Tire Bead Won't Seat? || Best Bead Seating Trick
ฝัง
- เผยแพร่เมื่อ 26 ม.ค. 2021
- Seating a stubborn tire bead on a Michelin Defender using a bicycle tube. This tire changer is a Twin Busch tw-x98. Check out my channel for a full length mount and balance.
- บันเทิง
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 1](http://i.ytimg.com/vi/Qs5zdBqLn_8/mqdefault.jpg)
Clever technique by some clever guys. Love this solution
Thank you for this. I’d spent three fruitless hours trying to seat a difficult tyre on an alloy wheel - none of the usual tricks worked. I didn’t have a bike inner tube lying about, but managed to do it with a trailer wheel inner tube. Worked perfectly! 👏
Amazing! We were stuck on our last tire, called it a night. Next morning found an extra bike tube and it worked on the first try! I just put the tire lube paste on it and bang! Tire set! Thank you for doing this video, you were a life saver! Appreciate it!
Thanks for the video, I was struggling with a set of tires and this worked perfectly! No finger pinch hazard, the tube popped out as it was seating.
YES YES YES! Worked the first time when nothing else did. THANK YOU!
I used this trick tonight. Work like a champ. I have a bead blaster on my machine & it wouldn’t seat the tire. This did it with regular air chuck.
i just wanted to say thank you for saving my day, i was mounting 4 38x15.50 20's on 20x12 wheel, i did 3 of em fine with the starter fluid explosion but the 4th one would not work, i did this trick and i was done in 5 minutes, i did it with a 20 inch inner tube which was sort of tight around the 20x12 wheel but it did the job, this is a trick ill never forget
You're very welcome. Thanks for the encouraging words and thanks for watching.
Carlisle ST185/80R13 trailer tire beads were very close together. Out of 4 tires, got two the usual way, but couldn't seat the last two. Tried the usual methods of moving around on the rim and restraining outside with strap - nada. Got a 16" bicycle tube and tried this method - presto! Even when the bead popped on, the lubed up tube still came out intact to use again. Saved me further aggravation. Thanks!!
You're welcome! Thanks for watching and for the comment. I'm still using the same tube from this video years later. I've also developed a homemade bead blaster featured in my other tire videos.
My car trailer tires were strapped tight and made mounting impossible. I used tire spreaders with blocks of wood.
How does this video only have 45 likes? This helped me out with my issue. The tire beads were too narrow on my new tires. Thanks guys.
Great question! Thanks for watching, subscribe if you're interested.
Indeed this worked for me as well. Thanks so much!
Dude this worked great. Wasnt worth getting a bead blaster for the once every 3 yrs I need it.
I did run a thin ratchet strap around the tibe before putting it in place. Made it much easier to pull the tube out without risking my pretty little fingers.
I used a 16 inch inner tube for a 15 inch wheel. And it stretched around it perfectly.
This totally saved my ass. I struggled with a set of Coopers using different methods. Went and got a couple tubes and within minutes we had all 4 fully seated!
Love to hear it. Thanks for watching
Great trick. I had not seen this one before.
Cool trick man!!
I wanna try this, gotta pick up this tube asap! I’ve tried all the things you listed at the start of the video. Nothing came to work not even the ratchet straps! But hopefully this does I could see how it works to block off the air from escaping so it seats. So does the back of the tire seat on its own? Like the part facing inside the car towards suspension? I’ve wondered if I have to mess with that but it looks like you didn’t have to at all, just the face of the wheel and boom.
Worked for me today - 20 inch LT Grabber tires!
Nice trick.....I'm having those same problems with a very big gap between my wheel and the tire. What size was the wheel and what size tube did you use?
Nice trick. Could have done with this today
Nice video !
Yes this idea works on me. Thank a lot❤
They sell a ring that's rubber and looks like a tire tube but is solid to do this trick. My trailer tires had thicker side walls and none of these tricks worked, so I bought a pair of tire expanders designed to repair tires. I put blocks of wood holding tires spread out. Once I removed blocks a week later tires inflated.
Thanks a lot ❤
Oh wow real 200IQ move, i'm speechless !
Worked for me as well
Starts at 1:50 :)
Can I do over 50psi ?
Great idea! using the smaller tube to seal the gap. 👍
I use soap water cloth only ifixit tyre
You all should look at a recappers plug also known as a quick air. You pull the valve core, thread the recapper plug on the stem, and hook the airline directly to it, most tires won't even need a Bead blaster using a recapper plug. More than likely if the core was out and the Bead blaster didn't seat it then someone didn't use the Bead blaster effectively. I've used a quick air, with the core out, and a blaster to seat tires that the beads were within an inch of touching. If you couldn't get that to seat using thick tire compound then someone doesn't know how to pack soap in against the tire and rim effectively. Lastly, your tire mounting machine is regulated usually to about 50 to 60 lbs at most. Direct airline will normally put out 125 to 150 psi. Volume is everything when trying to get the tire to seat. No need trying to lose fingers between the rim and the tire trying to fish that tube out. Just my personal opinion, when there are more safe and effective ways out there.
Thanks for the info
Was the other side of the tyre out aswell? Or was the other bead set when you done the tube?
Neither side was set
@@BlakesGarage1 Thanks, Will give it a try tomorrow
Does the inner tube need to be pumped or can it be deflated?
It will need a little bit of air to have some rigidity and stay in place but very little air.
@@BlakesGarage1 Understood! Thank you so much!
Getting fingers pinched is #1 risk!!!
Watch out for your fingers
😂 I can tell you guys are new to this
watching you two have your fingers so close to the bead seat as you are filling the tire was too much for me to keep watching...
You pay for the whole seat but only need the front half!
A 17" tire but more like a 19" 🤣
LOL!!!
Great way to loose your fingers
That’s exactly what I was thinking haha
That’s not seating it’s sealing the tire bead .
Not exactly
I am a trained tire tech. Michelin doesn't have a hard sidewall. Why wouldn't a blaster work
I'm a trained everything tech. Too stiff on a narrow drop center rim. First tire took 4 hours and wouldn't seat, last 3 took 45 minutes with this trick. Thanks for watching!
Finger remover three thousand…
I was cringing watching them stick their fingers in there when the air was flowing. Yikes!
Press down... Yea that's easy if you have that machine
I was about to try with plastic