Finally a quickly, precise and direct to the point tutorial. Thank you very much! A quick question: Is it possible, following this guide, to also obtain data from end-users? I mean: How much time and which sites they are navigating too?
Muito bom Parabens, tive um pequeno problema de configuração no Firewall do Microtik, ele importou muitas informações porem está com N/A em outros status, verificando o problema.
thank you for your video, it's superb and practical...🤗🤗 I used it for a fortigate firewall. I have a problem; I can only collect the metrics linked to the interfaces. the prometheus expressions for fortigate that i found are not recognized, is there a way to increase the expressions? if so, how please?
Thanks, managed to follow along but am missing some data. I can only see cpu temp, firmware info and some interface rx/tx counts. I'll poke around and see if I can't work it out.
@@ripon4you I tried 9.3.1 with my mikrotik (hAP ax3), I see the same data that i see with the latest 10.x version of grafana. perhaps the snmp data doesnt match up with your mikrotik?
রিপন মল্লিক ভাই, আপনার ব্লগ-এর ভিডিও গুলো খুবই উপকারী। আপনার এই ভিডিও টা আমি ২/৩ বার ভাল করে দেখলাম, তারপর আপনার গিটহাব--এর টেক্সট ফাইলটা দেখে Monitor Mikrotik Router with Prometheus and Grafana on Ubuntu Server কাজ শুরু করেছি, কিন্তু prometheus.yml ফাইলটা কনফিগার করে যখন সার্ভিস টা রিস্টাট দেওয়া হল এরপর আমার সার্ভার আর কাজ করছে না। আমি উবুন্টু অপারেটিং সিস্টেম 22.04 সার্ভার ব্যবহার করে কাজটি করছিলাম। কোন সঠিক সমাধান থাকলে একটু জানাবেন।
Good evening. Is it possible that some one can help me on this Prometheus DB problem. After i added the Server and Router IP. My Prometheus failed to start with error prometheus.service - Prometheus Loaded: loaded (/etc/systemd/system/prometheus.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sun 2024-04-28 20:15:26 SAST; 12min ago Main PID: 3345 (code=exited, status=2) CPU: 40ms Apr 28 20:15:26 grafana systemd[1]: prometheus.service: Scheduled restart job, restart counter is at> Apr 28 20:15:26 grafana systemd[1]: Stopped Prometheus. Apr 28 20:15:26 grafana systemd[1]: prometheus.service: Start request repeated too quickly. Apr 28 20:15:26 grafana systemd[1]: prometheus.service: Failed with result 'exit-code'. Apr 28 20:15:26 grafana systemd[1]: Failed to start Prometheus. Anyone that can help met on getting it running again?
the best TH-cam channel ever I found 🤟🤟
Take love brother 💌💌
Brother! Thank you so much for your time and comment.
thanks you very detail video for beginner
I need help, its works but not all the graphs are working (for example network traffic). What i am doing wrong?
help me, failed pharsing data from prometheus, i used snmp exporter..
Very nice tutorial.
Thank you
Thanks for this video. Solve my SNMP on Linux integration problem.
Thank you so much for your comment.
Finally a quickly, precise and direct to the point tutorial.
Thank you very much!
A quick question: Is it possible, following this guide, to also obtain data from end-users? I mean: How much time and which sites they are navigating too?
Amen Brother
for that you need to setup the log server to see the end users traffic.
Hello nice tuto. How to change the snmp config in the prometheus config file for scrapping
Thanks for the Video, it's really helpful. However when adding the mikrotik into the prometheus its services is not coming up
Muito bom Parabens, tive um pequeno problema de configuração no Firewall do Microtik, ele importou muitas informações porem está com N/A em outros status, verificando o problema.
thank you for your video, it's superb and practical...🤗🤗
I used it for a fortigate firewall.
I have a problem; I can only collect the metrics linked to the interfaces.
the prometheus expressions for fortigate that i found are not recognized, is there a way to increase the expressions? if so, how please?
Can you give me a guide to config prometheus.yml on fortigate
Thanks, managed to follow along but am missing some data. I can only see cpu temp, firmware info and some interface rx/tx counts. I'll poke around and see if I can't work it out.
Install the grafana version 9.3.1. Hope your problem will be solved.
@@ripon4you ah ofc i didn't check what version you were running :) I will try downgrading. I have 10.4.2 deployed at present.
@@ripon4you I tried 9.3.1 with my mikrotik (hAP ax3), I see the same data that i see with the latest 10.x version of grafana. perhaps the snmp data doesnt match up with your mikrotik?
Very nice tutorial. I have problem in VPN's, dont see rate. Any idea?
Thanks for your comment.
LINK DEAD.please update the link
Wow
Thank you
Everything working right. however, there is no data in grafana
and prometheus is collecting data. when i checked the web all prom... services up and collecting date. also when i verify in grafana i have access
রিপন মল্লিক ভাই, আপনার ব্লগ-এর ভিডিও গুলো খুবই উপকারী। আপনার এই ভিডিও টা আমি ২/৩ বার ভাল করে দেখলাম, তারপর আপনার গিটহাব--এর টেক্সট ফাইলটা দেখে Monitor Mikrotik Router with Prometheus and Grafana on Ubuntu Server কাজ শুরু করেছি, কিন্তু prometheus.yml ফাইলটা কনফিগার করে যখন সার্ভিস টা রিস্টাট দেওয়া হল এরপর আমার সার্ভার আর কাজ করছে না। আমি উবুন্টু অপারেটিং সিস্টেম 22.04 সার্ভার ব্যবহার করে কাজটি করছিলাম। কোন সঠিক সমাধান থাকলে একটু জানাবেন।
আপনারটা তো পরে ঠিক হয়ছিলো। অনেক অনেক ধন্যবাদ আপনার মতামতের জন্য।
bhai github to file nai
You can help ? I can't get out of the down state in prometheus
Make sure you have align both job name.
@@ripon4you I copied everything as in the guide
@@Mikam-Monitoring
Knock me in WhatsApp
8801918932195
@@ripon4you hello..can you help me, the prometheus and snmp exporter services have been successful but the traffic does not go to grafana parsing..
Can you help , after i add the Mikrotik to prometheus.yml it fails to restart
prometheus.service: Failed with result 'exit-code'.
me too bro if you find solution please tell me too how can solve this
Everything in the description. All the commands are written there. Everything shows to you steps by steps. Please try again with very very carefully.
maybe your script - job_name: 'Mikrotik' too far left
@@BapakRumahTangga1 Cara, vc me salvou! Era isso mesmo
Good evening. Is it possible that some one can help me on this Prometheus DB problem. After i added the Server and Router IP. My Prometheus failed to start with error
prometheus.service - Prometheus
Loaded: loaded (/etc/systemd/system/prometheus.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sun 2024-04-28 20:15:26 SAST; 12min ago
Main PID: 3345 (code=exited, status=2)
CPU: 40ms
Apr 28 20:15:26 grafana systemd[1]: prometheus.service: Scheduled restart job, restart counter is at>
Apr 28 20:15:26 grafana systemd[1]: Stopped Prometheus.
Apr 28 20:15:26 grafana systemd[1]: prometheus.service: Start request repeated too quickly.
Apr 28 20:15:26 grafana systemd[1]: prometheus.service: Failed with result 'exit-code'.
Apr 28 20:15:26 grafana systemd[1]: Failed to start Prometheus.
Anyone that can help met on getting it running again?
the alignment is so important in the prometheus configuration file. i have already highlight in video when i was configuring the prometheus.
Yes i have noteced the space issues. I eraced evry thing and i reinstalled ubuntu from scratch. My grafana i working now for 2 weeks with no problems.
[Unit]
Description=Prometheus
Wants=network-online.target
After=network-online-target
[Service]
ExecStart=/etc/prometheus/prometheus --config.file=/etc/prometheus/prometheus.yml
Restart=always
[Install]
WantedBy=multi-user.target
Very nice tutorial.
Thanks a lot.