Google Assistant Controlled Multiple Appliances | Monitor Sensor's data | IoT Projects | ESP8266 12e
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- JLCPCB Prototype for $2(Any Color): jlcpcb.com
This video shows to make one IoT project using ESP8266 12e board(NodeMCU) with which you can make,
- Controlling multiple appliances through Google assistant from anywhere in the world
- Monitoring sensor's data from anywhere in the world
- Automating home appliances(lights,fans,etc) whenever we enter into the room using motion sensor
- Getting notifications on our phone whenever anyone secretly enters in our room or lab.
- IoT based Air quality monitoring device by attaching dust sensor,Co2 sensor,Temperature,humidity etc
these are some of many applications which can be made using this single project.
_________________________________________________________________
Timeline
0:00 Introduction to the Project
1:00 Components introduction and their uses
2:37 PCB designing,Ordering and Soldering
4:14 Circuit Diagram
4:26 Process of working of this whole project
4:44 How IFTTT works?
5:33 How Adafruit MQTT Works?
7:46 Making account in Adafruit MQTT and Configuring it
10:09 Explaining the code used in this project
15:20 Configuring IFTTT on your smart phone
18:10 Working of this Project in Action
19:57 Introduction about the Lab where I installed the project(Best ATL)
21:03 Giveaway Contest announcement
_________________________________________________________________
Buy the components from here
ESP8266 12e development board(NodeMCU) (amzn.to/2BKS7cv)
5V Relays (amzn.to/2ChddQC)
1n4007 Diode (amzn.to/2EM4IuD)
BC547 transistors (amzn.to/2oiTbfV)
330ohm resistors (amzn.to/2ojg8zN)
16 channel analog multiplexer module (amzn.to/2CVawDI)
PIR motion sensor (amzn.to/2EK1OX2)
MQ35 sensor
Sound Sensor (amzn.to/2HCYO0z)
Light Sensor (amzn.to/2CcBAPr)
DHT11 Temperature and Humidity sensor(amzn.to/2sPh3fO)
7805 Regulator IC (amzn.to/2CdUvcq)
9V Power Adapter (amzn.to/2CfffAL)
2 pin PCB mount screw terminal (amzn.to/2EM5Luz)
_________________________________________________________________
if you love watching my videos and interested in learning new new projects,then donate me at PayPal so that I can do it forever and better then before.
www.paypal.me/techiesms
_________________________________________________________________
Code & Library
goo.gl/sHrmMK
_________________________________________________________________
Facebook page of Best ATL :- / bestatl
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
WhatsApp number :- +91 82000 79034
_________________________________________________________________
#techiesms
explore | learn | share - วิทยาศาสตร์และเทคโนโลยี
Great project, one of the best I seen till now! Regads from Buenos Aires, Argentina
Finally the wait is over. The project of yours was far better than what I had expected.
This project will help me making my btech final year project and it will be definitely very different from others projects.
I would like to add door lock and unlocking system in this project and will try to find more of its applications.
Firstly, Thank you so much!!! Your videos helped me a lot in learning about IOT. I'm from ECE and your videos are the best to know about many of the electronics especially nodemcu. I'm very much inspired by your videos and started doing simple projects using nodemcu. I have a project and idea which I am posting it here. Please do make some suggestions. I want to make a fully automated smart home that can switch on or off lights whenever you enter the room. You can also be able to control them using voice commands(using IFTTT and google voice assistant). You can also be able to control the devices like AC.Whenever the temperature is high (using dht11)and when it detects a person inside the room(using PIR sensor) , it automatically switches on the ac and gives a notification to the user. The project also focuses on security.Whenever we aren't home, and when it senses a motion before the door, it sends a notification to the owner.Picture of the person who is infront of the door can also be sent to owner.By setting the PIR sensor in a particular place or keeping the pressure sensor under the mat before your bed and collecting the data from some specified time in the morning we can identify when the person wakes and can automatically turn on the geyser and send some notification to the user.
Idea is excellent
Implementation is excellent
Above all clearly explained...Lot of improvement in this video... fantastic 👏💪👌
Thanks for the project I am a student of ATL and I have become your fan after this project I am making a small 3d printer
We can use this for helping our moms in kitchen. We can monitor the temperature and LPG (leaking or not) from that we can turn on chimney or exhaust fan using relay. We can also turn on gas using Google Assistant also turn on light. Mothers have to see whether the water tank is full or not so that she can turn off the motor for that we will use water level sensor to check level of water in tank and to control it from Google assistant and IFTTT. We often open fridge without mother's permission so we can fit motion sensor so that mother will know that fridge is open. She can also control electrical appliances like Fan, Light, juicer etc. used in kitchen.
Thanks .This was the best IOT tutorial by u..!!!
Thanks bro ... I had made this project as my final year project...and got a huge positive response...thanks a lot for that
Bro how you design pcb
What was the total cost of whole project
Thank you very much for this teaching , very good information.
Best informative and helpful video ever seen.. Thanks for spreading such great data about automation..
I am badly waiting for the 2nd part you are awesome man.
Wow Fantastic update for previous project...gaining tust for each videos
Excellent project. Many thanks for sharing.
the best iot project so far
Nice work what more can be done is using magnetic switch as door sensor and turn on light when the door is opened. This will make the actions quick as soon as we open the room we got the room lighten and save the time of taking phone out and asking google . We will take oyr seat and then ask google what else we want to do. Really love this project and had made 2 projects working( for room) from your tutorial and trying to make whole house automated.looking forward for the use of servo. Nice work keep it up
One of the best *IOT* project
good and very nice making this projects and improves our electronics ability. thanks
Great 😎👌👌
Your tutorials are well explained and very easy to understand. I learnt ESP01 from your tutorials. Will start with 12E soon. Thank you so much😊
Your video tutorial is well explained, I am interested in this project , can you send the Gerber file to ipad2k10@yahoo.com
I will use this PCB in developing the project which I'm making in our college and this can be used to control machinery in the risk probe areas of certain industry and in mines,and for developing a better projects to reduce the risk of human life
You are the best youtuber I have ever seen!
Well thanks for this
But if I would allow to ask the reason then what would you give the reason for choosing me the best
This perfect a thing. Thank you.
Nice video sir.... Jabardast
I would use service for my grandfather's projector screen, he likes to watch movies a lot and is not very healthy to walk around and turn the screen down. Even if you don't give me the PCB , this video was so helpful that I can make my own
Feature of iot. So much to learn. Thanks
i have already makes the project of light control by ESP866 in Blink but today i think something new add my this project so seen your video and this is really so good and i have new idea for this but I'm not saying at this comment box. keep it up sir ... 👌👍❤️😃
Good job sir. Make a new projects like this. Keep it up
One of best project ever
Hi sir
I'm going make this project.
I'm startd designing pcb board but i have i doubt ''where did you use the PIR motion sensor in circuit?''
and connections of the relay "what did you connected between D0 and GND of the 9V?"
Superb work.
Awesome video 🔥
Amazing project
Hi, I'm trying to get in touch with * PCB * so they develop my board like I do? and in the case of this donating to this helping the friend there can deposit in the ticket no?
I like your video and it will help us to make btech final year project
Hi, I'm doing this project in this semester. I got a doubt on attaching hardware appliances to relays. Could you please upload a video on connecting fans and lights to relays.....
Sir I just love this video and wanna going for this for submission for my major project.i have learnt what you have discussed.but could you pls tell me how u have connected the sensors which is hided by aluminium foil?I request You kindly Teach Me How U connect all the sensors and finally how it will be connected to Room Electric Board? Awaiting For Your Reply Sir
Great project bro..
Great project 😊
people use teamviewer and other softwares for casting and controlling pc from large distances, but problem comes when the pc is not turned on. so we can integrate it to turn on the pc.
it should be applied where human errors occurs the most, like when someone turns on the water motor pump and forget to turn it off. it can inform the user about it and make user turn off motor or automatically turn it off.
it can be used to toggle headlights of cars in case someone forgets to turn it off. it can also be used to make car send location when asked and start vehicle and also to open or close garages.
it can be used to lock or unlock general home locks.
it can be used to limit usage of electronic gadgets used by children, so as to reduce their exposure to radiations and reduce wastage of their time.
we can command it to turn on toaster and coffee machines to as to prepare our breakfast while in bed.
thanks for such a great guidance you provided through this video.
thank you so much for your super cool explanations, I love your patience, I also love to recommend your videos to my friends, I'm looking forward to more awesome videos, thank you :-)
very nice idea you also can on off water motor and play music in home theater
EXCELLENT ONE!!! ...how do we pass variables via # and $ out of IFTTT?
If someone keeps jammer near home then ?? So it wouldn't be more secure if we use lan instead with rasp pi.
Thanks a lot for your video and explaining.
I think there are more precise temp/hum sensors DHT-22.
You may use them in future (circuit is the same).
I think this project is perfect for studing. And it would be great to add some multiply temperature sensors ds18b20 to increase the ability to measure temperatures and, for example, to make automatic fan control according to setpoint temperature.
Please could you send me file for PCB board.
Thanks and wish you great ideas for future videos and projects.
thanks alot but how we can get only one relay with switch to turn on light from online or from button
great job.
a question, Can you check the temperature of sensor troung google assistant ?
example: "ok google" .... "how is the temperature of may room ?" . .. and google respond " the temperature is xxx"
regards
i love this project
But this will take more power and increase the electricity bill? Can you activate the Low Power Mode
hi good day i try this project but when i'm putting the code to the esp8266 there where error showing up and the error was adafruirt_MQTT.h: no such file or directory
thanks it could be a big help for me thank you in advance
Great bro
Great sir
Do we have to pay custom duty charge on this PCB order
Insert also feedback system like
if light 1 is and again you ask to google assistant "turn on light" then it will give you massage that "your light 1 is already on".
And add one status tab to give you status of how many appliances are on/off . energy consume by that appliances (optional this energy measurements).in energy measurement you can get how many hours your appliances are on.
Turn on light on/off timer.
This was cool
Wow really great project can u plz share easyada graber file . Also can we control this project from Alexa
How to connect the sonoff hardware made in previous tutorial with this Google assistant controlled appliance
very nice presentation
Thanks a lot
good work. I think it should be useful for everyone.
can u make this device which helps people without voice command.( sensing room teperature switch ON the fan, sensing light intensity switch ON lights)
Thank you sir
I want that Gerber file and the list of components which you used in it, and the connections with the main supply.
Hey, I need the Sensor Data on Google Assistant.
For example,
Me: Temperature at my home
Google Assistant: replies (reads the sensor value from Adafruit gauge) The temperature inside your house is 28 degrees.
How can Google assistant READ data from Adafruit?
Very good, India!
You super bro really impressed , presentation kills and convey the info perfectly 👍🏻 need Gerber file of this project can you send me
Thank you sir for uploading such kind pf project sir just want pcb design for implementing it plz send it
I will be using this board for my desk that will be automated and will do all the things required when it detects a human
Can i control multiple smart plugs which is connected to different WiFis.... From cloud based on temp or relay signal?
i love this
going to implement that..
I can integrate it with Rpi Google assistant and make it handsfree and one thing bro can we readout the sensor data
Hey bro I want the Gerber file for the home automation with Google assistant for 4 relays...
use in PCB also distance measurements sensor for water level measurements,which is uses to tank motor on off
This is the unique project on the you tube so far... Can you help me with the Gerber file plz
Stairs case wiring
For controlling through mobile as well as Board switch's
Both are we can use if mobile person is not there in lab so, we on off Appliances using switch's also.
Jaysukh Chavda yeah that would be convenient because relays are already SPDT
GPS module bhi interface kr sktehe kya ispe
Will staircase wiring work for this?
What is that component that connects D0 pin and GND of Node MCU in the circuit (playat:: 4:14)
If it will take 20 sec to read data so when will it turn on the light bro as it is continuously reading lot of sensor there will be a great delay if i am wrong please correct me and please if you can explain the code more briefly
Can u put video about openhab2 everything because there is habpanel so u can control everything in one place
Mrunal Dhoble
One of the best thing it can be used is to Design a Smart Locker along with a Safest Locker room.. which must be equipped with a locking system using servo Motor and even we can track if anyone break's on to it using some essentially sensors and even we can place a servo lock system outside the locker room so as to quickly lock out the door from outside itself when opened without self access(using coding which will create auto-locking of the Door or manual command from phone). No need to fire a theft F.I.R as u'll get ur thief locked up in the locker room itself.. just needs a gud mechanical protection supported along with the locking module on the door. Plz let me know if this can be useful bro, and if yes.. i hope m in for the give awayz..😆😉
When the power goes off , how will you save the last state of the relay so that if ur relay was at LOW state last time, it will remain at the same LOW state after the microcontroller is powered up again ?
Transfer a switch from the grid to any renewable energy if there are outage of energy automatically. Can you please help me create this project?
blink app is more convenient i think...... what's ur suggestions?
Excellent Project Thanks For Code And How To Make An local MQTT Server
I want to implement this project on my college. My college is an engineering college and college is very big and has many buildings . So, There is a problem arises on switching on off the light of classrooms, labs , department and other places for the working peoples. So, by implementing this project we can omit this problem or you can that will be easy for them control things from any place. Also I want to implement this project like that I can control the light fans by normal switches and by this project. So, there will be manual option for some emergency. Also I want to add servos to control the speed of the fans by existing regulators,temp and humidity sensor and pir sensor.so,I want those circuit boards for initial testing or you can say prototypeing in my college...
How to get temperature value on Google assistant when we say, " What is the temperature.", for the same project ?
it is good but it is not enough , i m also want to make home automation project which also count visitors with help of ir and in case of electricity power cut they notify me , if someone can switch on\off light it notify , and it has call based operations system using DTMF for secondary options , door lock and unlock function and later on i m include R pi to add AI
Please upload a detailed Video tutorial on easy eda about this project. I am surrendering that i cant design pcb so i could learn from you. Thank you
awesome bro...could you plz share the easyeda global file for this project..
can i get the pcb board design?
and the schematic diagram?
thanks in advance
Hai, This is really a wonderful project and well documented. Thanks for publishing it. I tried it and it works fine but, if I have a slider to adjust the fan speed it will be still Great addition.
Please suggest me the additional code lines in Arduino to incorporate this feature.
did u get the code for it sir??
Please make a video about arduino pH with temperature meter for aquarium. Thanks
Thanks man, for teach us all this
Hey i try using your code and modify my adafruit account and ifftt but the problem is im failing with connection with MQTT i dont know what is problem can you help me with this??
Hi,
Very Nice project and demonstration.
I would like to get the PCB or need your help to design with Easy EDA application.
Please suggest.
You can get my pcb design for free
Just search for techiesms user on easyeda
Thanks for your valuable response.
Please suggest the link for the same.
I have done a project with node mcu and relay module. But I wanted this to be on same pcb as you have done.
Please share the link for pcb and BoM for the same.
Thanks & Best Regards,
Rupesh Avinash Salvi
I would like to keep in touch.
Please send a test mail on rupeshasalvi@gmail.com
Thanks & Best Regards
Connect with me on Whatsapp
82000 79034
Really superb
Can you share pcb circuit diagram...?
All my pcb files are open
Just search for techiesms user on easyeda
Can i use Arduino uno instead of nodmcu
i have implemented the same project using Blynk app so its quite similar
I designed my own pcb using the same way just wanted to ask like a fellow brother asked, can we get google read the temperature value when give a certain command, any assistance would be appreciated and obviously these videos are worth a lot for helping people like us who are on a basic level
Thanks
Bro can you tell how you did it ? Because Im also trying that but after uploading the code the ESP8266 stucks at Connecting to blynk-cloud.com:80
and Login Timeout
Exactly this is what i'm looking for. Thanks for your work. However I have ESP32 board. Can you confirm this code works with that chip? Thank you !
With a little modification you can run this code
Sir if u send data 1 then device will be off because when we work with relay we use logic 0
How many relay can control by nodemcu ?
suggestion: can you please add a feature that can set a time limit to the appliances using voice command
Where do you find the ESP8266WiFi.h library?
How can I request the DHT11 sensor temperature or humidity via IFTTT with Google Assistant?
I ask: “tell me the temperature” and he says "the temperature is number°C"
I ask: “tell me the humidity” and he says “the humidity is number%”
do you know how to do it?
I stumbled on your channel 12 hours ago and have binge watched over 10 videos today. You are amazing. Could you please send me the gerber file for this project. I would really like to try this out. A noob in automation but i dont mind the challenge if you willing to assist.
Thank you so much for such valuable words.
Secondly each and every PCB file of my project is open. Just got www.easyeda.com/techiesms