Williamson Gas Boiler Isn’t Heating Properly Step by Step Plumbing & Heating Service Call
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Let's Play a Game! Boiler Component Challenge. For every component you guess right, you earn $1.00, for every one you get wrong, you owe me $1.00. Ready? Williamson gas fired boiler isn't heating properly. Step by step instructions on running a plumbing and heating service call successfully.
Making The Trades Great Again & Giving Back To The Community: / channel
Need a website for your contracting business? Check out Footbridge Media for their amazing special on not only a website but SEO services for only $249/month! www.footbridge...
I use the HIK Micro B20 thermal camera to verify working equipment
amzn.to/3BkJC5Q and I wear Brunt pants and boots available here: bruntworkwear....
Tired of HouseCall Pro? Don't wanna be ripped off with ServiceTitan? Try ServicePal for free for 30 days! app.servicepal...
(You can thank me later)
Please take a moment and click that 👍 button! Much appreciate the support from the community.
Check out my Uncensored channel: / mikeypipesuncensored
Oval raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) ken@armoreddecal.com
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
UPDATED: February 13, 2023
PIPE DOCTOR FLEX FIT HATS only $40 each shipped USPS! Or 2 for $70
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
Donations Accepted:
PayPal: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Zelle: office@pipedoc.net
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes
C/O Pipe Doctor Home Services, Inc.
80 E Hawthorne Ave
Valley Stream, NY 11580
Join our team! PIPE DOCTOR HOME SERVICES is expanding to the great State of South Carolina!
WE ARE ACTIVELY HIRING:
SERVICE PLUMBERS
HVAC TECHNICIANS
DISPATCHERS
For our location in:
NORTH CHARLESTON, SC
I think this guy actually wants to learn and he seems very interested in learning the trade. He was able to name most of the parts unlike the other new hire.
@@PipeDoctor this comment didn't age well 🤪
A good apprentice carries pencil and pad and takes notes. Or in this day and age film and take pics, either way good job andre. Kid seems to have a good head on his shoulders.👍
I think that kid has a bright future in this trade, he wants genuinely wants to learn and seems to be willing to put in the work. Rare to find kids that age with that level of dedication. Keep yo the good work Andre
Your comments from a few days later contradict your original opinion 😬. I'm still trying to find the first one with the interview.
@@realSamAndrew yea I didn’t realize he claimed 4 years of experience, seemed like his 1st day on the job
Wow…I’m impressed with how much interest this kid is showing 👍👍
Mikey pipes hello,
Refreshing to see a guy that knows what he’s doing.
Since we don't really have boilers where I live, you and Steve Lav are my boiler instructors.
Yep! I too, have a bunch of worthless boiler knowledge!
Guess they were the lucky ones in Oceanside that didn’t have their basement flooded out from Sandy!
Nice to see some fresh faces in the “Mikey Pipes Team”! 👍
I am loving learning from this channel. I'm getting to see different failure modes and hackery in quantity on a wide variety of boiler systems. I'm an electrician and automation mechanic by original trade, but a job change has me starting on my HVAC journey. I am glad to have channels like yours that explain it well and still keep it fun. I know you'll keep up the boiler work, so keep making the videos! I'd also like to commend you as you are an excellent mentor.
I replaced a control board on a furnace I had to order it online because no plumbing supply store had it in my area it was 300 dollars for that board older furnaces always cost more for electronic parts because they are hard to find
I have the same boiler and went to check on the economy setting. It was all the way to maximum. I put it in the middle based on your recommendation. Read the manual and it claims it should be put on Maximum.
A good technician is aware of his surroundings, Your awesome 👌
Damn, glad he’s nailed the parts💰💰💰
Great channel,thanks Mikey pipes 👍
Thanks for watching and commenting
Good day Mike, next time you get a chance ask your apprentice safety question about the vent damper use/purpose. Thank you for your educational videos
Sure.
Mark up is usually 100 to 300%. People need to understand that not only are you installing the part but you are warranting it for 2 years parts and labor. I’m sure the parts manufacturers aren’t doing the same so that money comes out of your pocket. Great job as always. I wish you had an office in the SF Bay Area in California, I would buy a maintenance plan from you the next day!
He ain't no Hack, He get Stacks! Another fine job by the HVAC Wizard!! My rating is 4 Gold Mikey bracelets ⛓️⛓️
Отличное пояснение по ценам на запасные части 👀. Склад на колесах значит. Работа 👍, напарник с потенциалом.
Приятно посмотреть на вашу работу с другого континента 🇷🇺. Спасибо 😉
I like the comments. I like the comments about business practices. Business maybe done a little different than in other countries. I live in the same region as the video creator (producer). For real, and for real the product changes, discontinuing the part from manufacturers and service industry pricing. Without giving details Mikey gives great advice for prices adjustments as in the parts sold for Mikey Pipes' rolling warehouse replacement parts.
@@OLDMAYTAGDRYEROWNR Согласен с вами, спасибо 😉
We gotta get a nickname for Andre, Andre the Giant?😂😂Good luck!
So for so good with this new guy.
I adjust the economy for Max economy which is a 20 degree differential
Good teacher!! I have learned a lot... subscribing !
Apprentice Andre outperforming Newbie Nick so far
I like to put that vent damper as my first connection before the draft diverter
New guy seems eager to learn. Hope he's gonna work out for ya.
Great video. Educational. Love White Castle
Good Job guys Make the trades great again. He seems to have the feel for heating work.
Back to basics ! GREAT ! New guy seems eager to learn !
Absorb it up Andre mikey very knowledgeable, that's why I hired him. And he's a funny guy.
If you put a piece of black tape on the copper pipe you will get a proper temp from your thermal gun. Copper is shiny and it dosent register very well.
Great guy learning. Had the opportunity to be HVAC at 17 and didn’t want it at 68 love all your video.
@@PipeDoctor thanks Mikey I take as a very high compliment coming from a master plumber. 💪👍
Mike, if you had to buy a gas boiler natural drift for hot water hydronic baseboard what brand would you go with a Home is a one for the ranch 1300 square-foot
I charged 350.00 at 1:30a.m for batteries in a thermostat no heat. Got no problem with charging 👌
Gotta love people that can’t think for themselves
I saw your truck that morning while walking the dog, I thought it was the other Mike.
Corner of Lawrence n Henrietta.
I would've loved to shown you my hot box incorporated a block away.
Who holds the camera? That you guys can film and focus on fixing customer issues at the same time is remarkable and appreciated for us fans!
While the jury is still out on Nicky 6, I think Andree is gonna be a G for the Pipe Dr!
I like the new guy.
Hey Mikey, I recently got my house remodel and the contractor that install my Williamson boiler doesn’t know how to properly connect the lines. I’m from Queens, so it’s very heart warming to see these videos you post. When he turn on my basement my first floor heats and the basement, then to only find leaks 😢
Sounds like you need a professional. Where are you located?
In police lengo, they call that standing at a 45 degree and you mentioned, standing at a bladed position.
KU is the spot to be. Andre did good.
Keep him. A new hire that pays attention and takes notes is hard to find.
Yo Dre keep in this trade you’ll go far! Knowledge is power my brother and you’re learning from one of the greats Mikey f@cking pipes! Almost 70 degrees in CT today replaced a Weil McLain 299 ultra heat exchanger today, was a difficult but fun experience!! Got her done no leaks!
Thanks
That’s a tough one but I would have to say flordia Mikey pipes and if it is in flordia then what better time to throw a pool party then in the winter
your mind is amazing 🔥
Just fyi you’re reading your thermal imager wrong. Scale on the right is the full scale. Your center temp (cross hair fixed) is the third number on the upper left. That second floor pipe was reading like maybe 110, at least as far as I saw, it’s probably hotter than that since we can see the white/orange color showing. It’s getting a little confused by reflected vs emissive reading. It’s most accurate on that black pipe, since it’s going to be only emissive or almost only emissive, and the shiny brass and copper it’s going to be pretty off (emissivity, which yours discloses in the numbers on the bottom,mid have to dig up what it should be for copper or brass). Boilers definitely only getting to 130-140 though so the tridicator is probably right.
Better be Florida for the pool party!!
Finlly some one said it , First responder are everywhere on this World !!!! PS : not only cdc work they ass off !
Fantastic
Now this apprentice seems to be sharp.
Crazy video 🎉
WAIT!! Why did you install a Navien? Will there be a video? Detail, details. (Please Mr. Mikey Pipes Sir.)
He's not yet to the level of Kelvin and Godzilla, but maybe one day Andre will make it to the Mount Rushmore of apprentices. I can't wait for the Hamptons pool party Mikey! See you there.
You are awesome
MM lwco probe no paste or tape. Just put in tight no leaks.
Nice one
Really good video
New York Dammit. We need an invite.💪💪😎😎 Great video on heat. Think this guy is gonna make it. I would hire him.
@@PipeDoctor Probably way cheaper down there. What about South Carolina?
Corrosion-Protec powered anode rods are big advertisers on your channel Mikey…FYI
Soo good
That's a complicated heating system. Also, that house has really nice flooring.
Welcome Dr. Dre!
That’s a killer video 🤩
Can you suggest any books where I can learn about boilers and parts
Thanks Mike for sharing your wealth of knowledge! One question for you, on that boiler, the orange pex looking line with the shut off that was in the off position, was that the cold water line for the thermostatic mixing valve? Just curious
How does the mixing valve work in a hot water heating system. Were does the cooler come from for the mixing valve? Thank you.
Good ,😍😍😍😍
harvesting poison videos 😍
could you go from 3/4" to 1" baseboard to get it warmer in the house?
I have become your fan
Ney York pool party Mikie.
Mini splits from Mitsubishi 28 seer with h2i plus units. Boiling water for heat is dumb,mini splits heating and cooling...
You might have something in that young man.
Hey mike… would you hire a coned gas emergency troubleshooter with 10 years of experience fully NGA qualified and that also was an ase master mechanic/paramedic before coming to coned…he’s not a plumber by trade but he’s one hell of a problem solver
@@PipeDoctor sounds good … what’s the best way to contact you
That book ain't cheap, lol. I ordered one.
I ended up paying nothing for it on my Kindle unlimited, bonus !
PTFE and Teflon are one and the same.
👌👌👌👌👌
Andre deserves lunch
I was hoping someone in the comments section could help me out with something I've been noticing with my Goodman gas furnace.
The furnace ignites and heats the house for what seems like the correct duration. I've noticed after the flame goes out and the blower continues to run and not to long goes by and the furnace reignites and completes another heating cycle.
I find it weird that it is reattempting to heat the house before the fan turns off. The thermostat shoes the ambient temperature is the same as the desired temperature.
I've changed the flame sensor as well but the issue still remains.
@@PipeDoctor thank you for replying. The filters are brand new. Cheap ez flow filters too. The air ways appear to be clear too.
@@PipeDoctorJust witnessed it happen and the LED indicator gave 4 flashes. Chart says open high limit.
Tell them to call me FLG Home Performance
Mike, if the temperature gauge wasn’t connected to an electrical connection could you use Teflon then? For example on a tri gauge?
@@PipeDoctor Mikey…. Ptfe is Teflon….Teflon is a trademarked name… ptfe is a chemical compound abbreviation
😍😍😍😍
I also wouldn't Cary the correct wrench for the job I would have an adjustable wrench. Come on how many different sizes of fittings do you actually come across that you can't have a proper wrench
When will the next video come
😎😎😎😎😎
with which camera you make videos
Did you change the name from the Mikey Pipes nonsense her Channel
Is Peter OK? I've not seen him for awhile now. I've also not seen Dan. do any videos lately.
Cooler water temp
Well honestly way back in the day your living room was the funeral parlor
@@PipeDoctor yes I am actually aware that and honestly I wasn't worried then I'm still not now because I've been exposed to lead asbestos active and inactive mold biological pretty much anything other than radioactive LOL I've done a few stents with public and private environmental services
💥💥💥💥💥
Video editing software
🤗🤗🤗🤗🤗
You still owe Andre $9 you would have bought him lunch anyway.
Lmaooo
💫💫💫💫💫
I do not believe that economy dial on the control will do anything for you when you have the circulators running of the Taco control
Where are you from 🙊
I'm gonna puke. He don't get to hold the camera anymore unless he looks through its lens. I've got vertigo. Enjoyed the vid. Thank PD
Can i contact you ?
Wait I'm confused u don't use Teflon tape so u had a good ground but yet needed an external ground therefore rendering your entire speech about no Teflon useless?..... Granted pipe threads never need Teflon due to the tapered manner they are made
I guess u didnt retain the other guy lmao.
@@PipeDoctor amswer that email i sent ya Mike.
@@PipeDoctor i must of typed it in wrong there mike but was just s question. Can lennox tubing or pipe cutter be used to cut heavy wall pipe. Is all the email was.
🌝🌝🌝🌝🌝