about it just let me know. Its a new 360hz oled panel from msi.
hello content creator, if u ever tried some rhythm games such as u mentioned like osu, did u experience any latency issues or any kind of problems like that? (with and without rapid trigger), if u want to try, please let me know of ur experience replying under my comment, i will be very glad. thank u
Hello commenter :) I have not but I will try osu right now for you good commenter. I will let you know in about 30 minutes or later if i get addicted again.
UPDATE: so after a hour or so of just doing 4-5⭐️ maps with speed maps aswell i can conclude that the rapid trigger is more useful on speed maps with obviously more rapid presses. Triples and quads felt easier however could have been placebo. No latency issues to report here however if you set the up and down to 0.1mm i think you could have some issues with double actuation but .2 down and .1 up felt just fine! Any more info you need i will be happy to find it out for you dear commenter. ❤
Also without rapid trigger felt like a normal top end 60% gaming board but if you keep jumping from rapid trigger to normal i found that it took me a few minutes to adjust.
@@Zwylo alright tysm! your experience is very important to me ♥️♥️
@@Zwyloby the way, do u consider any rapid trigger with magnetic switch would be a great thing for rhythm games?
is it hotswappable
With other hall effect switches yes but not with standard mechanical switches.
banger editing, solid sound effects, great background music, good audio and video quality. good points to buy the board with an unbias review of the keyboard. solid 10/10 review. keep it up!
Thank you very much for the kind words!
I use the 3061S HE World Tour Tokyo and it‘s spotless! Very nice keyboard imo
nice!
does it have snap tap/socd feature like wooting or razer one?
@@naya2071 not that I am aware of however the feature is now getting banned anyway in games like CS2 i think u saw and many will probably follow to maintain “competitive integrity” if your thinking about competitive gaming. So in reality its not that much of a loss
wonder what switches are able to go on the pcb
is it prelubed?
Certainly feels like it. Very smooth switch travel