Forging JAGDKOMMANDO KNIFE Out of Rusty Coil Spring
ฝัง
- เผยแพร่เมื่อ 15 เม.ย. 2021
- Hello Peeps today I'm Forging JAGDKOMMANDO Tri Edge Knife Out of Rusty Spring, it was a bit tough to forge a twisting knife and i didn't tried forging a twisting or Jagdkommando knife before but it was pretty awesome so watch out the whole video you'll enjoy it. If you like the video must share with your friends who might be interested. Also share your opinions in comment section.
SUBSCRIBE @OLDSMITH to show your Love
THANK YOU
BEST WISHES
OLD SMITH - แนวปฏิบัติและการใช้ชีวิต
![แข่งแลกของ 1 วัน!! ของใครแพงสุดชนะ!! [Ver.2024]](http://i.ytimg.com/vi/joRT59ilPHg/mqdefault.jpg)
Hello, I'm Korean. It's my first time to be in this article. I was looking for metal crafts that I really like, and I ended up looking at them. It's so much fun. We'll continue to have a lot of knives!I miss you. Thank you.
نف
مسلسل الفايكنج الموسم مرحبا 👋 مرحبا 👋
SQUID GAMES❓❗❓❗❓❓❓❗❗❓❓❗
SQUID GAME?????
I am English and I don’t know if that even really mattered anyway.
Anyway getting to the point. These knifes are made absolutely terrible they do not keep them moist continuously I even saw smoke from it at whilst lathe machine milling. Also they do not fold the steel, they just use old used springs and bend/stretch them into shape. Then mill them.
Wow that is terrible 🤣🤣🤣🤣
Вау учитывая что он всё сделал почти своими руками и не разу не ранил себя очень по мастерски сделанная работа
Урааааааа рус комент
Из стандоффа ❤️
@@Busti9249 стандоф говно
@@scratch_bebra чел
@@user-er7ju5kf2p что
Мастер своего дела. Огромный респект. 👍
Прям из стендофф 2
@@kirillrudiii углекислого газа?
@@Kabachok... стендофф это не SO2
@@kirillrudiii это не из стендоффа
@@RinGo_88 co2 💀
Да это действительно шикарная работа. Респект
Такой же хочу❤️🥰
Боже мой
Это божественно....
To viewers from the future, this is what people in quarantine are watching.
th-cam.com/video/j2GMKQfacPY/w-d-xo.html
Exactly.
For me personally these are the relaxing videos to sleep 😌✋
Wow twitter guy...haha
Yo it's that guy from twitter
Yep. I agree. Though I watched these kinda vids long before covid
From rusty scrap you ve build the Mother Of All Knifes. Amazing skill
Я человек среднего достатка .Белая зависть .Спасибо мастерам.( есть желание но нет возможностей)
Your videos are relaxing and inspiring, such a piece of work, the evolution of the hand work, thanks a lot .
I start with my stuff after his Videos👍
У стилета лучшая проникающая способность.
Превосходная работа мастера!👍
Идеально получилось 👍👍👍
я тоже русский
согласен
Absolutely beautiful. Well done.
Шикарный нож 🗡️- произведение искусства 👍
Fun fact: a blood groove is actually called a fuller, it has been said to be to push metal outwards during the forging process, said fuller was not intentionally designed for draining blood but is definitely a unintended but prefectly fine use
I thought it was to lighten the blade
@@primadeluxe4910 Lighten the blade and help it's flexibility as I heard. Helping air and blood get out of the body is a myth and not what the fuller is designed for.
a fuller was to use *less steel* in a knife's construction. it has the benefit of serving to strengthen a knife, as well as preventing gas locking when stabbing, but the primary reason for its existence was to waste less expensive and hard-to-produce steel
Completely false . From start to finish everything you said is 100% false.
A fuller is made to lighten a blade by removing material in a way that has the less impact on structural integrity.
Many blades are also shaped in a triangle, they are stiffer and were commonly used against armoured opponents
Extremely high level of craftsmanship.
Essa sem dúvida é uma das adagas mais lindas que eu já vi. Nem no Programa Américano Desafio Sob Fogo fizeram uma assim tão linda. Parabéns 🎉🎉🎉
Wow it really is a masterpiece. I wish I had the tools to work like that. Wow. Congratulations .
0
Beautiful.Amazing work.
Cheers!
Yes
I love the belt grinder... in your kitchen!
i wish i had skills like these, forging a custom blade must be one of the most rewarding experiences ever.
That beautiful!!! It looks like something the prince of Persia would carry. Great job 👏
when he shaped it into a triangle, i was saying to myself, this is wrong it should be spiral-ish. When he reheated, i realized what he's going to do.
this great. mad props to you sir!
Outstanding work of art.
Wow 2 vk ck Lộc&Thuỷ mặc áo cặp đẹp,dể thương nha.
Some men are true artisan's you are gifted.
th-cam.com/video/j2GMKQfacPY/w-d-xo.html
This is not just Forging a Knife its an ART!
Well-done keep up the the great work.
Yes of course
Этот вид ножа придумали несколько лет назад
It's not really forging at all though. What he did was some amazingly beautiful stock removal. Forging requires heat and pressure which he only used to straighten his material.
да очень хорошо сделал👌👌🤜👋
Awesome work! Great!👍😁⚒️🛠️
Who'd have thought a piece of a big spring could be made into such an amazing knife
Yep. Watch Forged in Fire, the completely forge great weapons out of basically nothing. Quite amazing
Am i the only one who thinks the metal sanding parts are very relaxing sounds?
th-cam.com/video/j2GMKQfacPY/w-d-xo.html
You need to see a doctor. As soon as possible!
@@carlosdelascuevas6140 I did but I later found out that she was a married woman 😄
@@kevinnelson7070 🤣🤣🤣
Absolutely beautiful. So shiny too😯😯
Woa ! Incredible piece ! 👍🏻
This is my favourite creation I've ever seen..😍😍😍😍..... Great job sir..❤️❤️👍👍
At first when I saw the thumbnail on my feed I was like "How the heck is he going to make that knife out of a car spring?" Holy cow was I impressed! That has to be the coolest knife ever. And I feel sorry for anyone that gets stabbed yikes!
If someone gets stabbed it’s almost if not 100% chance of death because the wound cannot be closed
So these style of knives are banned by the Geneva convention
A wonderful job. Congratulations
One day i'll be forging like you. I'll forge game and anime weapons; all that came up in my mind i'll forge someday
Good work. I was surprised you had no Anvil table. I built mine from 6x6xs and strong tie nuts and bolts and it’s not moving once I get moved and mount it down in my new workshop. You also need a good strong Heavy table with a vise. You did an excellent job on this piece without it all, and I need to get a lathe myself.
nice work , awesome piece
Very nice time paas work👏👏👏👏👏👏
This is so well made, it should be illegal. Impressive.
An absolutely beautiful and stunning piece of work!
Amazing, from junk metal, to Masterpiece! Awesome skills and Know-How!
Congratulations from Brazil ! It's a art of Masterpiece !
Agora ele poderá furar buchos com estilo! 😎
Brincadeiras a parte mas, o trabalho dele realmente ficou excelente.
Oh god… this really cool, beautiful
Хороший у ножа функционал!) Колбасу например будет легче пальцем порезать! Так для коллекции, красивый нож.
а этот нож и не создан, чтобы колбасу резать))
@@CobaltNX01 Вот и я о том же! В коллекцию красоту! Ходить с ним тоже нельзя, холодный!
Вот нахуя же он такой нужен , чтоб просто был ?
This is a beautiful piece, you did a great job
That one is way nicer than the one I bought on eBay!!! BADASS!!!
Satisfying video 📸📸👍👍
Amazing job i did never seen this type of Knife in my life 😱
The twisted blade allows maximum damage and massive amounts of blood loss. A combat knife when you want your target to die, and die slowly.
Jagdkomando is one of kind most deadly Dagger or tactical knife in the worlds, maximum damage+penetration,fast loss blood target,
Very Dangerous 👍👍👍
Awesome
And very illegal, unsurprisingly
That is a brutal weapon. The multiple finishes you achieved is amazing. The amount of editing and filming must have been a patience testing process. Kick ass job!!
Looks good but not a practical weapon actually that's why no military ever use anything like this
@@boomerhgt Actually a lot of militaries around the world ceased use after they were banned in the Geneva convention. The reason for their banning was actually the incredible effectiveness of the weapon. It left massive internal damage that, due to its unique shape, was unable to be treated through traditional methods such as suture.
@@papyrus2998 That is a modern myth, old bayonets were tiangular because of the stiffness, it makes it better for thrusting. The triangular wound is not harder to treat than a regular knife wound. There are accounts from doctors about this from the civil war era in the USA. There exist a couple of videos here on youtube debunking this myth.
@@papyrus2998
It was The Hague conventions of 1899 and 1907 that defined the rules of modern war. The Geneva convention specifically addressed combatants and the treatment of prisoners of war and civilians.
@@marcuss95
Incorrect for the wrong reasons. The Hague convention, not the later Geneva convention, set the rules for modern war in 1899 and again in 1907. Specifically banned were “dum-dum” bullets, as expanding bullets were called at that time, explosive bullets under 13mm and other weapons “intended to inflict overly painful and grievous wounds”. No specific mention was made of bayonets, but the intent was to ban the cruciform and triangular bayonet common in the 19th century in favor of a single edged bayonet, without being specific. Wounds from such weapons were very hard to treat in that time and caused slow and painful death by infection.
Virtually all nations complied except for France who retained the cruciform bayonet on older rifles. By 1914 war was on. Germany had a “pioneer bayonet” issued to about 20-30% of its troops that had a blade on one side and a saw on the back. Intended to cut limbs, but see by those who might be stuck with it as cruel and unusual. The Germans saw the French cruciform and the American trench shotgun firing nine pellets of buckshot in a similar light.
Protests were formally filed with the international court. Since The Hague had been overrun by Germany the international court was moved to Geneva. Progress was slow, as such things are. Germany announced that any American soldier captured with a shotgun would be shot. The British and American troops tended to use the saw backed german bayonet on its owner when captured. All this in a war where poision gas and everything else was on the table. Nevertheless military order must prevail. America, England and Germany were in direct negotiations to restrict the shotgun, the sawbacked bayonet and a few other odd weapons. Final agreement was near when the war ended for all effect in November 1918. While never formalized the agreement was put into effect as far as the bayonet was concerned. The shotgun was just too good to put up. The Germans ditched the saw back bayonet, the Americans the bolo and trowel bayonets, the English modified the cruciform bayonet on the proto type No4 Lee-Enfield to a spike. The French, not a party to the agreement gave up the old cruciform bayonet as well, just to get along.
So. Your right. It’s not in the Geneva convention or any international law. It’s simply an artefact of a “gentleman’s” agreement forged in a time of war but never ratified as a formal rule. Such were the good old days.
That is amazingly made
BEAUTIFUL !!
Awesome job.... amazing result
Thank you! Cheers!
Gold master
I wish I could afford one of those lathes. I love how the Blacksmith does so much by hand.
the only forging process he did was to straighten out the spring and twist the blade. the rest of this video is machine work. he didnt even forge in the taper at the tip of the blade.
the blacksmith does so much more than relying on machines to do the work for them. A BLADESMITH is more akin to what you're talking about
Very nice, great workmanship!
Old smith: the man who can make rubbish into treasures
You're good at what you do, you use your imagination very well. Keep going so those of us who like blacksmithing marvel at your creations
А почему бы и нет нет нет нет нет нет нет нет нет нет нет нет нет нет
WoW that's exquisite craftsmanship nice looking knife i would not want to be on the receiving end of a wound from that
Wow. Magic.
Would not want to get poked with that. Very nice job, always wondered how those were made.
Your machining/milling skills are amazing
Lol what
i watched so much restoration video that i know how to forge myself lol
Thats beautiful.
for some reason i kinda like how it looked when the mid grooves were black 🙄😍
Great work sir @OLD SMITH! Salute!
I am fascinated by these levels of incredible workmanship.
Absolutely awesome...👌👌
Great job you make a amazing knife
Impresionante trabajo, mis más sinceras felicitaciones !! 👍👏👏👏
Good job, buddy! The only thing I would change is the way the dagger goes in its sheath, I'd cut a thread on it, so it stays there nice and secure!
Cheers!
So like, you have unscrew the knife everytime you want to use it? And screw it back in when you're done with it? Forgive the assumption as to what your meaning is, but that is an incredible design flaw, not to mention the fact that it's a combat knife (one that's so deadly and cruel in fact, that all militaries under the Geneva convention can't even use it). Which I add, are specifically designed for emergency CQE's and consequently accessibility and efficiency.
Great videos and awesome blade. Ty my friend
Wow! Exquisite work... 💯💯💯
Really Amazing Bro.Enjoy alot.
とても、綺麗ですね！
芸術ですね！
同意。
Beautifully machined knife.
Beautiful!
This is such a creative idea! Keep up the awesome work!
Out of all the knives I own or watch get built never knew this was how. Great work!
th-cam.com/video/j2GMKQfacPY/w-d-xo.html
Это джы каманда
Give that man a BELLS! True master!!!
This is almost a lightsaber assembly. I love it.
*The video is great with the things I imagine and now is real.*
Nice skill
Good looking tool 👌
Thanks
Preaty nice for EDC . Light , easy to use , sharp and does not give a print , or create hot spots on extend use.
Kindly do these kinda unique things.! 🔥
Trabalho perfeito, muito talento. Gostaria de ver uma feita em aço damasco.
CADA VEZ MAIS UMA COISA MELHOR
AMAZING job!!! Wow
Muy lindo trabajo!!
Dam that anvil has seen some life! Nice knife too
Amazing work, that must have taken some amazing knowledge of what tool can do what job and a lot of expertise to figure out just HOW to make such a complex shape using common machine tools! Also, don't literally sell yourself short, that is longer than a mere knife, you have made the world's first Jagdcommando shortsword!
نخههخ
In this job,,there only teach you how to operate the machine,,the rest is up to you.
Beautiful knife...nice!!
Gorgeous!
Great work. It's amazing that you crafted such a clean piece from what could've been seen as scrap metal. You ever do custom work, feel free to let me know.
0йч чфц
@@user-xc4rc8vi1x ?, been I'll,
Many great skills, well done. Shame the hardening seems to have failed. After quenching there is no way your file should cut the steel if its done properly
Everyone is a fucking expert.
@@dennishanton3181 not everyone, but some of us make knives for a living
@@buzzmeister1983 so don't inmates.
Could be a significant decarb layer though.
@@dennishanton3181 Well, watching and learning comes hand and hand, I know I've learned a lot watching Forged in Fire and numerous TH-camrs forging blades. @buzzmeister1983 is correct. There was no nice "ting" noise when the file scrapped across the blade - it should skate across a hardened blade. I could tell the blade was not hot enough before quenching. Hardening the entire blade would have been risky though with those ported holes on all three sides. This was probably intentional to under harden the blade for that reason.
Outstanding work
Fantastic!!!!!!
amazing work. Useless tool, but beautiful work of art!
Great my friend! This is a masterpiece. Congratulation from Vietnam.🙂🙂🙂
9
amazing cool 😘👍, I hope someday I'll make a movie as
I'm from Vietnam
th-cam.com/video/j2GMKQfacPY/w-d-xo.html
Dịch: Tuyệt vời bạn của tôi! Đây là một kiệt tác. Lời chúc mừng từ Việt Nam.
Good job,amazing
بہت شاندار
Okay, that's different but really nice work!