Love the song at the end - "just don't ask him the prices, how do you expect him to know where you live and shop? Haven't you got Google, or just ring the nearest shop" - gives an insight into what it must be like reviewing the comments here 🤣
I hate how there is US spec and everybody else in the world spec. made by manufacturers…lol! Like I wish Milwaukee would make black PackOut boxes for the US like for everyone! How crazy it is that the plastic boxes are so expensive!! It’s great that Makita is finally waking up to updating for the US! Great video Tools!!
I remember when an apprentice project was to make a portable toolbox and all the carpenters had custom made toolboxes. Not injection molded plastic made in Israel. I think I’ve outed myself as an old fart.
Yeah, I do not like the red packout boxes. They're kinda gaudy. I also think they stand out to thievery more. At the moment I most prefer systainers, they generally fit the work I do the best, but they're too goddang expensive for what they are.
There's a lot of plastic and standards met by the boxes. They are super spendy but I feel it's worth it. Buy it once and you're good. Buggar will last a very long time. Im team red as I was born into it. They have made my life sooo much easier. Love the organizational options, see through covers, close them if it's raining etc!
For the charger, I'd like to see a battery health mode where it doesn't long charge them to above 85% and then say you take it to the job site you can put it to charge to full and because it only needs to go from 85-100 they would charge up relatively quickly.
Coming to think of it… an LXT charging case like that would be amazing. I DIYd myself a makpac using Shadow Foam with a single charger and a six batteries. Not needing the charger would double the capacity! Also, did I see a massive external charging brick? That better have a proper place somewhere!
The boxes seem cool, but from the pictures nothing to get excited about, after using pack out and stuff for a while I realize I only like drawers, and it doesn't look like they did any, also they look like they are very difficult to stack, really like the tough built system
I’m not rough enough with my tools to think the space the Milwaukee packout takes up is worth it. I’m my opinion, they’re too bulky. There’s a lot of protective material on the corners that adds up to a decent amount of space when you start putting a few together. I did makpak for a while but now I’m on festool systainers. They fit tighter in my van and quite frankly look better. Not to mention they come with the tool.
I'm Makita through and through but I bought the Dewalt system for my boxes lmao Luckily I don't work on a job site so the number of people who will judge me is few.
Maktrak sounds ok, but I reckon Stakita would have sounded better 🤔 In fact, I propose we nickname it that anyway. 🤭 Great to see it made in the USA. I dont own any storage systems, but have used them and I find drawers are very handy.
Glad you now have a dedicated Li Ion storage box after your recent pyrotechnic escapades. The US is not alone. As far as I can tell Makita Australia still only has the DTD172Z as the "best" impact driver - no listing for a DTD173Z yet.
Still can't believe they dont have a simple 40v inverter. Most other brands have them. You plug in your 40v batteries and you have 120v. Not that big inverter that they have, a smaller inverter that you can swap batteries out like the Ryobi inverter.
At last!!!!!!!!!!!!!!!!!!!!!!!! snow blower i was writing them about this snow blower to make gosh they read.yes there is japanese makita site for ideas where you write nicely any tool needed or some idea:Dty makita ty now i can buy them and not think about how to make some makita blower from other tools. btw you may not seen all makita bttery types!! i live in eu near baltic sea. So one cosntruction worker who was constantly working in norway sad there is makita battery for winter!! he sad that battery is for winter as you can drop it in snow, work in minus celsius etc cold conditions. he sad o those batteries they look same as regular makita battery, but than you look more you find snowflkake sighn on battery. can it be insulated somehow? as it holds in cold condiotions, but he saw it on Norway only :)
Well lets see another out of touch manufacture make some over prices work boxes. Milwaukee did everyone dirty with the 169-199 drawer units and Toughbuilt , Dewalt, and Flex are to dumb to put a reasonable price on there boxes to compete.
Thats why i buy Qbrick , Polish system , yeah they admit they copied what was on market, their red HD ones have M8 insert , so you can bolt to those what you want. Qbrick drawer tower is round €200 , i have one of those and one Stanley TSTAK drawer towers, if it says DeWalt it cost more for same product. Also Metabo has had 8 battery charger for long time, aimed more to businesses.
I'll get it just to stop wasting time explaining that no I don't have a Milwaukee whatever in my packout bag, it was the best option at the time, but I'm closing on my first year in trades so I'm lucky to not be heavily invested in any one system yet 😊
Don't know if I like the Maktrak tilting everything på 90 degrees when you transport it, but will definitely not put my Makita tools in packout boxes. Thats blasfemi.
Maktrak is likely exclusive to North America for now, since the new chargers and inverters are all designed for makpak instead. And Europeans/Japanese prefer systainer anyway.
At this point, they're just paying lipservice to the Packout system. Packout is readily available worldwide and a proven product. Makita is again too late to the party and excluding markets; the makpacs are also archaic compared to Tanos T loc boxes.
I was worried they would just go with a systainer variant, I'm happy it looks more robust, as I was having doubts about the survivability of the systainer box with our harsh Canadian winter.
usa become 3 world country in my opinion long ago. its simple want to know what country your in look at fuel. Europe has 95 98 as premmium. while use has 93 as premium fuel. which is same as in africa where is very bad fuel. thats why makita ignoring usa as its waste of time. in usa people would simply steal stuff it happens only in 3 world countries like africa and nobody does anything. so makita now sends only old stuff in usa. for australia they already writing 95 same as 98 as premium which is not good as this means economy strugling loosing and buying opower cant make 95 as standart naming which should be. now about battery packs i think all batteries should be stored in fire proof storage away from house. Like rc guys who have fun they have solid state battery so they store them inbarbecue outside
BDS all the way! Thanks for the info; I'll let my gen-0-side supporting buddies in on the bad news about choosing Team Red. Free Palestine and peace for Lebanon! Buy Teal, vote Green!
Honestly I'm just starting out in trades, and after a few months I had to get myself the packout backpack to save my one shoulder, as the makita bag was falling apart due to putting to much stuff in it. Now I love that bag and it fit most of my daily tools, all Makita XGT, and the number of time I had to tell other trades that no i dont have a spare Milwaukee whatever... Just the bag because well Makita doesn't have any good option. That might total to over 2 hours... Same thing if i ever need my circulat saw wich is in T-stack box as it happened to be on sale when i got my saw.... Again no I dont have a dewalt whatever it's just the box, jeez guys. I might just wait to see if I get the MakTrack system since I'm not really invested in any one system yet.... And to cut down on that waste of time since peoples can't seams to understand a box is just a box, if it has one of the Big Brand Name on it 😅 Also god i swear Canada is the last place on earth to get new stuff.
Makita 40v Multi-Tool Review th-cam.com/video/SjU8YhNnYt8/w-d-xo.html BUY ONE: amzn.to/47CVuPl
The Makita I will NEVER Review th-cam.com/video/T7Cd-tvqxak/w-d-xo.html
Jon's Makita MR014G Review th-cam.com/video/hE8jaoJ0ogU/w-d-xo.htmlsi=IUY4EmtQG0rYWVDi
Makita 40v 1/2" Router Review th-cam.com/video/uHBXyxhdSw4/w-d-xo.html
Makita TD173D (XDT20) Review th-cam.com/video/YU9E8JKCow4/w-d-xo.html BUY ONE:
Makita BL4040F Tabless Battery Review th-cam.com/video/btr6vj8OEiY/w-d-xo.html
Makita 80v Jack Hammer Review th-cam.com/video/vcAHgep6u0k/w-d-xo.html
Can't wait to get those in Canada, still have to order the HEPA filter for my CL003G overseas for some reason
Love those custom songs for the channel
I hate to be the bad seed but I hate it. Cheezy AF. I much prefer the old chilled location shots of the Tools & Stuff channel name.
Cheezy AF is the whole point.
Love the song at the end - "just don't ask him the prices, how do you expect him to know where you live and shop? Haven't you got Google, or just ring the nearest shop" - gives an insight into what it must be like reviewing the comments here 🤣
I hate how there is US spec and everybody else in the world spec. made by manufacturers…lol! Like I wish Milwaukee would make black PackOut boxes for the US like for everyone! How crazy it is that the plastic boxes are so expensive!! It’s great that Makita is finally waking up to updating for the US! Great video Tools!!
I remember when an apprentice project was to make a portable toolbox and all the carpenters had custom made toolboxes. Not injection molded plastic made in Israel. I think I’ve outed myself as an old fart.
Yeah, I do not like the red packout boxes. They're kinda gaudy. I also think they stand out to thievery more. At the moment I most prefer systainers, they generally fit the work I do the best, but they're too goddang expensive for what they are.
@@nominalvelocity hell all the brands are expensive these days, it just comes down to which brands system fit us best…lol!
It’s funny because here in 🇬🇧 we wish we could have the red packout boxes but hilti won’t let them 🤣
There's a lot of plastic and standards met by the boxes. They are super spendy but I feel it's worth it. Buy it once and you're good. Buggar will last a very long time. Im team red as I was born into it. They have made my life sooo much easier. Love the organizational options, see through covers, close them if it's raining etc!
My prayer has been answered. Finally cordless water blaster 😍😍😍😍😍😍
th-cam.com/video/ciIUIDk0eXU/w-d-xo.html
It's their third or fourth one 😊
Drawer boxes, that’s it, it’s a mess moving box by box to get a screwdriver 😂
For the charger, I'd like to see a battery health mode where it doesn't long charge them to above 85% and then say you take it to the job site you can put it to charge to full and because it only needs to go from 85-100 they would charge up relatively quickly.
Coming to think of it… an LXT charging case like that would be amazing. I DIYd myself a makpac using Shadow Foam with a single charger and a six batteries. Not needing the charger would double the capacity!
Also, did I see a massive external charging brick? That better have a proper place somewhere!
I’ve got the StackTech boxes. Love them. Prefer them to pack out and it’s black and not attached to any power tool brand.
I want an xgt version of that jet wash
Yeah that would be nice😊
The boxes seem cool, but from the pictures nothing to get excited about, after using pack out and stuff for a while I realize I only like drawers, and it doesn't look like they did any, also they look like they are very difficult to stack, really like the tough built system
I’m not rough enough with my tools to think the space the Milwaukee packout takes up is worth it.
I’m my opinion, they’re too bulky. There’s a lot of protective material on the corners that adds up to a decent amount of space when you start putting a few together. I did makpak for a while but now I’m on festool systainers.
They fit tighter in my van and quite frankly look better. Not to mention they come with the tool.
Love the new theme song. 🤣
Idk why but they recently released a powerpack of 8x6ah, might be related to the charger.
Mac Attack 🍔🍟
😂
I'm Makita through and through but I bought the Dewalt system for my boxes lmao Luckily I don't work on a job site so the number of people who will judge me is few.
it would be cool if you could use the split-shaft pump attachment to feed the jetwash/powerwasher (even use AWS to start it remotely)
Need that song as my ringtone now
Maktrak sounds ok, but I reckon Stakita would have sounded better 🤔 In fact, I propose we nickname it that anyway. 🤭 Great to see it made in the USA. I dont own any storage systems, but have used them and I find drawers are very handy.
wait what was that patent image in the end 😳
xgt rear handle saw with aws, maybe?
@@Mikkel-Hansen maybe, but has to be some gen2 deal, curious to see what changed
Probably that beam saw I mentioned a few months back...
Just like the belt sander I mentioned came true, this might too.
I'd liked to check out the MakTrak stuff but it's like 5 years to late. Ended up with alot of red box already :(
Any idea if the td173 will be released in Australia? Love your work as always mate! Cheers
No sorry.
Glad you now have a dedicated Li Ion storage box after your recent pyrotechnic escapades.
The US is not alone. As far as I can tell Makita Australia still only has the DTD172Z as the "best" impact driver - no listing for a DTD173Z yet.
same for europe
You guys will get it one day... as soon as the 174 is announced.
@@ToolsAndStuffOFFICIAL 😅
And two years after the US gets the XDT20, Canada will finally get it... maybe
Still can't believe they dont have a simple 40v inverter. Most other brands have them. You plug in your 40v batteries and you have 120v. Not that big inverter that they have, a smaller inverter that you can swap batteries out like the Ryobi inverter.
yeah that would be nice
Of course, they are coming out with new boxes right after I got tired of waiting and invested into their makpac system and festool systainers😑
Epic songs
Any details about that high output 2.5ah xgt battery flashed at the end?
Do you think Makita will fallow Dewalts lead and have their own Grabo tool?
New rear handle worm drive saw? patent drawing ... the double bevel removable sole plate close cut saw? Mmmm ...
peace
i miss the fakita review and comparison
I recently did one for my Patreon Channel.
Can the water blaster pump volatile fluids? I see it and think flamethrower.
I bet they make an electric battery powered version of the big base box.
That would be cool
I`ve had the 4040F for more than 6 months in Norway, is it not widely availble?
Simpsons going to need 2 donkeys to haul that shit.
Next Video... Available Soon... th-cam.com/video/xkdxHM0z-7M/w-d-xo.html
makita has nice products for any task. any charger don't charge all at once kinda useless.
At last!!!!!!!!!!!!!!!!!!!!!!!! snow blower i was writing them about this snow blower to make gosh they read.yes there is japanese makita site for ideas where you write nicely any tool needed or some idea:Dty makita ty now i can buy them and not think about how to make some makita blower from other tools. btw you may not seen all makita bttery types!! i live in eu near baltic sea. So one cosntruction worker who was constantly working in norway sad there is makita battery for winter!! he sad that battery is for winter as you can drop it in snow, work in minus celsius etc cold conditions. he sad o those batteries they look same as regular makita battery, but than you look more you find snowflkake sighn on battery. can it be insulated somehow? as it holds in cold condiotions, but he saw it on Norway only :)
I think the battery box will appeal to the hyper organised tradies of the world who like to arrange pretty plastic boxes in their vans and utes
Well lets see another out of touch manufacture make some over prices work boxes. Milwaukee did everyone dirty with the 169-199 drawer units and Toughbuilt , Dewalt, and Flex are to dumb to put a reasonable price on there boxes to compete.
If makpack doesn’t do a decent drawer system they can keep it
Thats why i buy Qbrick , Polish system , yeah they admit they copied what was on market, their red HD ones have M8 insert , so you can bolt to those what you want.
Qbrick drawer tower is round €200 , i have one of those and one Stanley TSTAK drawer towers, if it says DeWalt it cost more for same product.
Also Metabo has had 8 battery charger for long time, aimed more to businesses.
I'll get it just to stop wasting time explaining that no I don't have a Milwaukee whatever in my packout bag, it was the best option at the time, but I'm closing on my first year in trades so I'm lucky to not be heavily invested in any one system yet 😊
Don't know if I like the Maktrak tilting everything på 90 degrees when you transport it, but will definitely not put my Makita tools in packout boxes. Thats blasfemi.
Lol, my packout has M12, lxt, and xgt. M12 because Makita rivet tools are impractical for me. Forgive me, hahaha.
Nothing about the XGT belt sander??
soon...
Maktrak is likely exclusive to North America for now, since the new chargers and inverters are all designed for makpak instead. And Europeans/Japanese prefer systainer anyway.
At this point, they're just paying lipservice to the Packout system. Packout is readily available worldwide and a proven product. Makita is again too late to the party and excluding markets; the makpacs are also archaic compared to Tanos T loc boxes.
@@SammyInnit the drawers are identical to the current sortainer tho
@@mvevitsisNo, the shitty original sortainers were replaced years ago.
@@robertrada4783 not really. There's only gwo system IV drawers If you want anything other than those layouts you have to use system III.
I was worried they would just go with a systainer variant, I'm happy it looks more robust, as I was having doubts about the survivability of the systainer box with our harsh Canadian winter.
Fuck the 40v shit. Most people have a ton 18v tools and arnt going to spend a fortune to re-kit
No-one said you had to.
@ToolsAndStuffOFFICIAL What i mean is, all Makita do now is push 40v stuff, no new 18v, like they forgot about it.
Did you watch the video?
Was that custom song at the start AI made?
usa become 3 world country in my opinion long ago. its simple want to know what country your in look at fuel. Europe has 95 98 as premmium. while use has 93 as premium fuel. which is same as in africa where is very bad fuel. thats why makita ignoring usa as its waste of time. in usa people would simply steal stuff it happens only in 3 world countries like africa and nobody does anything. so makita now sends only old stuff in usa. for australia they already writing 95 same as 98 as premium which is not good as this means economy strugling loosing and buying opower cant make 95 as standart naming which should be. now about battery packs i think all batteries should be stored in fire proof storage away from house. Like rc guys who have fun they have solid state battery so they store them inbarbecue outside
It's not a pressure washer. They're calling it just a washer.
packout is made in israel, thats why i had to get rid of mine
BDS all the way! Thanks for the info; I'll let my gen-0-side supporting buddies in on the bad news about choosing Team Red.
Free Palestine and peace for Lebanon!
Buy Teal, vote Green!
🤦♂
Honestly I'm just starting out in trades, and after a few months I had to get myself the packout backpack to save my one shoulder, as the makita bag was falling apart due to putting to much stuff in it.
Now I love that bag and it fit most of my daily tools, all Makita XGT, and the number of time I had to tell other trades that no i dont have a spare Milwaukee whatever... Just the bag because well Makita doesn't have any good option. That might total to over 2 hours... Same thing if i ever need my circulat saw wich is in T-stack box as it happened to be on sale when i got my saw.... Again no I dont have a dewalt whatever it's just the box, jeez guys.
I might just wait to see if I get the MakTrack system since I'm not really invested in any one system yet.... And to cut down on that waste of time since peoples can't seams to understand a box is just a box, if it has one of the Big Brand Name on it 😅
Also god i swear Canada is the last place on earth to get new stuff.
Жду новинки у нас в России, Красноярск
На Вятке быстрее появляются)