Hornady LNL-AP 9mm part I (HD)
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- Please consider supporting Ultimate Reloader on Patreon: / ultimatereloader
-------------------------------------------
Important: See disclaimer at end of video description.
-------------------------------------------
Press Reviews available now! ultimatereloader.com/downloads
In this first video in a two part series you'll see how to set up and load 9mm ammunition on the Hornady Lock-N-Load AP Progressive reloading press, including setting the Hornady powder cop die. Check out all of the free reloading videos and resources on www.ultimatereloader.com
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this TH-cam channel (gavintoobe).
Any reloading data supplied on this TH-cam channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this TH-cam channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this TH-cam channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this TH-cam channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Hornady
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
I just got this press 4 months ago. I have been running a Rockchucker for years, so there were a few learning curves. It has proven to be a great press for my needs. Thank you for the great content.
Good vid Thanks
This is a great press for the money, I've been loading on this press for 6 years I easily have over 100K on it . Its a great press if your reloading many calibers because its so quick to change out the dies and shell plate. I currently reload. 10mm, 357sig, .45acp and .223. This press has a few short comings like the powder measure comes loose and the primer tube also works its way out. But once I worked a fix for that its very reliable and way cheaper than the Dillon 650 to do a caliber change. Plus the primer system is better than the 650. When comparing this to my 1050 with mark 7 including all the sensors, that cost me $5000. I have to say I rather have my 5 grand back. The 1050 is so fast I can spend one weekend and reload all the 9mm I need for the whole year 12K so it basically sits there all year. Anyway this press is a great buy for the money. Very Versatile, BTW I broke the handle twice and Horanady replaced it for Free twice. They also replaced the primer shuttle twice as it will wear out over time. No press is perfect but for the money and if your reloading many calibers this is the best.
Can you use lee dies in the hornady ap
@@Sllkl23 yes
Hi Gavin
I am interested in loading 9mm and 45ACP, I was impressed watching your video on loading the 9mm, can you tell me what componets that make up the system you are yousing in your 9mm Part 1 video so i can price out just what i will need for 9mm just as your using in your video.
Thank you.
Frank
Gavin, You seem to be a master on this press. I have a question about it...how do you stop the shellplate from "clicking" into place so hard on each cycle so the powder doesn't spit out of the case? I have now loaded appr.400 rounds with the same shellplate and the press has probably been cycled about 6-700 times. I keep the detents very clean and lubed, as I was directed by hornady...still doing it. What a mess everytime I load. Also, I used your AR15 video to build my first lower..Great stuff!
Can you release a list of all parts used in your set up? Everything used for proper 9mm loading start to finish.
Hey, im a little stuck with 2 different presses. The Hornady LNL-AP and the RCBS pro chucker 5. Right now they are both around the same price on amazon and dont know what to do!
I am mainly going to be using this for handgun loads like 9mm and 44 mag. Thanks!
I’m starting to lean more towards getting the Hornady LNL-AP I like the set up
It is awesome.
I have a hornady lnl press I've had issues with the powder thrower so much so i don't use i use rcbs chargemaster
You could make a video of the regulations for machine settings Hornady LNL?
I have a friend who is not able to get it running, lock it when you want to make progress.
A greeting from Spain (sorry if not well understood but is a translation from Spanish to English).
Do you use the baffle in your powder drop? I notice it isn't inside the tube when you added powder.
I would like to replicate your exact setup. what additional goodies do I need to buy besides the press? Thanks
hey where did you get the bracket to hold the bin on the front of your press? Thanks.
I just got this press and am currently reloading 9mm with hogdon hs-6 powder. i watched all of hornady's instructional videos and thoroughly cleaned each piece of the powder measure, twice, with hornady's one shot dry lube but the powder is still sticking to the internal components. did this every happen to you and if so do you have any suggestions on how to fix this?
You mentioned lubricating brass with one shot even with carbide dies, which I have, I can definitely agree with a benefit. But I’d like to see a video of how you lubricate them. Do you worry about getting it inside the cases? Or do you have a method that avoids this? I’m always confused and concerned about when lubricant left on a case is detrimental, I hear guys talk about cleaning cases again after resizing to remove lubricant. I don’t do this. A while ago I switched from Imperial sizing wax to Imperial dry neck lube to keep the button from sticking in case mouth. Lubricants confuse me
Been really thinking about getting one just two questions for you . What about deburring the inside and outside of your cases and checking for over all length after resizing ..
stephen kerr you don't have to worry about case stretching on straight walled cases like most pistol cases.
Gavin,
I also have the Hornady LNL-AP with the case feeder. I however have the hardest time getting the case feeder to drop only one 9mm case at a time. I have tried adjusting the system from the timing rod, to the plunger rod to the threaded feeder tube for hours. When I get it to where I think it works then it will drop multiple cases or drop none (all with the same adjustment). I can't seem to find its happy place. Every other caliber I reload I can get to drop just right, but just not 9mm. Could you share any tips? Thanks
Hi Gavin,
i just put my LNL together.I had only put the first die, deprimer and resizing. It was running ok and all suddenly, it is not indexing completely. Everytime i push the handle the star only spin half move. So, the cases don't go into the dies... any suggestion..?
Thank you for the video. Is this used only for 9mm? I need to buy one for 6.5 CM
Your setup comsists of the Hornady LNL AP Plus the Hornady Case auto case drop correct? Am I missing anything that does not come with the LNL Ap?
Is there any options for case feeding and projectile feeding that isn't the more expensive system... In other words are there cheaper options out there?
I noticed you did not use the bullet seater and taper crimp die. Is there a reason you did the seater only? Hornady recommend the taper crimp on 9mm and .45auto
This is a good video but I wish you would have assumed that we were first-time users and showed us how to properly set the dies for the first time.
Thanks for the video I'm thinking of getting this press since it seems a step up from a Lee but not insanely expensive
The Lock-N-Load AP is a great value, especially when you figure in the "Get Loaded" promo!
gavintoobe oh yes free bullets are always good
Hi Gavin, Can Lee dies work in this press? Actually...does the Hornady bushings fit the Lee dies? Anyone chime in please..thanks.
Yes, they work just fine, but are sometimes at their limits (screwed all the way in just about) in order to be in the right position.
@@Ultimatereloader
Gotcha, understood...carry on!
Hey, thanks for the great Vids.
Wow u sure uped your game from 10 years ago .
Sucks! Cant find that winchester 231 anywhere!
Has anyone else had a problem with loading the tubes like you see in this video? .. The press appears to come with a small and large tube set. Pretty sure I am using the right one for small primers (tried both of course) .. but the primers simply do not pickup. Seems simple enough .. but it just doesn't work. They don't pickup and fall right out like the plastic mouth is too wide. Anyone?
Just to be clear .. I am 100% a newb just getting started working out all the kinks.
Love your videos. I know this is an old video but I have a loadmaster press and would like to know which powder drop would you rather have installed on it. The lee auto drum powder drop or the hornady case activated powder drop on it. thanks alot
What is powder maysure?
Device that drops the exact amount of gunpowder (explosive) in the brass casing.
Gavin how many rounds can this safely produce in an hour
Depending on how efficient you are, between 600-1000.
Can you release a list of all parts used in your set up? Everything used for proper 9mm loading start to finish.
Check out this resource I created: ultimatereloader.com/getting-started-reloading/what-you-need-to-load-pistol/ there you go!