Awesome vid hybrid! However I will say, hpi does definitely still participate in 10th scale nitro onroad, I just bought a ton of parts for my rs4 3 and 2. And they do still make body’s and wheels and tires and parts and all of that
The parts are pretty hard to come by at least here in the north east. I haven’t been to brownies hobbies in a while (Staten Island, NY), but recently went to a store closer to me in NJ looking for replacement spur gears, HPI high temp grease, brake disc, and possibly replacement parts for my 18ss engine (RS4 3 Type SS car) and they didn’t have much of anything for HPI and they’re one of the few HPI authorized dealers here in NJ/PA. Gonna be ordering my stuff on eBay to fix my car.
i had an FW-06 with a Benz Touring body when i was a teenager. honestly, other than a different body and a black cooling block, i am surprised how little has changed since i bought mine in 2011.
thank you my dude! I really appreciate that! I'm glad you like the video format, it has to be fun for me too, you know!! Modern TH-camrs think of this as a job, and dont care, but here we try to care about everybody and very nitro! lol. See you on the next one!
2 speed baby love the videos as always nitro gang I've got about 20 or more nitro's i need to do videos on now so this years im going to get my TH-cam channel kicking and get all my nitro's running and do videos on them i cant wait i love nitro's 2 speed bay
hey my dude!! I agree!! I bought one and will soon be building the kit I got myself. These are pretty fun for an under 300 dollar kit you know! NitroGang!
hey dude! Very good observation, you're correct. I noticed that right after this recoding too. I think there was a minor assembly error with the fuel tank, because it was mounted in the incorrect location (we fixed t after). Luckily no leaks and its fine now.
@@hybrid32494 all good. I just got done building one yesterday lol and I was watching your video over and over because I was so excited about running mine and I seen this white stuff and I just wanted to caution you I’m sure you seen it and I just wondered what was going on
I have an FW-05T with the same 2 speed transmission and i have a question: If you tighten the cap screw, will the 2nd gear change in lower or higher RPM?
Hey man, I’m happy to know you have a proper Sickning rovan on the way, that’s a tough choice to 45 or the 30. To be honest with you I started out with a 30 cc model and it never let me down.
@@hybrid32494 yes sir! 👏 I’m very much so looking forward to it. They resemble being of quality and are actually priced competitively. I’m planning on going 45 I believe, I ordered a nylon one by accident. So I’m seeing what happens next! Have you boughten any of their short course modes
hey dude! Let me answer you, YES! you most definitely can use any starter box. There is good room for the starter box though the chassis and you should have no issues with that.
That’s wasn’t his first burnout. If I had to guess I’d say most of those marks were his. Whose nice Hobao Hyper SS Truggy did we see in the last few seconds of the video? What’s the relevance?
hey dude! The guy told me it was his first, but I really doubt it also! He needs a nitro to do some proper NITROGANG burnouts!! That would count. Yup there will soon be a Hyper SS Truggy video premier, thats why.
If its anything like the HPI one, there's 2 screws. One you tighten fully so the 2 gears grip onto the shaft, and the other determines when it shifts. Tighten both all the way in then loosen the shifting one out 3 full turns.
@@rclatino3442 One other thing to check is that the part with those 2 screws in it is fitted the correct way round. I know on mine it's easy to put it in backwards if you're not careful, then the little arm on it that flicks up to engage the 2nd gear has nothing to catch on.
hey man! The Owner who built this kit is featured in this video as you saw, he said it was not bad. I have a brand new one of my own also btw. He said a couple ours a day for 3-4 days, so very reasonable.
Awesome vid hybrid! However I will say, hpi does definitely still participate in 10th scale nitro onroad, I just bought a ton of parts for my rs4 3 and 2. And they do still make body’s and wheels and tires and parts and all of that
The parts are pretty hard to come by at least here in the north east. I haven’t been to brownies hobbies in a while (Staten Island, NY), but recently went to a store closer to me in NJ looking for replacement spur gears, HPI high temp grease, brake disc, and possibly replacement parts for my 18ss engine (RS4 3 Type SS car) and they didn’t have much of anything for HPI and they’re one of the few HPI authorized dealers here in NJ/PA. Gonna be ordering my stuff on eBay to fix my car.
i had an FW-06 with a Benz Touring body when i was a teenager. honestly, other than a different body and a black cooling block, i am surprised how little has changed since i bought mine in 2011.
Your videos are so much more entertaining and real world informative …than others. Thanks again Brother!
thank you my dude! I really appreciate that! I'm glad you like the video format, it has to be fun for me too, you know!! Modern TH-camrs think of this as a job, and dont care, but here we try to care about everybody and very nitro! lol. See you on the next one!
Great coverage on the Kyosho FW06
thank you my dude! Happy to have you here!
Love the channel ❤❤ two speed all the way
I will yell 2-speed BABY for you today bro! Thank you for being a channel viewer and supporting the NItroGang struggle to make nitros great again!!
2 speed baby love the videos as always nitro gang I've got about 20 or more nitro's i need to do videos on now so this years im going to get my TH-cam channel kicking and get all my nitro's running and do videos on them i cant wait i love nitro's 2 speed bay
Sickening Kyosho action👍Buy 'em while you still can
hey my dude!! I agree!! I bought one and will soon be building the kit I got myself. These are pretty fun for an under 300 dollar kit you know! NitroGang!
Still running and enjoying my Kyosho pureten alpha from like 2001. That and my RS4 3 with the 2 speed babyyyy
great video my dude love it
Nice runs!... What's up with the fuel tank looking like its rubbing on the front middle drive shaft at 12:57?
hey dude! Very good observation, you're correct. I noticed that right after this recoding too. I think there was a minor assembly error with the fuel tank, because it was mounted in the incorrect location (we fixed t after). Luckily no leaks and its fine now.
@@hybrid32494 all good. I just got done building one yesterday lol and I was watching your video over and over because I was so excited about running mine and I seen this white stuff and I just wanted to caution you I’m sure you seen it and I just wondered what was going on
Bro you got me spending all my cash on Nitros ! Hahah thanks for the video my guy. Two speed baby !!
I have an FW-05T with the same 2 speed transmission and i have a question: If you tighten the cap screw, will the 2nd gear change in lower or higher RPM?
How is this compare to hsp flying fish you tested earlier? I knew the kyosho chassis is better but how about the engine?
Got a rovan on the way today, it’s a tough debate between the 45cc rtr buggy or 30.5. Savage is purring like a kitten and I’m ready for the sand!
Hey man, I’m happy to know you have a proper Sickning rovan on the way, that’s a tough choice to 45 or the 30. To be honest with you I started out with a 30 cc model and it never let me down.
@@hybrid32494 yes sir! 👏 I’m very much so looking forward to it. They resemble being of quality and are actually priced competitively. I’m planning on going 45 I believe, I ordered a nylon one by accident. So I’m seeing what happens next! Have you boughten any of their short course modes
Hey Hybrid, been wanting to build myself a 1/10 touring car... What do you know about the Kyosho V-One?
I changed out the kyosho header for the traxxas .15 header that was on the tmaxx or 4tec
A locked front differential seems crazy. I bet it is prone to breaking with all that nitro power. I prefer an open diff.
Hello bro can you tell me the carburetor setting because mine is not working very well...
I’m gonna have to buy one of these Nitros nice video
Great content ❤nitrogang
thank you my dude!
Does anybody know if you can use a starter box instead of pullstart for kyosho fw06
hey dude! Let me answer you, YES! you most definitely can use any starter box. There is good room for the starter box though the chassis and you should have no issues with that.
Nice .15 Force motor on that car! Force is the best!
Thanks for checking this video out my dude, so far the Kyosho engine is running great I have nothing to complain about, see you on the next one man
Just some constructive criticism I don't like the smoke scenes in between each shot change
I do love the onboard video though
hey bro! I always welcome your constructive criticism, and usually agree with it. IN this case I went a little "TOO SMOKEY" with the transitions, lol.
I love your videos bro.
Thank u my dude!! Gotta keep on making great nitro vids to the end u kno!! Btw there was a recent new fw-06 video on another one u shud check out.
That’s wasn’t his first burnout. If I had to guess I’d say most of those marks were his. Whose nice Hobao Hyper SS Truggy did we see in the last few seconds of the video? What’s the relevance?
hey dude! The guy told me it was his first, but I really doubt it also! He needs a nitro to do some proper NITROGANG burnouts!! That would count. Yup there will soon be a Hyper SS Truggy video premier, thats why.
2 speed baby!
major 2-SPEED baby shifting action on this one bro! thanks for checking out this video, more on this model soon!
@@hybrid32494 I have the exact same model with the exact same body shell :D
Are the diff's sealed? I would love it if the diffs are sealed.
Love it bud I got kyosho Fazer nitro bud
thank you bro! I'd love to pick up a faker one day hopefully. Interesting how the USA and the UK has a totally different kyosho supply, lol right!
@@hybrid32494 yeah we had ansmann thunder tiger other brands usa had different rc brands makes for interesting topic bud
@@hybrid32494what would be the best nitro onroad car? Something that still has parts available n bodies to choose from. N has decent ground clearance?
Sickening video 👍
thank you my dude! happy to have you here! I'm planning on doing a proper SPEED TEST with this Sickening nitro kit soon!!
@@hybrid32494 I look forward to that one, you can't kill a kyosho Nitro (even if it's a new build) 😂
You have any idea on the top speed?
Did I just notice the headlight stickers put upside down? lol
Running great 2 speed is all you need 👊👍
I can't get mine to shift
Help me out
How you set up the transmission?
If its anything like the HPI one, there's 2 screws. One you tighten fully so the 2 gears grip onto the shaft, and the other determines when it shifts. Tighten both all the way in then loosen the shifting one out 3 full turns.
I tried to that already but nothing happened
I have put it apart 7 times trying to figure out
But I will try that again
Thank you
@@rclatino3442 One other thing to check is that the part with those 2 screws in it is fitted the correct way round. I know on mine it's easy to put it in backwards if you're not careful, then the little arm on it that flicks up to engage the 2nd gear has nothing to catch on.
SICKENNING!
thank you my dude!
Got one !
Wow that was fast! how long did it take for you to build it? Edit+ Ah it's not yours 😅...
hey man! The Owner who built this kit is featured in this video as you saw, he said it was not bad. I have a brand new one of my own also btw. He said a couple ours a day for 3-4 days, so very reasonable.
I was going to say the same lol
Hi where is the location of the parking lot?
hey buddy! This is located in New DORP in Staten Island NY. It is right behind New Dorp High School
@@hybrid32494 Thanks!
Am I the only one that thinks it shifts to quick? Sounds like it needs a little more RPM IN FIRST GEAR before it shifts. But I could be wrong
freekin awesome man love that body❤
thank you my dude!! Rumor is this fw-06 could be getting a THS pipe upgrade along with another Sickening body!! Also a SPEED TEST will be here soon.
Cheguei carro 🚗 nitro 😊😎👍🏻🤛🏻😃
🏎💨💨💨🔥
that guy was on crack or something