Dylan taking some heavy hits here, keep it up man, grinding through. I remember i had problems with my own corolla which also included taking out the engine twice cause one cylinder lost compression then had wiring gremlins on and off for about a year straight. Corolla now is running perfect and have done 2 drift days without any big problems. You'll love it when its running haha and thanks for the content
Jack slipped off the crossmember and onto the oil pan, oof, been there! Bet you'll never do that again though! Also pro tip to stop you from melting bearings, take out the fuse or relay for your injectors and crank it without it being able to start so it can get oil pressure. Since the oil pump will be empty it can take a while to get oil pressure after a fresh rebuild. Good luck :)
noo i feel so bad for you..i know the pain but at least we don`t give up and when it finally works out it is a fantastic feeling :) looking forward to the road trip vids (always wanted to do something like that)
Legend if you ever have to start an engine again - get oil pressure first by disconnecting spark and fuel system! You just pump the engine over until light comes on! Mint car though, hope it's running sweet!
dam bro, just when you thought the humble rolla was an easy car to work on - she throws you a curve ball. been there, done that, dont give in, just be careful and always double check your jack/stands and pre-empt any possible dramas. best of luck, sending all my juju your way so that things go smoothly!! peace!
Spigot bearings are a real pain , took me a whole week to get my gearbox to meet up to the back of the motor . Glad you got it all sorted , I would have given up at the bent sump .
i mean if u put assembly lube on the bearings then the first crank should have gone ok, wishing the best. this whole thing teaching lots of perseverance!
I feel your pain dyl, cringed as soon as the jack slipped, although I pumped to wear my hoodie as soon as it arrives Side note: any plans to show sebs 86 transformation in the future?
Thanks for the purchase legend 💕 Absolutely! He's just tinkering atm so nothing exciting enough for a video, but any major updates will receive some content
I always get excited for latest vids of this channel,love the content. Cant wait to see the rolla drive again💪Was the sub assembly balanced? Asking because I'm also thinking of freshening up my block. Shaba🤙
Cape York* 😂 Dude the last 700km to the tip are corrugated dirt roads, and you'll need some clearance or a high tide to get on the Jardine River Ferry. But totally doable in a Rolla I want to do it in mine. Need to go April-September in the dry season up here but. Might be keen to join ya 🤙
@@BADDTIMES definitely not possible until April earliest. In the wet season the highway floods for months straight and towns get their food by barge. Not to mention the 40 degree nights haha. It's pretty wild north of Cairns definitely need good weather, clearance and spare parts
Greetings champ i from Guyana South America and would love a guide and links to parts to up grade my 1993 corolla. a present its stock with a 7afe and 5 forward manual transmission i really needs some guide
GO TIME! I need complete suspension disc brakes system back and front(parts for everything) and I desire a20v blacktop with turbocharged and with exhaust system full works. It’s not for racing but I do need a nuff nuff power
thanks for joining us! Andrew still runs the old channel in case you want to re-hit that mf subscribe button, they're just two separate channels now :)
ahhhhhhhhhh watching the engine build gave me the hebegebies. i hope you checked the bearing clearances off camera (i know you dont have a bore gauge) with plasti-gauge or something because having oiling / oil pressure problems isn't good. i know this sounds like a pain in the anus but you should probably go ahead and check those clearances If one or more bearing clearance is wrong that means catastrophic bearing failure i.e. new crank and connecting rod(s) and if its super bad even a new engine.
The block was taken to a machine shop and everything installed was recommended by them. Not to mention that one of our best friends is a professional race engine builder who helps with everything we do. A 13 minute video can't possibly show you all of these details, so please don't worry so much lmao
Dylan taking some heavy hits here, keep it up man, grinding through. I remember i had problems with my own corolla which also included taking out the engine twice cause one cylinder lost compression then had wiring gremlins on and off for about a year straight. Corolla now is running perfect and have done 2 drift days without any big problems. You'll love it when its running haha and thanks for the content
Haha it'll definitely be worth it!! Some day soon hopefully
Honestly one of the best, most underrated, underground channels on youtube. Love the content guys, cheers from California!
Thank you 😍😍😍
@@GOTIME-CO Gonna be buying some merch soon to support the 1.6l skids!
8:20 Vegemite on toast got me homesick
Ouch. Bugger abt the sump :/
Hahaha I'm sure you can pile heaps of salt onto some toast over there in Japan and get a similar result 😅
@@wasabicars yeh 😓 but it's okay now!
Engine building is so stressful yet satisfying. Lots of things that can go wrong if not done right but when done right, it’s very rewarding
The hoodie in the outro was unfortunately fitting, that being said, congratulations on getting the motor in 💕
Jack slipped off the crossmember and onto the oil pan, oof, been there! Bet you'll never do that again though! Also pro tip to stop you from melting bearings, take out the fuse or relay for your injectors and crank it without it being able to start so it can get oil pressure. Since the oil pump will be empty it can take a while to get oil pressure after a fresh rebuild. Good luck :)
Don’t give up Dyl you have one of if not *the* coolest car I’ve come across
noo i feel so bad for you..i know the pain but at least we don`t give up and when it finally works out it is a fantastic feeling :) looking forward to the road trip vids (always wanted to do something like that)
Yessss it will all be worth it!! 💕
Dude I did the exact same thing when I jacked my rolla up, straight in the pan 😞
Legend if you ever have to start an engine again - get oil pressure first by disconnecting spark and fuel system! You just pump the engine over until light comes on! Mint car though, hope it's running sweet!
dam bro, just when you thought the humble rolla was an easy car to work on - she throws you a curve ball. been there, done that, dont give in, just be careful and always double check your jack/stands and pre-empt any possible dramas. best of luck, sending all my juju your way so that things go smoothly!! peace!
Hahaha thanks ❤️❤️❤️
Spigot bearings are a real pain , took me a whole week to get my gearbox to meet up to the back of the motor . Glad you got it all sorted , I would have given up at the bent sump .
11:03 "Thanks heaps for *BEARING* with me through this one."
ohohohohoh
Hard luck with the sump/pickup!! Very relatable
i mean if u put assembly lube on the bearings then the first crank should have gone ok, wishing the best. this whole thing teaching lots of perseverance!
came to chat to say about the lube before tightening. . . . woaaaa nice its already been talked more than once
Bruuuuuuuuh, thank God you checked the pickup. You boys have some bad luck.
this is why i have mad anxiety about jacking a car up. thanks for reinforcing that fact :)
Hahahaha anytime :)))))
Happens to the best of us man! No need to give up on cars lmfao we've all been there
It's tempting sometimes hahaha
I feel your pain dyl, cringed as soon as the jack slipped, although I pumped to wear my hoodie as soon as it arrives
Side note: any plans to show sebs 86 transformation in the future?
Thanks for the purchase legend 💕
Absolutely! He's just tinkering atm so nothing exciting enough for a video, but any major updates will receive some content
I always get excited for latest vids of this channel,love the content. Cant wait to see the rolla drive again💪Was the sub assembly balanced? Asking because I'm also thinking of freshening up my block.
Shaba🤙
Thanks 💕 the assembly wasn't balanced because it's only standard, so factory balancing is fine :)
hit me up when you're on that roadtrip! would be sick to go for a cruise or maybe even an event if it lines up
Cape York* 😂
Dude the last 700km to the tip are corrugated dirt roads, and you'll need some clearance or a high tide to get on the Jardine River Ferry. But totally doable in a Rolla I want to do it in mine. Need to go April-September in the dry season up here but. Might be keen to join ya 🤙
was actually gonna hit you up to ask about it hahah
might have to hike it, would that be possible around jan-march?
@@BADDTIMES definitely not possible until April earliest. In the wet season the highway floods for months straight and towns get their food by barge. Not to mention the 40 degree nights haha. It's pretty wild north of Cairns definitely need good weather, clearance and spare parts
@@ZacDeclerck haha shit that's hectic
maybe ill just have to get to cairns
Video in a nutshell: -> "FUCK!"
Ever felt like flipping over a car before?
Video is so satisfying to watch but as a non car enthusiast I have no idea what the fuck is going on lol
But lock in the post lockdown surf trip
Greetings champ i from Guyana South America and would love a guide and links to parts to up grade my 1993 corolla. a present its stock with a 7afe and 5 forward manual transmission i really needs some guide
Hi! It depends which parts you need 🥰 there are many places to buy many different things
GO TIME! I need complete suspension disc brakes system back and front(parts for everything) and I desire a20v blacktop with turbocharged and with exhaust system full works. It’s not for racing but I do need a nuff nuff power
So unlucky 💔
Cape York will be hard to get there in a non 4x4
ooo i did not know this, might have to hike to the end
can i ask, why the earplugs?
ruined my hearing not wearing them in the past, now i have hectic tinnitus
fare enough man.
noooooooo....
good video at least
:-(
Was wondering why I haven't seen a new fellas network video in ages 😂 unsubbed from the og renamed channel and came her instead
thanks for joining us! Andrew still runs the old channel in case you want to re-hit that mf subscribe button, they're just two separate channels now :)
ahhhhhhhhhh
watching the engine build gave me the hebegebies. i hope you checked the bearing clearances off camera (i know you dont have a bore gauge) with plasti-gauge or something because having oiling / oil pressure problems isn't good.
i know this sounds like a pain in the anus but you should probably go ahead and check those clearances
If one or more bearing clearance is wrong that means catastrophic bearing failure i.e. new crank and connecting rod(s) and if its super bad even a new engine.
and oiling problems other than the bent pickup i mean.
The block was taken to a machine shop and everything installed was recommended by them. Not to mention that one of our best friends is a professional race engine builder who helps with everything we do. A 13 minute video can't possibly show you all of these details, so please don't worry so much lmao
@@GOTIME-CO yea ok