How to Replace Rear Shock 2003-2008 Toyota Corolla

Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASH...
New Shock Absorber Set from 1AAuto.com 1aau.to/ia/1ASS...
This video shows you how to install a rear shock on your 2003-2008 Toyota Corolla. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• Pry Bar 1aau.to/oPH/1AX...
• 14mm Socket 1aau.to/obiQ/1A...
• 17mm Socket 1aau.to/obiQ/1A...
• 19mm Socket
• 21mm Socket
• Strut Spring Compression Tool
• 1/2 Inch Impact Gun 1aau.to/oqr/1AX...
• 3/8 Inch Impact Gun
• Socket Extensions 1aau.to/obiQ/1A...
• Swivel
• Torque Wrench 1aau.to/oawP/1A...
• Brake Grease
• Gloves 1aau.to/oQX/1AX...
• Safety Glasses
• Floor Jack 1aau.to/oXg/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Toyota Corolla 9th Generation 2003-2008: • Toyota Corolla 9th Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@I-sed-no]

I highly recommend just buying KYB quick struts. Don't mess around with the springs unless you have the tools to compress them safely. Not worth the effort. Great video

[@eyyo2561]

Good job….hi from Prince George, BC

[@adriancastle9229]

I noticed a corroded spring in the spring compressor. Noticed new spring when fitting it to the car.🤔

[@herseydenazaz5168]

Thanks

[@Myerp117]

what should i do if the coil spring is in the way of putting a socket on the underside bolt at the top mount

[@MAURICIO.64]

Cuánto torque en las tuercas?

[@maxwellemmanuel837]

What is the size of the alley key?

[@gemubezu5425]

Great job

[@alexanderstefanxandraswedi5835]

❤ Nice job

[@deadline7610]

Nicely Done.
Thanks