I’m was considering to get MC9 but I’m hearing a lot of problems with it. I’m considering TP9 sc or PDP compact or maybe still MC9 lol also M&P shield+ performance center(but it’s on the expensive end especially with accessories)
Thanks for the awesome review, as always! I have been watching your videos for several years now and they have always been extremely professional, informative, and very helpful!! Thanks!
In no way saying there isn't MC9s with issues but I've seen 4 different reviews where they ran the shit out of it without a single issue so l believe the problems with the MC9 are grossly over blown and bet the ones that have problems are well under 7 percent of them they have sold thousands of them if they sold 10,000 of them and 500 were returned for problems thats 5 percent these people act like 10,000 were sold and 8000 were returned because of issues
The only issue I had was that the magazines didn't drop very well. But after putting a couple of wraps of painters blue tape on a magazine and heating the handle and inserting the mag, and letting everything cool down. The mags dropped effortlessly. The pistol shoots extremely well, no jams, no stove piping, no nothing. As far as accuracy, I had great consistency in groups out to 25 yards, which for a micro conceal gun is great. But it's fun on the range as well. My teenage grandsons shot the pistol pretty accurately, especially for having never shot a pistol before.
The Canik is becoming like the Glocks in my collection: I can’t just get one! I think I have 8 Glocks(Glock 34,35,17G3,17G4,19G3,19G4,43,42). Now I have 3 Caniks(Mete SFX, Taran Tactical, Mete MC9). So far both my Glocks & Canik had zero malfunctions. I don’t understand when people keep assuming the MC9 or Caniks in general have tons of issues. I have 3 of them with thousands of rounds on each of them with zero issues. Either I keep getting lucky 🍀 or the issues reported are grossly exaggerated/inflated. Caniks are wonderful firearms. They remind me of my Walthers. 😊
Yeah, I just purchased this gun. (After some great reviews). Well, the honeymoon is over. I took it out today. Shot some basic range 9mm (Blazer "brass", 115gr) and also some Atlanta 115gr range ammo. So, not good. Stove pipes, failure to feed, Not ejecting, sometimes no slide hold open after last shot. This coming from a retired LEO of 20 years, firearms instructor at the local\state\ and federal level, graduate of the FBI HRT swat schools and I have never in my life had a gun so bad right out of the box as this Canik Mete MC9. It functions with some of the defensive 115 gr Altalnta, but that was it. I was going to make this my EDC carry, but not at the moment. The magazine not dropping out of the mag well is disappointing, (another video) So, I have contact Canik and requested advise on these issues. At this moment, I would not carry the Mete MC9, nor can I recommend this gun until these issues are resolved.
I sold mine a few weeks after purchase. It's quite literally the worst pistol I've ever owned. A Jam-O-Matic failure to return to battery. People are saying that the pistol is still completely unreliable after sending them back
Same here bought into hype as I love my elite full size and subcompact……but these are absolute garbage. They are sending cherry picked guns to reviewers. Go to any actual forums these guns have major issues
Ok, so here's an update. After working on my Mete MC9 (Polish feed ramp and chamber, sanding down the polymer frame slide area it is functioning like it should. Canik sent me a recoil spring, but I have not put it in because the work I did seem to work. I am still trying various ammo (Range and Carry) and is working as it should. No gun is 100% reliable including Glocks that I have carried most of my career. Don't count it out just yet. Canik should have done a better job before releasing this gun, it just hurt their reputation.@@cbr6864
Did anyone else notice how he avoided the 115 gr? This tool is "sprung" for the 124gr..If you want to run 115, you will need to replace the spring around the firing pin..$15 fix..
I'm looking to purchase my first firearm and i think i might go with the MC9. It's really hard to figure which firearm i want the most but this one is such a great value
Honest Outlaw gave it a great review as well. This little micro 9 is getting a try from me as well. Will it replace my sig? Probably not, but I’ll move it into my carry rotation for sure with everything it comes with and it’s dependability why not?
Im late, but i will say....i just bought the Mete MC9. I work at a gun store, so i got it for a good price. I have a Sig P365 XMacro compensated. I changed out the XMacro grip frame for a gray guns regular P365 grip frame, so it is super small, but still has that compensated slide. I love it. Shoots great......with frame, $1000 dollar gun. Mete MC9 i paid $360 for.....trigger is hands down better than the sig, by a lot. I had to sand down the front grip a bit, because it was stupid aggressive and dug into my fingers, but id have to say, ill carry the MC9 over the Sig any day.....and im a Sig fanboy 🤣
mine fail to feed they sent a new recoil spring. shot about 75 rounds 124gr fmj and jhp no issues until a a round got caught on the edge of the feed ramp. tried different rounds/magazines and same happened. put them in a different gun and shot normally. it's unreliable unsafe and now IMO components are mismatched. i read they replace striker spring, recoil spring, and now different feed ramps on barrels. not going to do that piece by piece. i'll send it back let them get it right and use my shield plus PC until...
Hi friend, I have a Sig Sauer p365X, I saw your video and it helped me to choose it. Now I want a 2nd spare weapon, what do you think about Canik, Mete Mc9, I hear problems in the barrel ramp and recoil spring. Do you recommend the Mete Mc9 or a sar 9sc, Taurus G2c or G3c or another option? Keeping a small size like my Sig Sauer P365X
This is the gun I wanted at the price I wanted, but it can’t do it. Based on other review here and on forums, this MC9 is problematic and I’m thinking the issue is QC, and not actual engineering. Wish Canik would address these issues and make this gun reliable!
In no way saying some MC9s don't have some issues but l just watched 4 reviews on the MC9 where they ran the shit out of it with absolutely no issues 600 rounds through mine it's been flawless will it be flawless forever probably not even with good care and maintenance once you firer 3000+ rounds through a firearm things will break maybe not major things but small things
@@gloriamaletta8667 All the review I originally saw all said the MC9s were fantastic.. There were a few that had FTF or RTB issues, right off the bat, but the reviewers were saying it probably just needed breakin. Well, those that gave fantastic reviews, the ones I saw, eventually started saying they had problems. The issues seem to come up between 500-1000 rounds. There are very few reviewers I've seen that didn't eventually change their mind on it's reliability. It's almost impossible to see a reviewer say they would recommend the MC9 as a EDC gun. The ones that did early on seems to all have changed their mind too. What I'd like to see now are new reviews with guns that were built say starting in July, because I've read that Canik has made some changes to fix the issues from the early pistols, but I think that was just speculation as to whether Canik has done anything or not.
@@crabjoe mine has a born date of 4-27-2023 l have a SIG P365 - Stoeger STR 9mc gen2 - Kimber R7 Mako - CANIK MC9 in my opinion out of all these micro 9s the Canik is just as good and dependable and reliable as all these micro 9s with 600 rounds of 115 and 124 grain brass FMJs and JHPs even 50 rounds of Federal 115 grain +P+ not one problem so far with it it has been flawless shoots and handles more like a compact than a micro
@@crabjoe the only upgrade l am aware of that Canik did and it's hear say is new ones have polished feed ramps the first thing l do when l get a new semi auto pistol regardless if it's polished or not from the factory is polish the living shit out of the feed ramp with mothers aluminum polish using a green scuff pad first and moving to a Q-tip the metal slide tabs are done this way also this usually eliminates break-in issues and I'm not satisfied until it's smooth as silk it takes about a half hour of rubbing the shit out of it very rarely do l have any problems with new semiautomatic pistols even my SIG P320s and Walther PPQ and P99 and P99c get this done to them first new thing before cleaning them my Canik MC9 feels and shoots very similar to my Walther P99c gen2
Mines ran flawlessly,only thing i did is polish the feed ramp with mothers till a very shiny surface,but i think even if I didn’t polish it would have run normal,very good shooter and not snappy at all
Why would i spend 400 on a gun thats a failure and has to be fixed. This gun should have been recalled. MC9 a dangerous jamming gun. Their guns are normally great but this one NO! All these videos saying how good it is A JOKE!
Sorry you are having so many problems. Mine works/fires flawlessly. I guess I'm one of the lucky ones. My grandsons who have never shot pistols before, loved shooting it, too.
The gun is pure garbage! I own the elite full-size and subcompact but this gun is a useless brick. I bought into the hype…..gun will not go into battery also constant FTFs. Don’t buy into the hype these reviews are sent cherry picked firearms. Go onto any forum dedicated to Canik you will see post after post about issues. They will simply send you a new recoil spring which does nothing. Buyer beware!
They did have problems with the first versions of the gun, bought mine in 01/24, and have had no issues with shooting the pistol. I did fix the magazine not dropping, and that was a 15-minute easy fix.
JUNK I’m on my second mc9 that canik sent and still issues! I can’t even sell this pos to anymore! I will never buy their crap again. Return to battery issues Who the hell are their engineers because they need to be fired
Hi friend, I have a Sig Sauer p365X, I saw your video and it helped me to choose it. Now I want a 2nd spare weapon, what do you think about Canik, Mete Mc9, I hear problems in the barrel ramp and recoil spring. Do you recommend the Mete Mc9 or a sar 9sc, Taurus G2c or G3c or another option? Keeping a small size like my Sig Sauer P365X
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
Got mine home today!!!! LOVE IT!!!
This man loves every gun out there
They pay him to
Yep!
Truly like canik products, own each one accuracy is truly remarkable and reliable. Mod2, sc an mc.
I own a Canik TP9SF, is an excellent gun. I am looking forward to buy a Mete MC9.
Bought mine yesterday. Going to the range in 3 days for first shots! Super excited.
I’m was considering to get MC9 but I’m hearing a lot of problems with it. I’m considering TP9 sc or PDP compact or maybe still MC9 lol also M&P shield+ performance center(but it’s on the expensive end especially with accessories)
Great video and the gun is one of my new edc also ran about 500 through it no problems at all. Keep these great videos coming my way have a good day.
Thanks for the awesome review, as always! I have been watching your videos for several years now and they have always been extremely professional, informative, and very helpful!! Thanks!
In no way saying there isn't MC9s with issues but I've seen 4 different reviews where they ran the shit out of it without a single issue so l believe the problems with the MC9 are grossly over blown and bet the ones that have problems are well under 7 percent of them they have sold thousands of them if they sold 10,000 of them and 500 were returned for problems thats 5 percent these people act like 10,000 were sold and 8000 were returned because of issues
At my shop they never heard of any of the issues. I bought one last week. I might go to my club today for a quick 50rds
@@paulg1109 over 1200 rounds absolutely no issues is now my concealed carry
same here@@gloriamaletta8667
@@paulg1109 they've changed at least 3 components in the newer guns
The only issue I had was that the magazines didn't drop very well. But after putting a couple of wraps of painters blue tape on a magazine and heating the handle and inserting the mag, and letting everything cool down. The mags dropped effortlessly. The pistol shoots extremely well, no jams, no stove piping, no nothing. As far as accuracy, I had great consistency in groups out to 25 yards, which for a micro conceal gun is great. But it's fun on the range as well. My teenage grandsons shot the pistol pretty accurately, especially for having never shot a pistol before.
The Canik is becoming like the Glocks in my collection: I can’t just get one! I think I have 8 Glocks(Glock 34,35,17G3,17G4,19G3,19G4,43,42). Now I have 3 Caniks(Mete SFX, Taran Tactical, Mete MC9). So far both my Glocks & Canik had zero malfunctions. I don’t understand when people keep assuming the MC9 or Caniks in general have tons of issues. I have 3 of them with thousands of rounds on each of them with zero issues. Either I keep getting lucky 🍀 or the issues reported are grossly exaggerated/inflated.
Caniks are wonderful firearms. They remind me of my Walthers. 😊
great little gun..
Good review.
Yeah, I just purchased this gun. (After some great reviews). Well, the honeymoon is over. I took it out today. Shot some basic range 9mm (Blazer "brass", 115gr) and also some Atlanta 115gr range ammo. So, not good. Stove pipes, failure to feed, Not ejecting, sometimes no slide hold open after last shot. This coming from a retired LEO of 20 years, firearms instructor at the local\state\ and federal level, graduate of the FBI HRT swat schools and I have never in my life had a gun so bad right out of the box as this Canik Mete MC9. It functions with some of the defensive 115 gr Altalnta, but that was it. I was going to make this my EDC carry, but not at the moment. The magazine not dropping out of the mag well is disappointing, (another video) So, I have contact Canik and requested advise on these issues. At this moment, I would not carry the Mete MC9, nor can I recommend this gun until these issues are resolved.
I sold mine a few weeks after purchase. It's quite literally the worst pistol I've ever owned. A Jam-O-Matic failure to return to battery. People are saying that the pistol is still completely unreliable after sending them back
Same here bought into hype as I love my elite full size and subcompact……but these are absolute garbage. They are sending cherry picked guns to reviewers. Go to any actual forums these guns have major issues
Ok, so here's an update. After working on my Mete MC9 (Polish feed ramp and chamber, sanding down the polymer frame slide area it is functioning like it should. Canik sent me a recoil spring, but I have not put it in because the work I did seem to work. I am still trying various ammo (Range and Carry) and is working as it should. No gun is 100% reliable including Glocks that I have carried most of my career. Don't count it out just yet. Canik should have done a better job before releasing this gun, it just hurt their reputation.@@cbr6864
Did anyone else notice how he avoided the 115 gr? This tool is "sprung" for the 124gr..If you want to run 115, you will need to replace the spring around the firing pin..$15 fix..
At 14:14 he eludes that he's switch ammo..idk.
I'm looking to purchase my first firearm and i think i might go with the MC9. It's really hard to figure which firearm i want the most but this one is such a great value
Looks like a nice gun.. But does it come with a thumb safety??. And with 9mm so snappy.. and maybe come in a less snappy .380 version??
Just shot one at the range and had a light primer strike. That was enough to make me press the pause button on a purchase.
Honest Outlaw gave it a great review as well. This little micro 9 is getting a try from me as well. Will it replace my sig? Probably not, but I’ll move it into my carry rotation for sure with everything it comes with and it’s dependability why not?
for everyday/all around sig xl is great, but would i cry if i had to use my caniks in same role instead? heck no!!!!
Did you have to sign an nda???
Im late, but i will say....i just bought the Mete MC9. I work at a gun store, so i got it for a good price.
I have a Sig P365 XMacro compensated. I changed out the XMacro grip frame for a gray guns regular P365 grip frame, so it is super small, but still has that compensated slide. I love it. Shoots great......with frame, $1000 dollar gun.
Mete MC9 i paid $360 for.....trigger is hands down better than the sig, by a lot. I had to sand down the front grip a bit, because it was stupid aggressive and dug into my fingers, but id have to say, ill carry the MC9 over the Sig any day.....and im a Sig fanboy 🤣
mine fail to feed they sent a new recoil spring. shot about 75 rounds 124gr fmj and jhp no issues until a a round got caught on the edge of the feed ramp. tried different rounds/magazines and same happened. put them in a different gun and shot normally. it's unreliable unsafe and now IMO components are mismatched. i read they replace striker spring, recoil spring, and now different feed ramps on barrels. not going to do that piece by piece. i'll send it back let them get it right and use my shield plus PC until...
Hi friend, I have a Sig Sauer p365X, I saw your video and it helped me to choose it. Now I want a 2nd spare weapon, what do you think about Canik, Mete Mc9, I hear problems in the barrel ramp and recoil spring. Do you recommend the Mete Mc9 or a sar 9sc, Taurus G2c or G3c or another option? Keeping a small size like my Sig Sauer P365X
MC9, they have fixed all the issues on the newer ones!
@@22addict40 Here in Peru, they sell Canils mete mc9 with a manufacturing date of August 2023, have the problems been resolved since that date?
i love mine
Is that OD green? I have the fde and black, but that looks awesome
I have two and I love tham
My question is the holster that comes in the box is it ambidextrous
i'm gpong to get this and the mete sft and sfx
This is the gun I wanted at the price I wanted, but it can’t do it. Based on other review here and on forums, this MC9 is problematic and I’m thinking the issue is QC, and not actual engineering.
Wish Canik would address these issues and make this gun reliable!
In no way saying some MC9s don't have some issues but l just watched 4 reviews on the MC9 where they ran the shit out of it with absolutely no issues 600 rounds through mine it's been flawless will it be flawless forever probably not even with good care and maintenance once you firer 3000+ rounds through a firearm things will break maybe not major things but small things
@@gloriamaletta8667 All the review I originally saw all said the MC9s were fantastic.. There were a few that had FTF or RTB issues, right off the bat, but the reviewers were saying it probably just needed breakin. Well, those that gave fantastic reviews, the ones I saw, eventually started saying they had problems. The issues seem to come up between 500-1000 rounds. There are very few reviewers I've seen that didn't eventually change their mind on it's reliability. It's almost impossible to see a reviewer say they would recommend the MC9 as a EDC gun. The ones that did early on seems to all have changed their mind too. What I'd like to see now are new reviews with guns that were built say starting in July, because I've read that Canik has made some changes to fix the issues from the early pistols, but I think that was just speculation as to whether Canik has done anything or not.
@@crabjoe mine has a born date of 4-27-2023 l have a SIG P365 - Stoeger STR 9mc gen2 - Kimber R7 Mako - CANIK MC9 in my opinion out of all these micro 9s the Canik is just as good and dependable and reliable as all these micro 9s with 600 rounds of 115 and 124 grain brass FMJs and JHPs even 50 rounds of Federal 115 grain +P+ not one problem so far with it it has been flawless shoots and handles more like a compact than a micro
@@crabjoe the only upgrade l am aware of that Canik did and it's hear say is new ones have polished feed ramps the first thing l do when l get a new semi auto pistol regardless if it's polished or not from the factory is polish the living shit out of the feed ramp with mothers aluminum polish using a green scuff pad first and moving to a Q-tip the metal slide tabs are done this way also this usually eliminates break-in issues and I'm not satisfied until it's smooth as silk it takes about a half hour of rubbing the shit out of it very rarely do l have any problems with new semiautomatic pistols even my SIG P320s and Walther PPQ and P99 and P99c get this done to them first new thing before cleaning them my Canik MC9 feels and shoots very similar to my Walther P99c gen2
Mines ran flawlessly,only thing i did is polish the feed ramp with mothers till a very shiny surface,but i think even if I didn’t polish it would have run normal,very good shooter and not snappy at all
I'm getting one for $224, that's with tax. I hope I got an amazing price.
No matter what, i love all my caniks. Wasn't made by the God, problems for human mades...
is this a rebranded channel or a knockoff?
#ShillZone
Why would i spend 400 on a gun thats a failure and has to be fixed. This gun should have been recalled. MC9 a dangerous jamming gun. Their guns are normally great but this one NO! All these videos saying how good it is A JOKE!
Sorry you are having so many problems. Mine works/fires flawlessly. I guess I'm one of the lucky ones. My grandsons who have never shot pistols before, loved shooting it, too.
The gun is pure garbage! I own the elite full-size and subcompact but this gun is a useless brick. I bought into the hype…..gun will not go into battery also constant FTFs. Don’t buy into the hype these reviews are sent cherry picked firearms. Go onto any forum dedicated to Canik you will see post after post about issues. They will simply send you a new recoil spring which does nothing. Buyer beware!
They did have problems with the first versions of the gun, bought mine in 01/24, and have had no issues with shooting the pistol. I did fix the magazine not dropping, and that was a 15-minute easy fix.
JUNK
I’m on my second mc9 that canik sent and still issues! I can’t even sell this pos to anymore! I will never buy their crap again. Return to battery issues
Who the hell are their engineers because they need to be fired
Shit pistol compared to my Glock
Used another man's review 👎🏽
Hi friend, I have a Sig Sauer p365X, I saw your video and it helped me to choose it. Now I want a 2nd spare weapon, what do you think about Canik, Mete Mc9, I hear problems in the barrel ramp and recoil spring. Do you recommend the Mete Mc9 or a sar 9sc, Taurus G2c or G3c or another option? Keeping a small size like my Sig Sauer P365X