Fiberon Fasteners: Premium Hidden Grooved Systems
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Fiberon and CAMO create products for the consumer who wants to build a better deck and have an unparalleled install experience. We offer pre-assembled, no partial installation, one-step placement hidden fasteners for grooved decking.
Learn more about Fiberon EDGE, EDGEX, EDGEXMETAL and STARTER Clips here: www.fiberondec...
I use a ratchet strap to pull the boards together. Seems to work well
Can you adjust the gap size? How do you secure you last board if it doesn't measure out right and you have to rip it?
Good morning,
Thanks for reaching out! The clips are designed to install a 3/16" gap between the boards for ease of installation, but you can adjust the spacing if you wish to ensure a full board at the end. Larger gaps will require the boards to be face screwed into place, as will the last board on the outside edge, whether ripped or full. We do offer our ProPlug screws that have matching plugs that are installed on top of the screws to conceal them and maintain the fastener free appearance.
Hope this helps!
Thanks for the demonstrations!
my deck boards seemed bowed laterally Hard to get the clips set and screwed down without pulling the boards together...
@@jstone1211 try pulling together with ratchet straps wrapped around the rim joist
Thanks, I read another commenter that suggested that approach… going to give it a try. Always more difficult without help…
@jstone1211 i used three total one on each end and one in the middle. Did each slowly and gradually with the fasteners in place. I was able to do this solo
Any tips on getting the Camo Lever to lock on the joist when installing decking at an angle to the joist?
Thank you for reaching out with your question. We have included a link to a video to show how the Camo lever can assist with installing boards on a diagonal below:
facebook.com/camofasteners/videos/camo-lever-on/826573408076377/
Hope this helps!