Drilling is not required. The rear most hole is large enough for the screw/wire part. It just puts the fat part of the blinker to the rear instead of to the front like in the vid.
just picked up mine going to install now .i dealt with Nate he was great can't wait to get it done. i been ordering parts from you guys not knowing we were neighbors will be doing more business.
Hi TST, i just received mine in the post. I live in Australia and used your helpful guide to fit them. However it appears the connection doesnt fit because there is a small yellow spacer/clip on the inside of the connection to the bike. it makes the hole too small to fit your OEM connectors. Its probably a stupid question but do you know if the yellow clip can just come out?? i can forward pics. it would help a lot!
Hi I ordered mine to the uk and the connecter also doesn’t fit even taking the yellow spacer out still doesn’t fit so would need to buy a separate one off eBay with a resistor as also don’t have a relay on uk models 👍
According to my reasearch the OEM signal pad shape is the same as later years so it matches our flushmounts. Those can be found here: tstindustries.com/tst-led-front-flushmount-turn-signals-suzuki-gsxr-gsxs1000f.html More research led me to discover that our flasher relay that is verified for 2004+ use is the same relay on the 03 750. Link: tstindustries.com/tst-suzuki-7-pin-led-flasher-relay.html Again, through research, I found that our Yamaha and Suzuki DRZ400 harness adapters are the ones that supposedly work for the 03 GSXR750. Link: tstindustries.com/tst-suzuki-drz-front-signal-harness-converters.html This information is all gathered using research. I don't have the bike here so I cannot verify 100%, but you have the bike so you can look and verify. Please look at our product pages and compare to what you've got on your bike. Please do not make a purchase if you cannot verify fit ahead of time.
Hello!! I just buy a Gsxr 1000r abs l7, but under the seat not there are any relay, I mount a Lightech Secuencials but I dont see the relay mount resistances but dont work anythink, is very fast and the secuencial dont work correctly. There are any solution? There are a resistances especific of Lightech, is posible this work ok? Sorry for my english! Congratulations!
For the front signals? If so, it is a possibility. Be sure to keep an eye out in the coming weeks for a new product we're releasing that will enable that.
Oh man...my memory does not span that far back. In those days we typically used the Lockhart Philips "flush" mounts that stuck out from the fairing and you had to put two holes in the fairing to fasten them to the bike. I haven't had those through this shop in a while. Loved riding those bikes though. They are a great machine....especially for that time period. Other manufacturers struggled to match that performance.
So, mine didn't come with any of that stuff. Just bare wires and cheap crimp connectors. That's kinda shitty (I'm seriously done with sportbiketrackgear,com Their customer service seems nonexistent). That's who I ordered them from.
Do you care to share what you paid for those where you got them? Ours cost 17.99, but if you want them with the OEM connection kit they cost 23.73. They also come with detailed installation video and we have customer support staff on call all day to help our clients.
@@TSTindustries I bought them, as I said, from sportbiketrackgear.com ,they were $14 which I grant is cheaper but I would have gladly paid a little more. I'm sure I can get them installed but I'd like to buy the connectors. I'd like to have known that was an option. I'm probably not going to order anything from them anymore because this is the second item I have purchased out of maybe five items and they have not replied to my attempts at e-mailing or communication with them. I'm going to try one more time but in the mean time, can I order those connectors? Can you help me out with the link? And thank you for the prompt reply. I appreciate that in this day and age.
@@TSTindustries so, apparently these are made by hotboddies racing. My mistake. I think yours are better by far and ill probably be ordering a pair from you. Sorry about the mistake.
The main reason we don't include them with OEM connectors is to make them more universal. Not all bikes that use this signal use the OEM Suzuki plug and the same goes for our Honda and Yamaha flushmounts.
I have a 23 model. My daughter is in the USA, I'm in South Africa. I've spent a fortune getting this junk to my country. The extra cable I paid 12 usd for doesn't fit my bike. The flanges of the plastic nuts are too big, touching protrusions on the inside of the fairing. I struggled to tighten them and in the process broke the threaded part off the indicator. I bet this is Chinese crap. I can't believe this is American. It doesn't cover the 2nd hole properly either. My invoice says this is for a Yamaha, but nowhere on your website does it say so. It's totally misleading. I'm deeply disappointed. I've made the holes bigger for no reason. Who can one trust these days? This piece of junk is probably sold on Aliexpress for a dollar.
That Toce exhaust looks badass!
Do NOT, I repeat Do Not use loctite on plastic. This is a awesome product. Shines bright, also do buy the flasher relay, it's so so simple to install.
You can use Vibratite on plastics if you wish to use a thread locking compound.
Drilling is not required. The rear most hole is large enough for the screw/wire part. It just puts the fat part of the blinker to the rear instead of to the front like in the vid.
Do you have any pictures of it mounted like this? I would be curious to see how it looks.
just picked up mine going to install now .i dealt with Nate he was great can't wait to get it done. i been ordering parts from you guys not knowing we were neighbors will be doing more business.
Awesome.
Do y'll have a video how to install full exhaust on this bike or how to take off front plastics
At this time we do not have a video showing how to remove the bodywork or install a full system. We will see if we can work that into our video queue.
TST Industries is simply outstanding..... I always check with you first for my mods!!! If you don't have it....wait a moments, they will soon!! "#1"
We definitely try our best! Thank you for the constant love and support.
I just got mine from y'all love the videos they help out alot I'm sure more than you would even imagine
Have y’all made an integrated tail light for it yet? Or something close to it?
Unfortunately at this time we have been unable to design an Integrated Tail Light for this model.
No type of fender eliminator as well?
Hello could you do a frame slider install on the 2017 GSXR 1000
At some point we will. We are in the process of designing them.
ok cool thanks Ill follow up
Is it possible to make led signals with the running light function like stock? Where they burn steadily whenever the bike is on
It is possible to do that, however the simple and inexpensive signals shown in this video do not have that option.
Hi TST, i just received mine in the post. I live in Australia and used your helpful guide to fit them. However it appears the connection doesnt fit because there is a small yellow spacer/clip on the inside of the connection to the bike. it makes the hole too small to fit your OEM connectors. Its probably a stupid question but do you know if the yellow clip can just come out??
i can forward pics. it would help a lot!
Please send us photos. We will be happy to analyze the issue and get you sorted.
Hi I ordered mine to the uk and the connecter also doesn’t fit even taking the yellow spacer out still doesn’t fit so would need to buy a separate one off eBay with a resistor as also don’t have a relay on uk models 👍
@@karlcox7941any fix for this? I’m in aus and was looking at ordering
TST, I need this for my 2003 GSXR 750. how do I find the lights, harnes and relay for this year?
According to my reasearch the OEM signal pad shape is the same as later years so it matches our flushmounts. Those can be found here: tstindustries.com/tst-led-front-flushmount-turn-signals-suzuki-gsxr-gsxs1000f.html
More research led me to discover that our flasher relay that is verified for 2004+ use is the same relay on the 03 750. Link: tstindustries.com/tst-suzuki-7-pin-led-flasher-relay.html
Again, through research, I found that our Yamaha and Suzuki DRZ400 harness adapters are the ones that supposedly work for the 03 GSXR750. Link: tstindustries.com/tst-suzuki-drz-front-signal-harness-converters.html
This information is all gathered using research. I don't have the bike here so I cannot verify 100%, but you have the bike so you can look and verify. Please look at our product pages and compare to what you've got on your bike. Please do not make a purchase if you cannot verify fit ahead of time.
Hello!! I just buy a Gsxr 1000r abs l7, but under the seat not there are any relay, I mount a Lightech Secuencials but I dont see the relay mount resistances but dont work anythink, is very fast and the secuencial dont work correctly. There are any solution? There are a resistances especific of Lightech, is posible this work ok? Sorry for my english! Congratulations!
Sorry, is the European versión. Im from Spain.
think i could use this on a gsx250r?
Most likely but we have not had that bike in the shop to confirm that.
Hello, can we install DRL in front of this model ?
For the front signals? If so, it is a possibility. Be sure to keep an eye out in the coming weeks for a new product we're releasing that will enable that.
@@TSTindustries im not saying for front signals, im say for DRL lights tha (RR) version have
Does this void warranty?
No. Warranties usually cover crucial frame,motor, wheel components. Not cosmetic changes like signals.
Would they work on my 97 GSXR-750 SRAD?
Oh man...my memory does not span that far back. In those days we typically used the Lockhart Philips "flush" mounts that stuck out from the fairing and you had to put two holes in the fairing to fasten them to the bike. I haven't had those through this shop in a while. Loved riding those bikes though. They are a great machine....especially for that time period. Other manufacturers struggled to match that performance.
where the hell is the 2017 cbr1000rr integrated tailights??? we neeeeed them!!
Once we are able to get one in house, we will be able to continue the design process and see if we wish to proceed.
TSTindustries I will bring you my 2017 CBR 1000rr right now if you are serious
Are you local to Central Florida? We're located near Daytona Beach. Shoot us an email if you're near us. Support@tstindustries.com
TSTindustries I sent you guys an email
sweet and easy to fix
Could I put a 2016 gsx-r100 tail fairing (with the integrated turn signals) on a 2017 gsx-r100?
What a difference 👍🏼
Really? No link to the product?
The product page can be found here:
tstindustries.com/tst-led-front-flushmount-turn-signals-suzuki-gsx-r1000-2017-.html
So, mine didn't come with any of that stuff. Just bare wires and cheap crimp connectors. That's kinda shitty (I'm seriously done with sportbiketrackgear,com
Their customer service seems nonexistent). That's who I ordered them from.
Do you care to share what you paid for those where you got them? Ours cost 17.99, but if you want them with the OEM connection kit they cost 23.73. They also come with detailed installation video and we have customer support staff on call all day to help our clients.
@@TSTindustries I bought them, as I said, from sportbiketrackgear.com ,they were $14 which I grant is cheaper but I would have gladly paid a little more. I'm sure I can get them installed but I'd like to buy the connectors. I'd like to have known that was an option. I'm probably not going to order anything from them anymore because this is the second item I have purchased out of maybe five items and they have not replied to my attempts at e-mailing or communication with them. I'm going to try one more time but in the mean time, can I order those connectors? Can you help me out with the link? And thank you for the prompt reply. I appreciate that in this day and age.
@@TSTindustries so, apparently these are made by hotboddies racing. My mistake. I think yours are better by far and ill probably be ordering a pair from you. Sorry about the mistake.
No worries man. Hopefully in the future you will check our website for any of your parts needs.
@@TSTindustries for sure.
Yall cant make a turn signal that we dont have to drill ?
We technically could but we chose not to sink our resources into making a single model specific signal set.
kinda stupid not to make the wires with oem connectors already... i get it, you want to make more money...
The main reason we don't include them with OEM connectors is to make them more universal. Not all bikes that use this signal use the OEM Suzuki plug and the same goes for our Honda and Yamaha flushmounts.
rikkmode bro I was thinking the same thing
The mirrors look like as if it's suffering from malnutrition. 🙄
That is a funny observation
@@TSTindustries funny but a serious matter
I have a 23 model. My daughter is in the USA, I'm in South Africa. I've spent a fortune getting this junk to my country. The extra cable I paid 12 usd for doesn't fit my bike. The flanges of the plastic nuts are too big, touching protrusions on the inside of the fairing. I struggled to tighten them and in the process broke the threaded part off the indicator. I bet this is Chinese crap. I can't believe this is American. It doesn't cover the 2nd hole properly either. My invoice says this is for a Yamaha, but nowhere on your website does it say so. It's totally misleading. I'm deeply disappointed. I've made the holes bigger for no reason. Who can one trust these days? This piece of junk is probably sold on Aliexpress for a dollar.
This is some BS that I have to drill a larger hole in my plastic.