Hello, about 20 days ago I acquired the Wolverine Pro.I have used it with a SanDisck 16gb, 95mb/s card, with poor results. The upper part of the image trembled in a fluctuating way, that is, at times yes, at times not, it seemed like a loop. Researching on the net, I found some mechanical type recommendations and I have tried some, without any modification in the results. Intuitively one would say that it is a mechanical problem, but without any other alternatives, I tried using a SONY TOUGH card, 32gb 300mb/s, G, and to my surprise, the result is excellent!!! I wanted to tell you about my experience, since it is something that can be useful to many people. Take advantage of it!!! A cordial greeting from Argentina!
Boy, I felt my blood pressure going up while I watched this video. Cluster size ? FAT 32 ? sure the poor average halfwit like myself knows all of this. These bloody SD cards are more than a pain in the arse, and it repeats itself when you try to fit them to crash cams as well !. Thank you for the informative video.
Yes that tech stuff can get complicated even though I have used computers since my Commodor 64 I bought in 1987. I still find it a challenge sometimes.
I am glad the video help your mothers Christmas gift. Have you seen the films you copied afterwards, I suspect she enjoyed them very much. We in our family usually play some of our super8films on Christmas day or shortly there after. My parents had eight kids so we all find it fun. Happy New Year
Do you know how to fix a Wolverine pro that will not let you adjust or see. The screen is blank. I have gotten it to play now but although the light is on where the film advances,it does not show on the view screen. Please help
I wonder if you were to put the cord into the TV out that came with the machine if it then shows up on the tv screen. I am writing about the plug jack in the back of the Wolverine Pro machine that says TV out. At least then you can adjust the screen because it is supposed to then show up on your TV. I do know when you put this cord in, the small screen goes blank, as it sends the signal to the TV. Hopefully if you get lucky whet you pull the cord out the small screen will then reappear. I am thinking it may reset it for you. I am coming out with a new video this week where I bring the screen into the computer and you will see in this video how the screen turns off when it sends the signal to the computer. This video is not about that, but I show that I am sending the picture to the computer. Hope that helps you.
@@super8tovideo it worked. After I unplugged the wire it shows on the screen and I have access to the editing part. Now I am working on getting the computer to read the scan disk. Any suggestions?
@@gibsondianne76112 I usually use a SD card reader. They are extremely cheap You put the SD card in the reader and then connect it to the usb hub. Here is a link to a reader on Amazon but they can be bought at most electronic stores. I am sending this link but there are infinite versions of readers. You may already have one sending link so you know what it may look like not that it is my favorite to me they all work good. Here is the link This may be an affiliate link I really don"t know if it is. Once you see it you will probably find you already have something similar. amzn.to/3wJOuzT
Hi, I have one of the white box 8mm converters and am getting the error message 'please connect power supply' when i start to scan and it will not start scanning. The machine is powered up and the screen is lit. Can you help please. Regards Steve
I wish I could help but I have never seen this message. I wonder if there is any chance if you were to connect the cable to watch the screen on a tv if it might reset something and then maybe it would work. It is a long shot but I can not think of anything else unless there is something wrong with the power supply like it is giving 9 volts instead of 12 volts something like that. Sorry wish I could help.
Hello, about 20 days ago I acquired the Wolverine Pro.I have used it with a SanDisck 16gb, 95mb/s card, with poor results. The upper part of the image trembled in a fluctuating way, that is, at times yes, at times not, it seemed like a loop.
Researching on the net, I found some mechanical type recommendations and I have tried some, without any modification in the results.
Intuitively one would say that it is a mechanical problem, but without any other alternatives, I tried using a SONY TOUGH card, 32gb 300mb/s, G, and to my surprise, the result is excellent!!!
I wanted to tell you about my experience, since it is something that can be useful to many people. Take advantage of it!!!
A cordial greeting from Argentina!
Boy, I felt my blood pressure going up while I watched this video. Cluster size ? FAT 32 ? sure the poor average halfwit like myself knows all of this. These bloody SD cards are more than a pain in the arse, and it repeats itself when you try to fit them to crash cams as well !. Thank you for the informative video.
Yes that tech stuff can get complicated even though I have used computers since my Commodor 64 I bought in 1987. I still find it a challenge sometimes.
Can you do a review of all 4 digitizers to compare
Thank you! You saved my Christmas gift to my mother. Cheers!
I am glad the video help your mothers Christmas gift. Have you seen the films you copied afterwards, I suspect she enjoyed them very much. We in our family usually play some of our super8films on Christmas day or shortly there after. My parents had eight kids so we all find it fun. Happy New Year
lets be honest all those machines are made at same source and just get a few cosmetic changes. they will be the same inside
Do you know how to fix a Wolverine pro that will not let you adjust or see. The screen is blank. I have gotten it to play now but although the light is on where the film advances,it does not show on the view screen. Please help
I wonder if you were to put the cord into the TV out that came with the machine if it then shows up on the tv screen. I am writing about the plug jack in the back of the Wolverine Pro machine that says TV out. At least then you can adjust the screen because it is supposed to then show up on your TV. I do know when you put this cord in, the small screen goes blank, as it sends the signal to the TV. Hopefully if you get lucky whet you pull the cord out the small screen will then reappear. I am thinking it may reset it for you. I am coming out with a new video this week where I bring the screen into the computer and you will see in this video how the screen turns off when it sends the signal to the computer. This video is not about that, but I show that I am sending the picture to the computer. Hope that helps you.
@@super8tovideo it worked. After I unplugged the wire it shows on the screen and I have access to the editing part. Now I am working on getting the computer to read the scan disk. Any suggestions?
@@gibsondianne76112 I usually use a SD card reader. They are extremely cheap You put the SD card in the reader and then connect it to the usb hub. Here is a link to a reader on Amazon but they can be bought at most electronic stores. I am sending this link but there are infinite versions of readers. You may already have one sending link so you know what it may look like not that it is my favorite to me they all work good. Here is the link This may be an affiliate link I really don"t know if it is. Once you see it you will probably find you already have something similar. amzn.to/3wJOuzT
Hi,
I have one of the white box 8mm converters and am getting the error message 'please connect power supply' when i start to scan and it will not start scanning.
The machine is powered up and the screen is lit.
Can you help please.
Regards
Steve
I wish I could help but I have never seen this message. I wonder if there is any chance if you were to connect the cable to watch the screen on a tv if it might reset something and then maybe it would work. It is a long shot but I can not think of anything else unless there is something wrong with the power supply like it is giving 9 volts instead of 12 volts something like that. Sorry wish I could help.