some of the first few test flights briefly on 6s and 4s un tuned in video volitant 191 4mm frame brotherhobby r5 2207 2700kv spedix 30a 3-6s dys f4 pro v2 tattu 1050 6s 75c dal 5050c
Can't wait to get your frame man! I've ordered BH R6 2207 2709kv... Will be playing around with 6S as well... I'll give some feedback. Any "gotchas" you want to share before I burn anything? :)
Should be great! Look forward to seeing some footage! Well the only way I could get it to fly reasonably well without insane vibrations was by limiting throttle to 80% - this is still blisteringly quick but other than that was pretty straight forward, be prepared to destroy many 6s lipos though lol I'm also only running 30a esc which I thought would never suffice but so far they have all survived!
@@VOLITANT I have a 45A ESC. I think it'll be all right. My motors, the screws on my motors, and my FC are softmounted. It's very well tuned so far for 4S and doesn't have any vibrations. The only thing is: weather is too crappy for me to test the 6S ATM... Been flying my whoop! That was a tight build though. Probably the tighter I've done. The camera is difficult to get through and the 2 standoff in the rear are not possible to mount with my ESC (ESC is 1mm too big). Anyway no big deal, just didn't put them. AUW of 420g ATM. With 1300mah 4S lipo.
Sorry for the late reply! Thanks! I'm running throttle reduced to 80% and I'm having to run very low P on 6s around 30-40 depending on the props and I and D gain is left stock, i can tune it far easier on triblades however 6s is much more suited to biblades at this kv.. I still haven't tuned properly yet as I'm trying a multitude of props bi and triblade
Can't wait to get your frame man!
I've ordered BH R6 2207 2709kv... Will be playing around with 6S as well... I'll give some feedback.
Any "gotchas" you want to share before I burn anything? :)
Should be great! Look forward to seeing some footage!
Well the only way I could get it to fly reasonably well without insane vibrations was by limiting throttle to 80% - this is still blisteringly quick but other than that was pretty straight forward, be prepared to destroy many 6s lipos though lol
I'm also only running 30a esc which I thought would never suffice but so far they have all survived!
@@VOLITANT I have a 45A ESC. I think it'll be all right.
My motors, the screws on my motors, and my FC are softmounted. It's very well tuned so far for 4S and doesn't have any vibrations.
The only thing is: weather is too crappy for me to test the 6S ATM... Been flying my whoop!
That was a tight build though. Probably the tighter I've done. The camera is difficult to get through and the 2 standoff in the rear are not possible to mount with my ESC (ESC is 1mm too big). Anyway no big deal, just didn't put them. AUW of 420g ATM. With 1300mah 4S lipo.
Hi, great video and amazing fly!
I’ve got about the same configuration, experience vibration at high throttle, would you mind sharing your PID?
Sorry for the late reply!
Thanks! I'm running throttle reduced to 80% and I'm having to run very low P on 6s around 30-40 depending on the props and I and D gain is left stock, i can tune it far easier on triblades however 6s is much more suited to biblades at this kv..
I still haven't tuned properly yet as I'm trying a multitude of props bi and triblade
VOLITANT FPV thanks