Love when I randomly stumble upon your videos. Ha. I just grabbed one of these. I will have to get with you on a 9MM barrel and some advice for how to unpin the stock once my Form 1 comes back. Y’all definitely go with JP for Bolt work. He did my PPSH and nailed it. 🙏🤙
In Poland you can buy the stock for 6,71$, stock with the hinge for 22,90$ or all parts of the submachine gun that can be owned without permit plus four magazines for 69,17$.
Love it, built one myself in 9mm as well but if the wire stock is digging in your cheek and you dont care about the folding stock I'd suggest getting a pps42/52 stock end and weld it if you want to comfortably shoot it
You can have all that. It's just licenses and forms you have to fill out and pay. Registering it as a short barrel rifle really isn't complicated at all. Getting your SOT 2 to build it fully automatic will require you to get your ffl first then your SOT 2.
Right now I have a precision Matthew’s pm1130v. Great lathe. I used to use Mig for all my stuff but now I am 100% with an alpha tig 203xi and it works great!
This might be a crazy idea, what if instead of welding on a fake suppressor to meet the 16" barrel requirement, why not just extend the metal handguard to make an elongated pps43 instead? (Not sure what the proper term would be, im looking to build my own)
Yeah that’s an option, people have done it. I think it looks like an anteater and quite ridiculous though lol. Plus a 1 piece 16” barrel cannot be installed after you complete welding, you need to install the barrel before you finish the rear welds. That would make bluing a pain.
@@jackjones9460 it’s an original length barrel from sten parts that I had threaded locally. My shroud is actually about .6” shorter than original so the threads stick out the end so I could pin and weld the extension tube on.
Love when I randomly stumble upon your videos. Ha.
I just grabbed one of these. I will have to get with you on a 9MM barrel and some advice for how to unpin the stock once my Form 1 comes back.
Y’all definitely go with JP for
Bolt work. He did my PPSH and nailed it. 🙏🤙
In Poland you can buy the stock for 6,71$, stock with the hinge for 22,90$ or all parts of the submachine gun that can be owned without permit plus four magazines for 69,17$.
Bout the same here cheapest is 68 usd and avg is 80-110
So can you buy the recievers?
No, just the muzzle shroud, rear part with folding stock latch, grip, trigger mechanism, part of the bolt and magazines.
where can you buy them?
Love it, built one myself in 9mm as well but if the wire stock is digging in your cheek and you dont care about the folding stock I'd suggest getting a pps42/52 stock end and weld it if you want to comfortably shoot it
You should be expensive you are an artist my good man
Great job on the reweld. To bad we can't keep them full auto and have short barrels.
You can have all that. It's just licenses and forms you have to fill out and pay. Registering it as a short barrel rifle really isn't complicated at all. Getting your SOT 2 to build it fully automatic will require you to get your ffl first then your SOT 2.
@@jackbarnes9728
Unfortunately in order to manufacture full autos legally you have to be a government or police dealer.
you can, just keep your mouth shut and dont tell anyone what you got
@@treyowens9674 lol
“You have papers for that?”
“Are those plates Level 4?”
Looks better than the Pioneer Arms ones.
Great video…Question what do you use for your lathe work make & model also what do you use for your welding setup. Thanks
KR
Right now I have a precision Matthew’s pm1130v. Great lathe. I used to use Mig for all my stuff but now I am 100% with an alpha tig 203xi and it works great!
This might be a crazy idea, what if instead of welding on a fake suppressor to meet the 16" barrel requirement, why not just extend the metal handguard to make an elongated pps43 instead?
(Not sure what the proper term would be, im looking to build my own)
Yeah that’s an option, people have done it. I think it looks like an anteater and quite ridiculous though lol. Plus a 1 piece 16” barrel cannot be installed after you complete welding, you need to install the barrel before you finish the rear welds. That would make bluing a pain.
So was this demilled, like cut barrel and reciever and you welded them back together?
Yep, it was basically reduced to scrap metal…legally. Then converted to hammer fired closed bolt semi auto instead of open bolt full auto
O, kei bou!.
Is that the original 7.62x25 magazine and it works for a 9mm?
Yes. Never had any issues at all feeding 9mm with an unmodified magazine.
@@JPMachine Thanks!
Super PPS wz.43 Made in ?????
Originally made in Poland! Remade in the USA!
@@JPMachine 1. Fabryka (6) Hipolita Cegielskiego Poznań. 2. (12) Huta Balidon Katowice. 3.(53) Wifama Łódz. POLAND.
@@marcinbieniek4796 this one was factory (6)
Poznań
@@pannpiotrek (6) Tak HCP Poznań.
Imaging going to war walking off your farm picking this up from a dead guy on a battlefield and just walking into war.... 🤔
How do I find you on ak files?
Search the marketplace. I think my username is cbrkneedrggr
From where did you buy the barrel?
@@jackjones9460 it’s an original length barrel from sten parts that I had threaded locally. My shroud is actually about .6” shorter than original so the threads stick out the end so I could pin and weld the extension tube on.