Lighting Circuits Switch wiring Wiring at the switch
ฝัง
- เผยแพร่เมื่อ 18 ม.ค. 2018
- Hi .In this video explains the 3 systems of lighting circuits used in the UK . I concentrated on particular one where all cables are connected at the switch . It's much more convenient if you prefer to install spotlights instead of ceiling rose with bulb. Hope it helps with your home projects. Thanks for watching.
- แนวปฏิบัติและการใช้ชีวิต
After watching so many videos, this is so clearly explained! Thanks a lot for sharing 👍
I think it's important to wire an electrical circuit in a manner that is easy to maintain and access so when designing and installing this should be taken into account. There is no need to install junction boxes when not necessary so in domestic I would prefer to see the first method (loop in and out). Good clear explanation in this video.
I am no electrician. But your explanation and video made something i thought was rocket science look simple and clear.
Thank you very clear and useful explanation. I’m running cables for an electrician and wasn’t familiar with this method. Think I can put my ceiling up now!
the only practical and helpful video I’ve seen so far! Thank you!
Not many electrition explain them selfs properly but you do thanx. I'm running cable for spots, under cupboard lights and two ceiling rose lights all in the kitchen I like your way of connecting the power straight to the spots but because I'm doing cupboard lights and ceiling rose I got confused so I'm using junction boxes for spots and cupboard lights onto ring . Good video .
Really enjoy your videos. You clearly and simply explain the task
Thanks for the perfectly simple explanation. Appreciate it.
just watch this video and really like it as you were very clear with your explanations.
A very well explained and helpful video, top work.
Thank you. Your videos are well presented and very clear. Your diagrams are excellent too! I've learned a lot.
Thanks Martin
thank you now this is what i was looking for this has been very helpful
Thanks for this video, REALLY helpful
Spot on 👌🏼 easy to understand and well explained 👏
Excellent, thank you. Very helpful👍
Thank you! Your a great teacher. This helped me a lot.
*You’re
Thanks, you explain it brilliantly.
Just loop the line conductors through the top of the switch instead of extra connections in the wago
That’s what I was thinking 🤔
Fantastic thank you for your clear explanation.
Great video , I need a light under stairs I can now come off switch in kitchen thank you .
Good job mate, great video.
wow i found this very helpful Thank you keep up
Thank you, very informative
Brilliant. Very grateful
Thank you sir excellent explanation.
Excellent explanation 👌 👏 👍 😀
Good man .useful video .clear .thank you.
Thanks for explanation 👍
Could you do a video on wiring an LED strip to a lighting circuit and switch please?
Hi. I am using the switch connecting system, as I want to install a number of downlights. This is straightforward with the exception that I want to incorporate two way switching using 3 core and earth. Where previously I would intend wiring the brown wire from the power in cable to the Common, in the video the black wire from the 3C&E is wired to Common. Can you please describe the correct wiring in this situation. Thanks
Thank you very useful.
super clear
Thank you very much .......
very very nice Thanks sir
Very interesting thanks
A good viedeo
Note that the three vertical cables to each switch must be chased into the wall. Thus rewiring with this switch loop method requires more work as most traditional UK properties have conduit in the wall that permits only one or max two cables.
If I want to use two way or even 3 way switches, how is that achieved using the last, switch connection method?
Wago connectors seem alot better than conventional blocks. In some way this 3rd method of light switch wiring is easier than loop in and junction box
good
👍👍👍👍
What about if you need to install an extractor fan or smoke alarms of the lighting circuit? There won’t be permanent live at the pendants
This is awesome!! Just want I needed to start working on my house. Thank you so much.
How do u wire it at the light bulbs
@@grantmp5365 Your light fixture should have 3 wires. Black, white, and bare copper.
Attach black to black (Hot / live wire), Attach white to white (Neutral wire), and attach the copper wire (ground wire) from the wall to the green grounding screw in the box, then attach the bare copper wire from the light fixture to the copper wire in the box.
Fitting deeper back box got another reason. Its dimmer switching.
In case you want to use one of the switches of switch connection method with a dual control switch ( hall light on staircase?)..what are you doing?
👍
Hi, old vid but just come across it, hopefully you can advise? In my garage I have a consumer unit and out of the bottom of the consumer unit there is a cable direct to the light switch. Then out of the top of the consumer unit there is a cable direct to light... I want to extend for a new light and switch but not sure what I do with this arrangement I have?
Am I the only person that is questioning this. Is the switch connection essentially wired in series because if the first switch is not working than the others upstream from it doesn't work too because only the first one is connected to the feed.
So to fit a shaver socket in a bathroom, I no longer have to go crawling around in the loft?
Hi, Thanks for your great tutorial.
Could you please tell me how you would wire a 2 gang 2 way switch using this method?
would you need to add a fourth cable ( 3 core) if so would they all fit into a 2 gang switch?
Many thanks
I’m in the same boat. Did you find out how to do this? Cheers
@@jaesedin did u find out
Q: How many power feeds can be taken from a switch? Thanks in advance.
Do you have a video showing junction box connections please?
Bravooooooo
How do u wire it up at the light pendants
Hi mate, can I use this for dimmer switch and how?
I’m wiring from the switch for down lighters but need to turn up stairs light from down and up and down stairs how can I do this?
hi why u not draw the neutral line from consumer unit a.k.a DB board
What did you do with the earth
And all this goes from only one circuit breaker? Cuz looks like it is...
In that case its not the best connection since if the cb jumps the whole house will be without lights...
Where do I get the neutral wire from if my wall switch was a smart switch which required both Live and Neutral wires?
Great video, very well explained, but could you tell me why there is no neutral wire connected to the switch, only seen you connect live wire into switch and one out.
HI Asif. the light to work needs neutral and live but switch disconnect only live conductor .There is no terminal for neutral at the switch
Hi there Sir
I have a question and am asking this questions to other viewers too who already watched the video. In the video shows the real wiring with a sticker shows that previous room, light & next room. My question is that does the previous room means the connection came from consumer unit???? Please answer this question. If anyone answer this question I will really appreciate it Thanks
It can be either previous room or consumer unit, eg if the example in the video was the first switch, the label would have said "consumer unit" but in this case its coming from the previous room/switch.
yes it is the consumer unit but could also be from the previous room
Surely put the 2 lines into common and not in a waygo ?
Just seen this video. I want to install a brand new simple downlight in the attic. I already have downlights all upstairs. How do I go about this with wago connectors?
Now how to add one switch to light all four buld ..?
The switch live will go to bulb along with neutal from wago at switch, you will then double out of terminals at bulb 1 to 2 and so on
Not sure why didn’t you just connect both permanant lives into common?
No need for junction boxes. Just go straight with the feed to the first switch and then loop it to another and so on.
A
MK rubbish. Why not connect your 2 live wires direct to the switch ? Its a lot of room. No need for wagos and extra piece of cable.
Do you have to turn the power off when working with electricity.? Or can you wear special rubber shoes.?
Again - just part of the information required to do the job correctly. What next DIY brain surgery?? SO much info missing, stop encouraging people to do what might kill them - most house fires are from dodgy diy electrics.
This work must only be done by a Part P registered, qualified electrician. It's the law!!!