วีดีโอ

Thanks so much. I had to email to get the firmware or I never would have been able to do some of the reels I have. Only place I found this info.

When formatting on a computer do you use the Quick Format or a regular format?

They will not sell you the motor

Thanks! This was just what I was looking for...

Thank you so much!

Wow!! My machine was doing the same thing. I'm so glad I found your video!! The change in the SD card fixed all the issues. Thank you so much so much for making this video.

It's due to resistance somewhere along the line, whether it be tension on the film, or tension on the mechanism inside of the box. I opened mine up and found a sticking spot when I rotated the gear attached to the stepper motor. A few turns and it loosened up, but it concerns me that this happened to begin with as I feel completely disassembling the gear box would lead to a heap of plastic in the garbage.

This worked, thanks

Hello ron my wolverine movie Maker pro constantly rotates when turned on and shows nothing on the screen what is the problem how can I fix it

Wow! This saves my job. Thank you so much.

Thank you so much, i forgot about this hack.

📽️🎬🇧🇷!

I am happy that I found your channel. I just purchased a Wolverine Pro. First roll of double eight worked perfectly. the first roll of super eight worked perfectly. As I moved on thinking everything was perfect, now it seems that every roll I have tried to put on the machine jams? I even tried lubricating the film and rewinding on a projector. I see you mention something about a paper wedge? I don't see it in the video for some reason, I would much rather try that before messing with the screws on the pressure plate.

Thank you very much for this video, which is most valuable and solved my jitter problem.👏😀

Hey Ron! do you have any way to receive messages for more specific issues with film? Would love your input/help

You are amazing, thank you so much!

Wow! Great job!

Wonderful! Great job! Thanks much!

had same problem, it was caused by the Takeup tension being too high, esp on larger reels. Simple fix, do not use the take up spool and just let it feed down into a box. Do not touch the film.. when finished, simply rewind it back on to the spool it just came off. Works every time.

I had noticed this issue too. Having better media didn’t fix it for me, but I only ever had issues with dark scenes on film. Looked like the sensor on the machine was not being scanned at the right time. I ended up just using the machine as a consistent advance timer and using egregiously expensive video gear (cinema camera and a macro lens) to record 2fps 8K timelapse video of the film running through a window taped to a tracing light like what artists use. Bunch of extra steps, but I got a consistent frame and stupidly clean 1080p renders.

It worked. Thank you, Sir. May God bless you 🙏

Fake warning has nothing to do with write protection.

Hm, and if you get the error (including the sound) if you have Super8 film in and it's set to Super 8 at the switch (I have the same model, but it's a "reflecta")?

Hello, Thanks so much for your video. Really helpful. I have a Reflecta Super 8 scanner and lately have had problems with the image. There seems to be a 'hotspot' where the light is more concentrated in the scanned image. It is a fixed point throughout multiple rolls. I imagine it is because the light is too close to the image at this point. Any idea how to fix this? Best, Jim

What programs are you using to edit the films with ? Thanks

does it work for 16mm?

The process is interesting. Always remember to use N-95 construction masks to prevent breathing the flaky powder. And not all films require to be prepared using WD-40. The curling iron will do two things. 1.) Soften the film back to flat. and 2.) Exacerbate the vinegar syndrome. Heat is an enemy of films that have VS. Question, after using the WD-40, does the film still emit a vinegar smell? Also how were you able to scan the entire frame whereas I see the additional picture area, above and below the frame lines?

Thank you sir! I didn`t know vlc can convert video files.

Thank you so much

Does it matter on the type SD/SDHC card as it pertains to ULTRA , ULTRA+ etc card as long as it is not more than 32GB

FWIW having tried the Magnasonic FS81, the Kodak Reels (version 2.0) is far superior. You can set the sharpness to near zero and get a much cleaner image for post-processing should you desire to add artificial sharpening to your digitized films using tools far superior to the crap software built into these cheap scanners. Zoom all the way out, centre your frame so you're capturing as much of the image as possible without all the digital zooming and cropping built into the scanner. Then crop, colour correct etc to your heart's content if you feel it necessary. The Wolverine/Magnasonic and all the other look alikes are IMHO worse than the Kodak which seems to be its own device.

OK I seem to have developed another problem. My Wolverine pro is only three months old now it seems like the pin the guides the film is getting stuck. The machine starts out fine then it gets to a point where the film stops in the machine and makes a grinding noise. I then get the check film path error message. The only way I can get the machine to work again is by taking a small screwdriver and pushing the pin one way or the other. Then it works for a while. But then it stops again I've gone so far is trying to run the machine without film and the same thing happens. The pin just sits there doesn't move and the machine makes a grinding noise. Any ideas

Thank you for your video. I had the same problem. I personally achieve the best results, using an "old" 8GB microSD card. One mechanical problem is the firm pull on the take-up reel. The pulling would also cause jitterring on my machine. My workaround is a clean box for the scanned film and wind it back on the reel after scanning. My scanner, original for 60m reels, allows to scan 120m reels in one piece when selecting 5" reel.

Couldn't figure out why my Reflecta refused to accept my SD cards. Regular format on my PC didn't work, so I tried to format in the Reflecta, but it got stuck on "Wait" for several hours. This video gave me the answer. Had to actively choose allocation size 32 or 64KB when formatting on my PC. Thanks a bunch! 🙏

You should stabilize the films, that way they are more professional looking.

Don't push the contrast on the professional telecine. It's gamma that you need (PC and video use different gamma, and it's often a real mess, making people believe 'contrast' would be missing when they're just not watching it on the right equipment with the right gamma). Because yo're using contrast instead, you're blowing out the highlights.

You did very well. 😊

Thanks for this great tutorial. My Wolverine take up has failed so miserably I now just spool the scanned reels into a box. I can live with that, but I have a major issue which may or may not be connected. Some Super 8 reels are massively juddering on the horizontal hold on playback, so the extent that the frames don't even all scan at the same length, let alone stabilised. Is this related or is there a fix? I wondered if it was the teeth not engaging with the sprocket holes but apparently this has happened to other people when the reels run through perfectly on a projector. Thanks if you have any advice!

Bonjour quel logiciel de montage utilisé vous ? Merci

You do not mention any possible ways to repair a jittery file that is already recorded. Do you know of any way to do this? I have spent about 45 hours digitizing family movies and do not want to repeat if possible.

Hello, I'll start like this! When I saw the clip and heard that it was due to the SD cards, what quality came out when digitizing! I was very doubtful. I bought the Lexar SD cards and tried them out. I use the Movie Maker Wolverine and am moderately satisfied. Some of them are 60 year old Super 8 and Normal 8 films. Some with a very elaborately created stereo soundtrack. The biggest worst problem is flashing - flickering. This is not in indoor shots but outdoors. With the Lexar SD and then the advice to digitize backwards, the problem has improved significantly. Reversing is also a good idea because the rear edge of the frame is relatively unused and thus ensures good feed. In general, I am grateful to many people online. There are films that were filmed on Agfa and are very catastrophic! On the internet, dealers write that it is mold, which is total nonsense. These are salt crystals because Agfa developed debtor's liability. Thanks to the channel “super8tovideo” and others online. Unfortunately it is not possible to write to the channel privately.

thanks!!

(Miloslav - 62 years old - Czech republic (Czechoslovakia ) Yes you are right. The problem can't be the card, it's more the excessive pull of the take-up reel. I had a Reflecta first, after reaching the 550 counter I bought a Wolverine. Reasons. 1. can 18 cm coils 2. the output is a video with a speed of 20 frames per second. In truth, the main reason was thing #3: the film is held in the film track by three points, not two. Although I had to order the Wolverine directly in the US, it was not imported to Europe, but I think it was worth it. One more piece of advice: I use editing software Edius 9 - above all, an excellent image stabilizer. very necessary on 8mm films. Black and white level corrections will also help a lot. Sample: th-cam.com/video/XfFgTFNv5k4/w-d-xo.html (public screening with audio recording - comments of the participants, mostly elderly people. Very handy for preserving not only visual memories... After all, those evenings have been called "Eight millimeter memories" for 5 years now.

Hi! I need some help, hope you'll know what to do... my Wolverine won't start either, I've worked with it for a whole year, 500+ files and today it just didn't start at all, I hold the power button and nothing happens, any idea about how to solve this issue?

Wow! Excellent video.

G’day Ron 😎🏄‍♂️🌈🇦🇺

Great tips! Experience counts. 😊

I've been using the Wolverine for about 3 years now and have done well over a 1500 feet of 8mm film. I'm glad I purchased the machine for online sharing of our old home movies. Having said this, I must say if it weren't for editing the basic scan in PowerDirector I would have returned the Wolverine for a refund. Without denoising in PowerDirector, etc., the scans are horrible. The Wolverine pixelates and blurs the images. But with a small onscreen viewing it's tolerable after denoising.

Thank you so much for the advice. I bought an old 8mm family film that was so brittle it would jam in the projector. Hopefully WD40 will do the trick.

Thank you!!