I can't get over how much I learn watching videos of welders who know what they are doing....like here. I still suck but I would suck a lot more if it wasn't for guys like this....
Wow! Learned more about accurate pipe welding in the first 2 minutes than i even imagined existed!! Get some work in Boca Chica welding rockets, it would be a cake walk and make bank man.
That was close i was having withdrawal symptoms lol. Fantastic video reminded me of your old school videos truly fantastic skills and work love watching them wish I had skills like yours. Thanks for sharing 👍👍
@@ARCONEWELDINGhave a wonderful time, I spent a little time there in 2002, beautiful country....my wife's family is from Ireland.....cheers from USA, Paul
I gotta get back to weld since I stopped 6 years I had to take care of my wife going through brutal chemo breast cancer now I’m back learned the hard way I shouldn’t never stop whatever you do but got no choice taking care of love one
Simply a great video and much respect! I'm not a welder,,,, please explain,, when you welded the threaded nipple the first weld you did looked great and then you went over it again, is there a special reason for this? Great job keep it up.
Thanks dude ✊🏽 and i put a root in it first a smaller weld that i can control better then i go over it with a hot solid weld melting everything together
The root gap on a mig setup is a bit large. Mig root weld is done with a slight downhill allowing a easy fill of the root gap. In fact a smaller root gap will not allow a complete tie in of weld to inside of landing of root.
Used to study piping and construction but they never showed or told us about half of the tricks I see you use that make the job easier to manage, may I ask. Is it normal for MAG welding on piping? I always thought it was the standard to TIG piping. Would love to hear.
Here in Michigan Oil fields Mig welding pipe is perfectly fine up to 800 psi and anything over that was tig root with 7018 fill and cap. Unless the customer called out something else
what kind of wire you are using for welding the pipes usually. and an other thing i want to ask is the welding machine common or you you have to use pulse machine
Nice video, you should do a mount for the welder so you don't have to hold it. I struggle to do piping i just don't have good enough tooling to do it right, i mean my vice doesn't even work lol
At about 2:30 you have 20 cm on your measure... now how do you come up with tha? How do you know what lenght the straight pipe should be? Do you have any pipe welders shortcuts in terms of mathematic?
Well the drawing shows a set of 200mm so i X 200 by 1.414 and that gave me the travel from corner to corner then i did my cut list to give me the pipe in the middle then i put the set together
Hey man, just came across your channel. Glad I did. Amazing work! I'm building a turbo manifold out of mild steel 1.5" Sch 40 weld els. Do you have any advice on technique for the best looking weld that will handle the heat cycles without cracking? Is a basic weave good enough?
Hes a rolly polly bench welder Get him on a pipe rack with a gash tig set and a mirror Ive felt sorry for many a welder And also been in awe of few too
@@dosantoss100 i worked on Lorch , Lincoln welding machines and if machine has no special settings It's very hard to avoid sparks but maybe im bad welder who knows 🤣🤣
I’m a ship fitter /welder but I’m slowly learning pipe fitting/welding. Your channel is great! Thanks for the awesome content and knowledge!
I can't get over how much I learn watching videos of welders who know what they are doing....like here. I still suck but I would suck a lot more if it wasn't for guys like this....
Молодец,что сказать,повезло парню с оборудованием,а мы все досих пор варим такие конструкции электродами,ак в каменном веке суровые)
Во-во у меня тоже на работе есть фрониус только полуавтоматической нет проволоки а так все есть почти 500 тыс руб стоит Аппарат
Outstanding workmanship! I learned a bunch of techniques. Thanks for posting - I'm subscribed now!
What a professional welder you are great job calvin,a true trades man.
Thank you man
@@ARCONEWELDING What happens when the pipes are done welding? In the sense of do they go through a special cleaning process?
Awesome job every time! Clear shots of the welding too 👍🏼
It’s interesting to see that your methods are very similar to ours here in the states. 🤙🏾
Wow! Learned more about accurate pipe welding in the first 2 minutes than i even imagined existed!! Get some work in Boca Chica welding rockets, it would be a cake walk and make bank man.
Man you are a excellent welder!! Greetings from Poland and ceep up the good work
Bro you are the best at it.👍
The shots at 11:40 are nice! Good skills and video 👍👍
Thanks man
I like that little trick where you use that spacer chained to the vice. @ 3:00
an utter pleasure to watch you work your craft!
Ooof I just got a hired for a similar job appreciate all the studying material quality work man
I really liked the video and the steps performed. I see the 45 elbow nipple so short that the welds overlap.
Great video! 👍👍
Greetings from Texas 🇨🇱
Never welded pipe with mig, only stick, TIG & oxy, you inspired me to give it a go; what do the pipes carry by the way?
If you can stick and tig weld pipe then why bother mig welding it?
Классный сварочный аппарат👍👍👍 Хороший сварщик. Отличная работа
That was close i was having withdrawal symptoms lol. Fantastic video reminded me of your old school videos truly fantastic skills and work love watching them wish I had skills like yours. Thanks for sharing 👍👍
Did you catch at 9:04 where he used a level to scrape across a soapstone mark to find and mark top dead center? Nice trick!!
Yeah dude, everything to save time
What are your settings when cutting with torch?
Всё круто.Провар трубы с одного шва делаешь или с двух?
well done as always Calvin....Cheers...I didn't catch where you were? hope you are back soon....
Im in Ireland atm will be back in a few months
@@ARCONEWELDINGhave a wonderful time, I spent a little time there in 2002, beautiful country....my wife's family is from Ireland.....cheers from USA, Paul
Your job is my dream ☺️
I gotta get back to weld since I stopped 6 years I had to take care of my wife going through brutal chemo breast cancer now I’m back learned the hard way I shouldn’t never stop whatever you do but got no choice taking care of love one
The best teacher 🤝
Simply a great video and much respect! I'm not a welder,,,, please explain,, when you welded the threaded nipple the first weld you did looked great and then you went over it again, is there a special reason for this? Great job keep it up.
Thanks dude ✊🏽 and i put a root in it first a smaller weld that i can control better then i go over it with a hot solid weld melting everything together
All of your videos are awesome, thank you! Greetings from Alaska. Wish we could get the Fronius welders up here
Isnt it hard to fill the wide gaps? The wire is much thinner than the opening?
Great welding and setup👍
The root gap on a mig setup is a bit large. Mig root weld is done with a slight downhill allowing a easy fill of the root gap. In fact a smaller root gap will not allow a complete tie in of weld to inside of landing of root.
Perfect explanation
Used to study piping and construction but they never showed or told us about half of the tricks I see you use that make the job easier to manage, may I ask. Is it normal for MAG welding on piping? I always thought it was the standard to TIG piping. Would love to hear.
Here in Michigan Oil fields Mig welding pipe is perfectly fine up to 800 psi and anything over that was tig root with 7018 fill and cap. Unless the customer called out something else
People are using mig more and more because of its speed but my pipe is all low pressure so is perfectly fine and its almost standard to mig in the uk
what kind of wire you are using for welding the pipes usually. and an other thing i want to ask is the welding machine common or you you have to use pulse machine
I only use pulse to save on clean up and im using 1.0mm solid core copper free wire
Nice video, you should do a mount for the welder so you don't have to hold it.
I struggle to do piping i just don't have good enough tooling to do it right, i mean my vice doesn't even work lol
That was cool!! I've never seen a scribe line laid out like that with a level. Can, you show technique behind that?
I use the level to scratch a line top dead center and its almost perfect
@@ARCONEWELDING That was really cool!! I'm going to have to try it out on Monday..
The Best, Teacher!
Przyjemnie się ogląda Twoja pracę, jest bardzo dokładna i precyzyjną. Good Job 👍💪
3:10 you don't need to check elbow level both side. Just one along the pipe cause you can always turn pipe.
Yeah thats true but i don't want to double handle, if i put it in the vice i don't want to move it unless i need to, just trying to save time
You are a magic super man you dont need pipe fitter🙀
Inconel 625 gap wire is highly recommended, doesn't nip when you are spotting butts together
This guy is great fun to watch
Never done pulse welding for cap runs. I’ll have to give it a go one day.
Yeah man definitely, zero clean up
Love the counterbalance rotator.... Good job
Напишите, пожалуйста, хорошо ли прогревается металл при такой сварке? Крепкий шов получается?
Congratulations show!!
I love this channel you make such a great job.
thank you.. can i learn with you directly
At about 2:30 you have 20 cm on your measure... now how do you come up with tha? How do you know what lenght the straight pipe should be? Do you have any pipe welders shortcuts in terms of mathematic?
Well the drawing shows a set of 200mm so i X 200 by 1.414 and that gave me the travel from corner to corner then i did my cut list to give me the pipe in the middle then i put the set together
congrats for timing teaching
Precision pipe fitting and welding. Thanks
Do you know where I can buy that aerosol for the nozzle?
Find them on instagram and go from there
Hey man, just came across your channel. Glad I did. Amazing work! I'm building a turbo manifold out of mild steel 1.5" Sch 40 weld els. Do you have any advice on technique for the best looking weld that will handle the heat cycles without cracking? Is a basic weave good enough?
Bevel and back purge
Please make a video on pipe rolling fabrication.
C'est un grand Tuyoteur
I admiré your work is amazing
What part of 🇮🇪 are working?
Way to make it look easy! 👍🏾
Those arc shot were lit
What a nice Men good job!👨🏭💯👌👏👏👏
Very nice work.
Bonne pénétration mais en Soudant sans mettre les cales est-ce que ça ne se déforme pas après soudure ?
distance of weld Gap?
nice one fella !! you are pipe fitter ?? or welder ??
Hes a rolly polly bench welder
Get him on a pipe rack with a gash tig set and a mirror
Ive felt sorry for many a welder
And also been in awe of few too
Wow. Awesome video. 👍
Très très bon ce soudeur 👍💪💪💪💪
Nice idea 👍
Beautiful work.
Great work all time
What helmet setup u useing
nice upload, i was getting worried
nice work and fast !
Very good job 👍👍👍
Wow man!!! Good job
Good job...thank's 😉😎
Good job dear
There is no goddamned sparks Fronius know how to make welding machine ,nice welds Kalvin 💪💪
I was wondering what machine was he using. Im sure he can weld like that with any other.
@@dosantoss100 i worked on Lorch , Lincoln welding machines and if machine has no special settings It's very hard to avoid sparks but maybe im bad welder who knows 🤣🤣
When u doing some stick weld
I dont think ever tbh
@@ARCONEWELDING ok , im still sub to your channel I really like it
Love pipe work
Amazing skill bro
hey Art I remember you mentioned this other day let do sick weld baby
good job bro
Lol that damn vice makes it so easy. Great video man👍
Good job bro.awesome.
о, ну наконец то ! а то ты мне уже и не снишься !!!
Nice one bro 😎
Respect ✊🏾💯
Bạn Hàn như này để điện bao nhiêu vậy
Good work
Hi. Do you have Linkedin account sir?
Bravo sei forte.
Mantapppp the pro😍👍
It’s really amazing.
Very good.
Mig welding is crush
when welder become a art
Awesome job....
Great....
#Welder here
i like to use a nipple when fitting up a threaded coupling just like a threadolet
Good skills
Great job...
Perfect. 👍
Хорошая работа.
Bravo Sir Bravo