Buy this complete project with all the Components already soldered on the PCB :- techiesms.com/product/all-in-one-home-automation-project/ Keep sharing, keep supporting 🙌🏻
I have created a code with espalexa that uses smartAP to configure wifi network manually which helps changing wifi network or password without taking out the esp32/8266 from the electric board. Also my code remembers the status of the switch incase of power cuts so that devices don’t go on/off automatically when power comes back.
I loved this project... Nice and interesting.. Only one suggestion ( not a complain)- your behaviour while saying STOP to Alexa was agressive. As people watching you, kindly refrain aggression. Small think but makes impact..
Great project bro, iv done the similar project with Alexa, but couldn't inclued fan but instead included 2 12v led strip (2ch) with dimmer (live feed back) incase wifi down i managed to include IR remote which controls everything inc dimming (also live feedback alexa app) 1. alexa controlled 8 swtch 2. Alexa controlled 2 led ch with dimming 3. Switch for over riding 4. IR remote controlling everything which is more convenient while stuck on seat and wifi down Things im planning to include 1. Thanx to you i need human presence detection using ble to shut lights down in area or i run out of my garage 2. Resume lights fan and audio system as soon as i come back 3. Couldnt use your method of ble because i dont want to use ear pod or ble smart watch coz i cannot use watch coz im a mechanic. 4. My plan is to use my SMART PHONE as ble device instead of smart watch but problem im facing is (phones MAC address constantly keeps changing) Also tried wifi sniffing (samething happens) 4. Include fan dimming tnx to you i'm referring this video If yr out their hearing me out thank you so much for the great information and your help would be greatly appreciated solving my problem 😊 Thankyou
This is one more best project in Home Automation and you are always ahead of others. I really appreciate your thoughtful mention on the library versions used to test this project, it shows how concerned you are on the success of this project at the subscriber's end. Thank you with great regards 🤗🤗
Hello Sir, I watch your every videos but I have some serious issues please read the whole paragraph then only you will get that what I exactly want to say. I wants to know which microcontrollers are used nowadays for Industrial and Domestic Automation (except PLC), such as microntrollers which are being used in Havells Smart Fan or Anchor IR remote Control Fan, or SYSKA Smart LED, etc all. All I wanted to know that these small smd based Smart Home Automation items by big brands uses which Microntroller for their smart products such as Fan, Bulb, Motor, Door Locks, etc. ??? Because as far as I have experienced AVR ATMega328P, PIC are not suitable for operating Inductive Loads (such as Fan or Solenoid Valve, Water Pumps , etc) as I have seen they produces back emf while on operation and the whole operation gets freezes down as a back emf creates disturbance for the microcontrollers and hence this way the whole code gets corrupted. I am seriously messed up with all these issues and till now I haven't found any relatable solution to this problem on the internet. I hope you have the answer to my question. I request you to please make a seperate video for me explaining all these Industrial Automation and Limitations of AVR, ATMega 328P, PIC, etc with troubleshooting of all these problems(especially on how to operate heavy Inductive loads on Arduino and how to troubleshoot back emf generated by motors). I have faced back emf issue on DC motors and Johnson Motors too, they were also not properly driven by Arduino and after 2nd or 3rd try they have also shown abnormal operation. I don't know why Arduino can't handle heavy current consuming DC motors with Motor Drivers or even AC motors on Relay. I faced the same issue on both !!! The whole circuit gets freezes down after 2nd or 3rd try and at last I get left with only 2 options, either re-upload the code or Restart the Arduino. Eagerly waiting for you response. Now you are the only last hope for me to get this sorted out. Please help me !!! 🙏🙏🙏
what happens when alexa decide you must buy there own products to do this rather than user made... then your house is useless and all in the hands of amazon.
All your diy projects are amazing, I love watching all your videos , but I m unhappy for one thing u were earlier uploading the gerber file of the projects no you don't. So plz upload gerber files too
Hey Sanju, I have an amazing project idea. It's controlling our appliances with internet. So basically we need a host like firebase. What if we use raspberry pi as a home server(to receive data from outside our house) and use Home assistant to trigger/send data to esp.😅
Its the matter of choice about which platfrom to use for Home Automation I also made home automation project using Home Assistant whose video is live on my TH-cam channel. And also I'll soon be publishing the video about Home Automation using Siri
It's a great breakthrough, thanks for the unique content. "How to control the ordinary BLDC fan (IR remote type) using the same control circuitry & Alexa?"
Curious to know if you are still operating your office with the same esp32 board . Wanting to know how reliable are these boards . Thank you for the video though. Do you sell those esp32 integrated boards ?
Your videos and content are very helpful ❤️. Please make a video for the home appliances control with the "Blynk IoT App + Alexa + IR sensor + Manual" THANK YOU SO MUCH SIR ❤️❤️❤️❤️❤️❤️❤️
Thanks for the effort, I have been using Blynk for my person iot use for about 5 years... will switch to Alexa just because its not necessary to have Internet for this.
Hi bro, can you suggest me for project and pcb with parts For home automation Req. 1 eprom function 2 work off line mode 3 if possible with out fan regulator 4 alexa and google support 5 new blynk iot support 6also physhycal switch support with feedback
Its a great project thanks for your efforts But I have some questions Is there any way to control with alexa and manually in addition to control it without Internet just a router and an application on phones? (if there please mention the app name) Other question can I add esp32 to stereo device for transmitting music and control it with WiFi and Bluetooth in the same time? Thanks
I have one problem understanding the code, In the code in the define section, You defined Default relay mode. Can you tell me what that is? I would like to know if I need to set multiple Default relay modes for controlling different relays. Waiting for your reply.
i tried using 10amp relay switches for office building, and the relays got damaged.. i used 30amp relay and its now working.. what probably seems to be the problem?
Achaa if I only want to control the appliances with only Alexa mobile application... Will this process work...? I mean while discovering the devices will it show in the mobile application?
Hello good time I program with esp32 in ThonnyIDE environment. When I upload and run the code, to continue coding, when I hit the stop button and ctrl C, the code and repl environment does not open for me, and there is no way to install the firmware on the board again. What is the method for this problem? Does using the Visual Studio Code environment solve this problem?
So you connected the AC Switches to the MCU circuit and then controlling the devices? If yes then 1. What if manual switch is off then someone turnes on the device using alexa. Then he/she turns on the manual switch(as the device is already on by alexa)
Hello sir I have connected wifi esp32, alexa and my phone to the same wifi like you says. But alexa doesn't find any new devices can you please help me with this?
No It doesn’t require any skills to be installed Please check your Alexa speaker and esp board are connected with same WiFi network If it still doesn’t work, turn off the Alexa and turn it on again
I used your sketch , upload to esp 32 dev kit V1, open serial monitor than noticed that esp 32 reboot again and again but fail to get IP address so that can't find the devices in Alexa App. please provide solution, I will be highly obliged. But your efforts have great value for IOT users. Thanks once again.
Sir can you help me with the ac connection for fan I am not able to understand how to give l Live wire connection to relay and fan help Me I have selected it as my final year diploma project
You should also add one more feature to it. You can add DTMF Controlling, So if there is no internet available on your phone or to the esp board, you could just simply call on the systems sim800l module and press 1 press 2 press 3.... to control your appliances. You may use TTGO board as it has both GSM and WiFi ability
Hi Brother, I found a video on TH-cam that you make a PCB based on ESP32. Can you make a custom design PCB for me based on ESP8266 ? My requirements are 5 thermocouples (Max 6675 K type Module) One DHT11 humidity sensor one Buzzer 7 relays can you please make one for me? I like ESP8266 as it is cheap and can connect to the web page. If you have any other option please let me know. Thanks
Hola me gustan muchos tu videos, el codigo que colocas para descargar es para usar ESP32 con la aplicacion Blik no directamente con alexa... Como puedo conseguir el codigo para controlar con alexa?
Hi Can't fine the code of Espalexa it redirects to a code of 4x1_feedback_circuit_v1 which is using but not the Espalexa code or Acebutton? pls share the code. thanks
Good project but not free u need to pay for internet ,no internet means no automation, there should be an option to control via app in case on no internet via Bluetooth r direct connection to esp board via Wi-Fi of esp
Can any one help me with the fan end ac connection to capacitor circuit and relay email me on urgent basis ready to pay for it because I have selected it as my diploma final year project
Buy this complete project with all the Components already soldered on the PCB :- techiesms.com/product/all-in-one-home-automation-project/
Keep sharing, keep supporting 🙌🏻
Sir, I request an IOT project for aquascape monitoring
I love the project, it's amazing to see how many appliance can be controlled with Alexa and for free
Yesss
Make one for your home as well
Happy making 🙌🏻
I have created a code with espalexa that uses smartAP to configure wifi network manually which helps changing wifi network or password without taking out the esp32/8266 from the electric board. Also my code remembers the status of the switch incase of power cuts so that devices don’t go on/off automatically when power comes back.
Hello
How can we do this can you please guide me.
Can you share your code
What is smartAP?
I also needed same implementation
Thanks!
Thank you so much 😊
I loved this project...
Nice and interesting..
Only one suggestion ( not a complain)- your behaviour while saying STOP to Alexa was agressive. As people watching you, kindly refrain aggression. Small think but makes impact..
Great project bro, iv done the similar project with Alexa, but couldn't inclued fan but instead included 2 12v led strip (2ch) with dimmer (live feed back) incase wifi down i managed to include IR remote which controls everything inc dimming (also live feedback alexa app)
1. alexa controlled 8 swtch
2. Alexa controlled 2 led ch with dimming
3. Switch for over riding
4. IR remote controlling everything which is more convenient while stuck on seat and wifi down
Things im planning to include
1. Thanx to you i need human presence detection using ble to shut lights down in area or i run out of my garage
2. Resume lights fan and audio system as soon as i come back
3. Couldnt use your method of ble because i dont want to use ear pod or ble smart watch coz i cannot use watch coz im a mechanic.
4. My plan is to use my SMART PHONE as ble device instead of smart watch but problem im facing is (phones MAC address constantly keeps changing)
Also tried wifi sniffing (samething happens)
4. Include fan dimming tnx to you i'm referring this video
If yr out their hearing me out thank you so much for the great information and your help would be greatly appreciated solving my problem 😊 Thankyou
Wow, this is what I wanna buy right away and make myself smarter
This is one more best project in Home Automation and you are always ahead of others.
I really appreciate your thoughtful mention on the library versions used to test this project, it shows how concerned you are on the success of this project at the subscriber's end. Thank you with great regards 🤗🤗
Thank you very much!
Very few people actually notice these small yet important details
Wow very brilliant. Can you connect the other esp chip to the same Alexa speaker
Hello Sir, I watch your every videos but I have some serious issues please read the whole paragraph then only you will get that what I exactly want to say.
I wants to know which microcontrollers are used nowadays for Industrial and Domestic Automation (except PLC), such as microntrollers which are being used in Havells Smart Fan or Anchor IR remote Control Fan, or SYSKA Smart LED, etc all. All I wanted to know that these small smd based Smart Home Automation items by big brands uses which Microntroller for their smart products such as Fan, Bulb, Motor, Door Locks, etc. ???
Because as far as I have experienced AVR ATMega328P, PIC are not suitable for operating Inductive Loads (such as Fan or Solenoid Valve, Water Pumps , etc) as I have seen they produces back emf while on operation and the whole operation gets freezes down as a back emf creates disturbance for the microcontrollers and hence this way the whole code gets corrupted. I am seriously messed up with all these issues and till now I haven't found any relatable solution to this problem on the internet. I hope you have the answer to my question.
I request you to please make a seperate video for me explaining all these Industrial Automation and Limitations of AVR, ATMega 328P, PIC, etc with troubleshooting of all these problems(especially on how to operate heavy Inductive loads on Arduino and how to troubleshoot back emf generated by motors). I have faced back emf issue on DC motors and Johnson Motors too, they were also not properly driven by Arduino and after 2nd or 3rd try they have also shown abnormal operation.
I don't know why Arduino can't handle heavy current consuming DC motors with Motor Drivers or even AC motors on Relay. I faced the same issue on both !!! The whole circuit gets freezes down after 2nd or 3rd try and at last I get left with only 2 options, either re-upload the code or Restart the Arduino.
Eagerly waiting for you response. Now you are the only last hope for me to get this sorted out. Please help me !!! 🙏🙏🙏
I love this video! My problem is a preexisting 2 level home. Not so easy to do the wiring.
what happens when alexa decide you must buy there own products to do this rather than user made... then your house is useless and all in the hands of amazon.
I love this project
God bless you for sharing this
You are an inspiration to me
Please make a video on how to program esp32-s3, tye arduino ide plug-in has already come
All your diy projects are amazing, I love watching all your videos , but I m unhappy for one thing u were earlier uploading the gerber file of the projects no you don't. So plz upload gerber files too
we are not publishing the Gerber file of only this project, as we are selling this on our website.
Hey Sanju, I have an amazing project idea. It's controlling our appliances with internet. So basically we need a host like firebase. What if we use raspberry pi as a home server(to receive data from outside our house) and use Home assistant to trigger/send data to esp.😅
Its the matter of choice about which platfrom to use for Home Automation
I also made home automation project using Home Assistant whose video is live on my TH-cam channel. And also I'll soon be publishing the video about Home Automation using Siri
It's a great breakthrough, thanks for the unique content.
"How to control the ordinary BLDC fan (IR remote type) using the same control circuitry & Alexa?"
Briliant job Sachin
Wow! Wonderful project bro,
Bro how to use usb muti modem
Into an GSM module
Hii bro...can you try making alexa with raspberry pi by which we can control home appliances
already made a video about making our own Alexa
Can we operate my home light n fan from other city with this project from my mobile alexa app?
Yes
But only if the Alexa smart speaker is active in the room where the router and other appliances are connected
Curious to know if you are still operating your office with the same esp32 board . Wanting to know how reliable are these boards . Thank you for the video though. Do you sell those esp32 integrated boards ?
Your videos and content are very helpful ❤️.
Please make a video for the home appliances control with the "Blynk IoT App + Alexa + IR sensor + Manual"
THANK YOU SO MUCH SIR ❤️❤️❤️❤️❤️❤️❤️
Thanks for the effort, I have been using Blynk for my person iot use for about 5 years... will switch to Alexa just because its not necessary to have Internet for this.
Which power supply you used for powering your esp board
May I request you to upload the schematics and pcb or the out Gerber for looking it deeply😇😁
Hi bro, can you suggest me for project and pcb with parts
For home automation
Req. 1 eprom function
2 work off line mode
3 if possible with out fan regulator
4 alexa and google support
5 new blynk iot support
6also physhycal switch support with feedback
Does this setup requires Alexa dot ? or can I use Alexa app on android > wifi> nodemcu ?
It's great but how you configure 24 appliances and around 5 esp with same network and or same code
Its a great project thanks for your efforts
But I have some questions
Is there any way to control with alexa and manually in addition to control it without Internet just a router and an application on phones? (if there please mention the app name)
Other question can I add esp32 to stereo device for transmitting music and control it with WiFi and Bluetooth in the same time?
Thanks
I love ur channel sir.... Ur videos very useful...every video I see very very useful sir.. Than u sir
Hi, bro.. can u add this on touch function.??
How to add eeprom when power failure to restore state of appliance
How can you support alexa routines triggers with this?
Hi mister. i tried checking the connection diagram on your website but i couldnt find the diagram. are you selling the wiring diagram ?
I have one problem understanding the code, In the code in the define section, You defined Default relay mode. Can you tell me what that is? I would like to know if I need to set multiple Default relay modes for controlling different relays. Waiting for your reply.
Nice bhai 👌👍
Sir i am use same hardware circuit on using firebase realtime through MIT app (manual, without internet, with internet) is it possible sir 🙏
i tried using 10amp relay switches for office building, and the relays got damaged.. i used 30amp relay and its now working.. what probably seems to be the problem?
Sir I love your all amazing videos...
But idon't understand which fan regulator connect this board/Module, for manulaly control fan speed???
Rply pls.
The one that has step controller
Just watch out this video to know more
th-cam.com/video/kMqcRaBRDRY/w-d-xo.html
Thank u Sir..👍👍
Achaa if I only want to control the appliances with only Alexa mobile application... Will this process work...? I mean while discovering the devices will it show in the mobile application?
it will work with diy echo dot or not
Sir.. how manual fan regulator is connected to project ? Share connection of that..
it's in the article you can check the link in description
@@techiesms Ok. Thanks sir
What is the cost of shipping (to india ) via jlc Pcb ?
Hello good time
I program with esp32 in ThonnyIDE environment.
When I upload and run the code, to continue coding, when I hit the stop button and ctrl C, the code and repl environment does not open for me, and there is no way to install the firmware on the board again.
What is the method for this problem? Does using the Visual Studio Code environment solve this problem?
Did I miss something??
How you are sending the manual button feedback to the mobile app?
You missed the code explanation part probably
So you connected the AC Switches to the MCU circuit and then controlling the devices?
If yes then
1. What if manual switch is off then someone turnes on the device using alexa. Then he/she turns on the manual switch(as the device is already on by alexa)
Hello sir I have connected wifi esp32, alexa and my phone to the same wifi like you says. But alexa doesn't find any new devices can you please help me with this?
Great video. Thank you
Great job ...but the article link is not opening?
It’s working now
Check it out..
Sir can we do it with google home?
Hi, can we use same code for node MCU esp8266 please reply
please upload a pictorial circuit diagram
I have problem in esp board D][WiFiClient.cpp:514] connected(): Disconnected: RES: 0, ERR: 128
how can i solve please help me
can you please provide the stencil of this project
My alexa is unable to detect wemos mini D1 having espalexa loaded on it . Does it require particular skill installed onto alexa?
No It doesn’t require any skills to be installed
Please check your Alexa speaker and esp board are connected with same WiFi network
If it still doesn’t work, turn off the Alexa and turn it on again
I used your sketch , upload to esp 32 dev kit V1, open serial monitor than noticed that esp 32 reboot again and again but fail to get IP address so that can't find the devices in Alexa App. please provide solution, I will be highly obliged. But your efforts have great value for IOT users. Thanks once again.
Can I use Nodemcu CP2102 to achieve this project? My ESP32 wroom seems not to work, probably I bought the fake one.
You have to select NodeMCU pins very carefully
Some of the pins won’t work either as Input or output
Sir can you help me with the ac connection for fan I am not able to understand how to give l
Live wire connection to relay and fan help Me I have selected it as my final year diploma project
Can you make a part 2 where we can add a screen as well like an old tablet whiic can be installed on wall and can control all devices
I’ll be doing that
Probably using Home Assistant
Stay tuned….
@@techiesms that would be awesome. Subscribed for the great video content.
Is there any specific reason why you don't use solid state relays in your switching projects
We are working on that project
The only reason as of now is, using SSR we are not able to dim the fan speed using capacitive dimming method
@@techiesms i think a triac would be the alternative option but I'll be waiting for that video
Tried with triac as well
But didn’t get results
You should also add one more feature to it.
You can add DTMF Controlling, So if there is no internet available on your phone or to the esp board, you could just simply call on the systems sim800l module and press 1 press 2 press 3.... to control your appliances. You may use TTGO board as it has both GSM and WiFi ability
I want only bare pcb or schematic file or Gerber
i want to order bare pcb without component. product is good but its price is much higher.
Sir.. Today i tried this code. But it says unable to compile for esp32. Any solution ?
Wiring Diagram of this Project is not given at website
It is available
Hi Brother,
I found a video on TH-cam that you make a PCB based on ESP32. Can you make a custom design PCB for me based on ESP8266 ?
My requirements are
5 thermocouples (Max 6675 K type Module)
One DHT11 humidity sensor
one Buzzer
7 relays
can you please make one for me? I like ESP8266 as it is cheap and can connect to the web page. If you have any other option please let me know.
Thanks
please share the gbl file for this project thank you
Great work
Can we use out side from our home in app
Yes
But only if the Alexa smart speaker is connected under same WiFi network in your home
Hola me gustan muchos tu videos, el codigo que colocas para descargar es para usar ESP32 con la aplicacion Blik no directamente con alexa... Como puedo conseguir el codigo para controlar con alexa?
Can I not use alexa speaker but only from phone ?
For initial process of adding device,
You’ll need the Alexa
so basically i would need another alexa speaker?
Sir drawing is so god
Whats the name off the app?
Will it work with mobile data like blynk...
yes
I got this Error: The program size is greater than maximum allowed
help me to resolve it
Good job sir
Why you haven't controller AC using alexa?
For that I'm thinking of using a smart IR Blaster
Hi Can't fine the code of Espalexa it redirects to a code of 4x1_feedback_circuit_v1 which is using but not the Espalexa code or Acebutton? pls share the code. thanks
Superb sir
Bro is turning my whole house lights on and off. TH-cam should censor the work Alexa
Nice sir 👍
Total How many voices command. Owner have to memorise. Please provide list of Voice commands .
It depends upon the owner only
I m also doing ur project at home secuss.. Only 10 devices use sir
then go for it....
If i buy this pcb,who will fix it
Fixing what?
Sir can you give coaching to me I am interested
Eprom memory ...?
How to control with Google home?
can you pleas provide it
I know we all know he is a good teacher but anyone disappointed to see that his beard is no more looks like he is getting old😔
Beard coming soon……
Good project but not free u need to pay for internet ,no internet means no automation, there should be an option to control via app in case on no internet via Bluetooth r direct connection to esp board via Wi-Fi of esp
it's amazing project , give me gerber file
Bro can u send grbr file bcz i'm from pakistan....thankx
Can any one help me with the fan end ac connection to capacitor circuit and relay email me on urgent basis ready to pay for it because I have selected it as my diploma final year project
🔥🔥🔥🔥🔥🔥again
Site very slow
👌👌
ધાસુ વિડીયો અત્યાર સુધીનો
Sound very bad
😂😂😂😂
👏👏🙏🙏